波形差异反演方法及其在气藏描述中的应用

在油气藏开发中后期,如何利用的已有的勘探成果和丰富的油气藏知识,加深对勘探区域油气开发潜力的认识,为油气田的稳产高产服务,是摆在油气田中后期开发人员面前的难题.油气田开发的研究人员,利用现有的资料,开发出了很多方法,结合地震测井等资料为油气田的稳产高产做出了巨大的贡献.本文在分析了地震波在地质体中传播过程中能量变化,相应的产生了振幅变化的理论,利用三维地震数据,通过对三维地震数据解释层位对应的波形差异的分析,结合工区内的生产井和开发井的对应地层中的油气信息,进行反演得到地层的波形差异数据体,利用相应的绘图软件绘制二维平面图形,结合工区内的沉积相等地质信息对其数据体进行油藏解释,最终得到波形差异反演数据体,利用波形差异反演数据体进行油气藏的识别、描述和预测,为油气田的中后期开发服务.     

安宁河断裂带晚第四纪运动特征及模式的讨论

安宁河断裂带是中国西南地区一条重要的地震活动断层, 地方志记载公元1536年曾发生过震级大于7级的破坏性地震. 详细的断裂地貌航片解译和野外调查表明, 安宁河断裂带除具有主要的左旋走滑断层活动外,还兼有重要的逆冲运动分量. 根据冲沟和阶地面的位错量及其热释光测年结果估计,该断裂带晚更新世以来平均左旋走滑速率为3~7 mm/a. 根据滑移方向与断层走向的关系,推测跨安宁河断裂带东西向由于逆冲断层运动造成的挤压缩短速率约为1.7~4.0 mm/a; 简单分解鲜水河断裂带上的滑动速率,估计分配在大凉山断裂带上的滑动速率与安宁河断裂带上的大致相当,约为3~7 mm/a. 此外,根据野外调查结果,并结合最近青藏高原构造动力学研究的新认识, 建立了安宁河断裂带的动力学模型,认为安宁河断裂带是一条逆冲走滑断裂带. 其下盘（西盘）主动向南东方向下插,造成了上盘（东盘）向北西方向的上冲运动.      

基于迁移学习方法的山东冷云冰晶特征分布研究

为分析冷云中冰晶的分布特征,揭示冰晶增长演变机制,根据冰晶形状和尺度特征分为8类并进行标注,同时标注1类隔断栏进行数据质量控制,将9类标签图像整合并建立图像集,利用迁移学习VGGNet16方法进行识别训练,经训练模型分类准确率达98%。将模型应用到秋季冷云冰晶特征研究中,选取3次积层混合云和3次层状云降水过程,分析冰晶形状在不同温度区间的占比及冰晶谱变化特征,结果表明,温度通过影响冰晶基面与棱面的比值来决定冰晶初始形状分布,相同温度区间积层混合云内球状冰晶和线型冰晶占比高于层状云,低于-12℃后各类冰晶占比相对固定;积层混合云内线型冰晶直径集中在300~800 μm,冰晶谱呈多峰分布,聚合体直径大于600 μm,冰晶谱首尾两端浓度相当,球状冰晶直径集中在120～300 μm,冰晶谱呈单调下降趋势。     

Settling-velocity distributions and sorting processes on a longitudinal dune: A case study

The processes acting on a longitudinal dune are inferred from the response in the area size-sorting characteristics of the sediment of the active layer. The sediment size distributions are determined by settling and are best described by a log-hyperbolic model which provides the most information on size-sorting processes. Size-sorting characteristics are markedly different across the low round-crested part of the dune from cross-sections of the high more sharp-crested part. This results in changes in textural parameters along the lee-side consistent with changes in the lee-side separation vortex. This is the first time that the effect of wind speed up on the lee-side is observed to be reflected in the sediment; it can only be detected with the very sensitive log-hyperbolic parameters.     

A garnet population in Yellowknife schist, Canada

Abstract Data are presented on a garnet population in a specimen of garnet-biotite-plagioclase-quartz schist from the cordierite zone of an Archaean thermal dome in the Southern Slave Province of the Canadian Shield. Garnet crystals are bounded by planar dodecahedral faces and by trapezohedral faces which on the 10-μm scale are corrugated. Crystal distribution, as revealed by dissection of a small cubic volume of rock, is random. The size distribution is normal, with a mean diameter of 0.81 mm and a standard deviation of 0.32 mm. In the largest crystal of the population (mean radius 0.83 mm), [Mn] = 100 Mn/(Fe + Mg + Mn + Ca) decreases from 14.5 at the centre to 7.5 and then increases in the outer margin to 8.5; [Fe] increases continuously from 67 at the centre to 77 at the surface; [Mg] increases from 12.5 to 13.5 and then falls sharply to 11; [Ca] remains unchanged at 4.0 and then drops to 3.3. Progressively smaller crystals have progressively lower [Mn] and higher [Fe] concentrations at their centres, while all crystals have the same margin composition. Growth vectors extending from given concentration contours to crystal surfaces are of equal length regardless of the size of the crystal in which the vector is located. A garnet-forming model is presented in which reaction was initiated by a rise in temperature. Nucleation sites were randomly selected. The nucleation rate increased with time and then declined. Crystal faces advanced at a constant linear rate, which implies an increase in volume proportional to surface area. Initially, the composition of garnet deposited on crystal surfaces was determined by van Laar equations of equilibrium, which demanded the withdrawal of Mn and Fe from within chlorite crystals. This transfer reaction was then accompanied by an ion exchange reaction which moved Mn and Fe to garnet surfaces from biotite, in exchange for Mg. The exchange reaction provides an explanation for the high overall concentration of Mn and Fe in garnet and for the observed Mn and Mg reversals in the margins of crystals. The increase of garnet volume in the garnet population is found to be parabolic, i.e. Vαα⁵.     

Shape analysis and multispectral classification in geological remote sensing

This paper discusses the usage of mathematical morphology in image processing of remotely-sensed data for geologic interpretation. Particular attention is given to noise-reducing transformations of spectral bands before and after different methods of classification, and to the usage of textural context. The development of a viable processing strategy requires a multidisciplinary approach and expert knowledge in different areas: (a) geology, geomorphology, and vegetation in a study area, (b) properties of the sensor for imagery photointerpretation, (c) spectral/spatial properties of the digital data within an integrated dataset (remote sensing and ancillary data), and (d) data-processing tools including mathematical morphology theory. Examples of geometric characterization of Canadian LANDSAT scenes are described in which shape measurements are obtained using a PC-based hybrid image-processing and geographic information system, termed ILWIS, which was developed at ITC, in the Netherlands. Classes from supervised and unsupervised classification are compared to guide in geological mapping. Classes over individual occurrences of broad vegetation-landform units are studied to aid in environmental mapping. Field knowledge is the context necessary to construct expert procedures to drive sequences of data-processing steps toward a target result such as optimal classification, enhancement, or feature extraction. The interaction between expert rules and the image-processing steps can be based on synthetic measurements of shape to quantize the information either spatially or spectrally. Many useful geometrical transformations of spatially-distributed data are extensions or generalizations of spatial analysis functions typical of geographic information systems.     

蒙新高原盐湖资源及盆地结构

通过蒙新高原典型盐湖区的解剖研究，查清了代表性盐湖盆地的相环境及其沉积建造，将盐湖盆地环境的变化形式划分为沉陷型、抬升型和改造型，并归结了盐湖盆地相环境分异与盆地地质结构之间的相互关系，为开发大陆干旱区盆地的盐湖和卤水资源及其环境演化的理论研究提供了依据。     

A three dimensional model of muckpile formation and grade boundary movement in open pit blasting

Summary Formulation and case studies of a three dimensional kinematic model are presented. Thein situ overburden geometry can be simulated accurately and various initiation patterns of blasts can be modelled. The overburden geometry, hole patterns and explosive distribution are all explicit model inputs. Because the effect of explosive properties, rock mass condition and inter-row delay are very difficult to measure in terms of blast performance, these are represented in the model by control parameters which are left for calibration using field data. The output of the model is a three dimensional muckpile shape of any cross section and a contour map of grade distribution within the muckpile. Two case studies are presented which have shown that the model is a valuable tool for optimizing production blasting as well as for controlling grade dilution during blasting.     

从水流挟沙力和河槽形态规律分析黄河调水调沙

在分析水流挟沙力和河槽水力形态规律的基础上，研究调节流量、含沙量和泥沙组成的优化组合，解决河道输沙减淤和河槽相对稳定问题，提出调水调沙方向。达到合理利用水资源和河道减淤与治理相结合的目的．     

滑坡钢筋砼格构防治"倒梁法"内力计算研究

格构锚固技术能有效地控制滑坡深部和浅表破坏,提高锚固体系的整体刚度。目前在格构 锚杆体系的设计中,大多采用经验设计钢筋砼格构,常导致配筋不合理,不仅造成浪费,而且可能埋下工程隐患。本文采用“倒梁法”对格构梁的内力计算方法进行研究,对滑坡防护钢筋格构进行如下简化:(1)锚杆对格构梁的作用以垂向力为主,轴向力可以忽略不计。(2)纵向格构梁的刚度大于横向格构梁的刚度,因而横向格构梁的内力计算可以简化,钢筋砼格构可以作为在锚杆施力下的超静定连续梁。结合三峡工程库区巫山新城秀峰寺滑坡格构防护工程设计,通过“三弯矩方程”进行了格构梁内力实例计算,为格构梁的合理设计提供了依据。