数字抽取滤波器的DSP优化设计

为了降低地震数据采集系统的成本和功耗，采用数字信号处理器（DSP）实现∑-△模数转换器中的数字抽取滤波器算法。通过采取查表法、倒序循环遍历法以及模拟循环寻址法等优化方法，以较低工作频率实现了四通道四级抽取滤波运算，达到了系统设计的要求。     

Shell‐shape and morphometric variability in Mytilus galloprovincialis from micro‐tidal environments: responses to different hydrodynamic drivers

Tidal conditions differently influence inter‐tidal organisms in terms of general physiological and metabolic responses. In this study we investigated the morphological response in shells of Mytilus galloprovincialis native to different micro‐tidal coastal environments in the Northern Adriatic Sea. Our purpose was to highlight the ecophenotypic variability across tidal levels and to elucidate how tidal currents and waves produced by anthropogenic activities may play a part in modulating shell morphology. Three sampling sites were selected: an open‐sea area 15 km off‐shore and two sites within the lagoon of Venice, the first near one of its three inlets, and the other one in the proximity of Venice city centre. At each sampling site, organisms were seasonally collected at different depths within their vertical zonation, either in the inter‐tidal zone – i.e. at both the highest and lowest tide zonation limits, and subtidally. The mussel shells were analysed by investigation of their morphometric relationships (height/length and width/length ratios) and by elliptic Fourier analysis of the shell contours. Shell thickness and condition index were also evaluated for a better comprehension of energy allocation/partitioning. Estimates based on long‐term measurements, visual observation, wind statistics and wave growth laws allowed an evaluation of the forces acting on shells. At the open‐sea site, the observed phenotypic variability of both shell shape and thickness was clearly related to the tidal vertical zonation. At the two lagoon sites, the currents generated by tidal flow through the inlet and the waves caused by the frequent passage of boats influenced both shell shape and thickness. A trade‐off between protection and growth was apparent along the tide gradient, as emphasized by the differences in the partitioning and allocation of energy between shell and flesh production.     

川西龙门山中段彭州式铜矿区构造体系及与成矿的关系

川西龙门山中段彭州式铜矿形成于岛弧构造环境,其形成经历了晋宁期幔源火山沉积和褶皱变形、印支期-燕山期以来强烈的构造挤压和破坏。根据研究区地层形变的各种构造形迹,将区内构造体系划分为北北西向"多"字型和北东向华夏式两种构造体系。"多"字型构造体系是在晋宁期右行剪切作用下形成北东—北北东向的褶皱带,后经印支期-燕山期以来的左行旋转至北北西而保留至今,表现为黄水河群组成的复式背、向斜褶皱带;华夏式构造体系显示了印支期以来北东—南西方向强大的挤压,表现为前期的叠瓦状断裂和后期的"飞来峰"构造。两种构造体系共同控制着彭州式铜矿床的形成及改造。根据二者的平面展布形态、构造出露特征及其动力学标志,将其划分为包容和交接两种复合关系,即"多"字型构造体系包容于华夏式构造体系中,在研究区南部二者呈反接关系。     

洞庭盆地中更新世洞庭湖组砾石特征及其意义

对位于洞庭盆地安乡凹陷东南部的两护村ZKC1孔中更新世洞庭湖组砾石层进行了粒度和砾态的统计分析。结果表明,砾石的粒度变化反映出2个较大尺度的由大→小的旋回,早旋回由洞庭湖组下段砂砾层组成,晚旋回由洞庭湖组中段上部的砂砾层组成,反映出中更新世早-中期安乡凹陷的两次由慢→快的幕式沉降过程。在上述2个大的粒度旋回之上,叠加有多个更小尺度的砾石粗、细变化,主要与气候干湿的频繁波动有关。洞庭湖组中段顶部砾石的磨圆度明显偏低,反映其沉积时期盆地沉降和周缘隆起区抬升活动的增强。     

松辽盆地反转期的界定

松辽盆地的构造反转对油气生成、运移和聚集保存有明显的控制作用.以往的研究认为,松辽盆地晚期经历了嫩江组沉积末期、明水组沉积末期和古近纪的多期反转.通过对松辽盆地北部进行剖面与平面的构造演化分析,认为嫩江组沉积末期为南北向差异升降活动,未引起地层褶皱变形和构造格局的改变,该期形成了区域伸展不整合面;明水组沉积末期松辽盆地从区域拉张转为挤压,盆地表现为东西向缩短,构造格局发生了性质上的变化,形成了一系列反转构造,该期构造反转奠定了盆地现今的构造格局.构造物理模拟实验进一步证明,松辽盆地不同方向的反转构造带为明水组沉积末期形成的.     

深水钢悬链立管疲劳寿命评估分析

在时域内分析深水钢悬链立管在平台运动和波流载荷共同作用下的非线性动力响应;采用雨流计数法处理立管节点应力的时间历程,选用DoE.E型S-N曲线分析立管在单一海况和平台运动联合作用下的疲劳损伤;将各方向含概率分布的疲劳损伤进行叠加,得到立管整体的全方向疲劳损伤及疲劳寿命。平台的运动为六自由度的运动预报数据,波流载荷由某海域实际的波浪统计数据采用Morison公式计算所得。计算结果表明钢悬链立管疲劳寿命的极值点分别位于悬挂点附近和触地点附近,对立管疲劳寿命极值点各方向疲劳损伤分布情况进行了分析。所提方法为钢悬链立管疲劳分析提供了新思路,给出的结论对钢悬链立管设计分析有一定借鉴意义。     

导管架式海上风力发电支撑结构振型扩阶方法

提出1种适用于海上风力发电支撑结构的模态振型扩阶方法。该方法无需借助转换矩阵实现振型扩阶,而是依靠实测模态并通过修正有限元模型对应振型在未测试自由度的振型值而获得空间完备的模态振型,并且所发展的方法在一定程度上可以忽略有限元模型存在的建模误差,是1种直接的估算方法,计算效率相对较高。文中采用三桩导管架式海上风力发电支撑结构验证提出方法的正确性以及在低阶模态振型扩阶上的优越性。数值结果表明,该方法对传感器位置、数量依赖程度低,尤其对于海上风电结构,仅在结构的水深较浅部位布置少数传感器即可比较精确的实现低阶模态振型扩阶,具有良好的工程应用前景。     

�������й�����������ͨ������λ�Ʒ�������ģ��

?????????????????????????????й?????????????????У?????FLAC??3D???????????????????λ?????????????????????????λ??????????????ɡ??о?????????????й???????????????????ж???????λ???????????λ????????????????λ?ò???????????й????λ????????????????????λ?????????????????й???λ??????????????????????????????????     

Dynamics of large-truncated mooring systems coupled with a catenary moored semi-submersible

With the floating structures pushing their activities to the ultra-deep water,model tests have presented a challenge due to the limitation of the existing wave basins.Therefore,the concept of truncated mooring system is implemented to replace the full depth mooring system in the model tests,which aims to have the same dynamic responses as the full depth system.The truncated mooring system plays such a significant role that extra attention should be paid to the mooring systems with large truncation factor.Three different types of large truncation factor mooring system are being employed in the simulations,including the homogenously truncated mooring system,non-homogenously truncated mooring system and simplified truncated mooring system.A catenary moored semi-submersible operating at 1000 m water depth is presented.In addition,truncated mooring systems are proposed at the truncated water depth of 200 m.In order to explore the applicability of these truncated mooring systems,numerical simulations of the platform’s surge free decay interacting with three different styles of truncated mooring systems are studied in calm water.Furthermore,the mooring-induced damping of the truncated mooring systems is simulated in the regular wave.Finally,the platform motion responses and mooring line dynamics are simulated in irregular wave.All these simulations are implemented by employing full time domain coupled dynamic analysis,and the results are compared with those of the full depth simulations in the same cases.The results show that the mooring-induced damping plays a significant role in platform motion responses,and all truncated mooring systems are suitable for model tests with appropriate truncated mooring line diameters.However,a large diameter is needed for simplified truncated mooring lines.The suggestions are given to the selection of truncated mooring system for different situations as well as to the truncated mooring design criteria.     

Deriving airborne laser scanning based computational canopy volume for forest biomass and allometry studies

A computational canopy volume (CCV) based on airborne laser scanning (ALS) data is proposed to improve predictions of forest biomass and other related attributes like stem volume and basal area. An approach to derive the CCV based on computational geometry, topological connectivity and numerical optimization was tested with sparse-density, plot-level ALS data acquired from 40 field sample plots of 500–1000 m² located in a boreal forest in Norway. The CCV had a high correspondence with the biomass attributes considered when derived from optimized filtrations, i.e. ordered sets of simplices belonging to the triangulations based on the point data. Coefficients of determination (R²) between the CCV and total above-ground biomass, canopy biomass, stem volume, and basal area were 0.88–0.89, 0.89, 0.83–0.97, and 0.88–0.92, respectively, depending on the applied filtration. The magnitude of the required filtration was found to increase according to an increasing basal area, which indicated a possibility to predict this magnitude by means of ALS-based height and density metrics. A simple prediction model provided CCVs which had R² of 0.77–0.90 with the aforementioned forest attributes. The derived CCVs always produced complementary information and were mainly able to improve the predictions of forest biomass relative to models based on the height and density metrics, yet only by 0–1.9 percentage points in terms of relative root mean squared error. Possibilities to improve the CCVs by a further analysis of topological persistence are discussed.