A rational approach to seepage flow effects on bottom friction beneath random waves

The bottom friction beneath random waves is predicted taking into account the effect of seepage flow. This is achieved by using wave friction factors for rough turbulent, smooth turbulent and laminar flow valid for regular waves together with a modified Shields parameter which includes the effect of seepage flow. Examples using data typical to field conditions are included to illustrate the approach. The analytical results can be used to make assessment of seepage effects on the bottom friction based on available wave statistics. Generally, it is recommended that a stochastic approach should be used rather than using the rms values in an otherwise deterministic approach.     

Granular experiments of thrust wedges: Insights relevant to methane hydrate exploration at the Nankai accretionary prism

The accumulation mechanism of methane hydrates has been a central issue in previous hydrate research regarding the Nankai accretionary prism, southwest of Japan. Expulsion of formation fluids is significant during the prism accretion process, and the migration of these methane-bearing fluids exerts a strong control on the accumulation of hydrates. Two types of fluid pathways, inter-granular porosity and faults, need to be evaluated to understand hydrate accumulation. Fluid migration along faults can be partly modeled by examining faulting activity. Our study modeled the accretion process by using two granular methods that approximated the geologic body as an assemblage of particles: (1) analog experiments using granular materials, and (2) a numerical simulation based on the distinct element method. The analog experiments closely reproduced the prism geometry observed in seismic profiles across the Nankai accretionary prism. Digital image correlation analysis indicated that the frontal thrust is generally active but older structures are also frequently reactivated. The numerical simulations produced prism geometries similar to those of the analog experiments. The velocity distributions of the particles showed evidence of episodic faulting and reactivation, but the internal stress field exhibited little change in the deeper part of the prism during deformation. The frequent and substantial changes in fault activity displayed by the models indicate episodic fluid flow along fault surfaces. Active frontal thrusting suggests that formation fluids generally migrate from deep within the prism to the deformation front, but may move along reactivated older faults. Inter-granular permeability also fluctuates, as it is controlled by temporal and spatial variations in the internal stress field. However, fluid flow is likely to be relatively stable in the deeper segment of the prism.     

Field Study on the Behavior of Destructive and Non-Destructive Piles Under Compression

This paper presents a series of full-scale load tests on long bored piles instrumented with strain gauges along the shafts, including eight field tests of piles loaded to failure and one non-destructive pile load test. The load-displacement response, skin friction, end resistance, and the threshold of the pile-soil relative displacement for fully mobilizing skin resistance were discussed. A simple softening model was proposed to describe the degradation behavior of the skin friction along the pile-soil interface and the load-displacement relationship developed at the pile base. It is found that the shaft resistance degradation investigated in the non-destructive load test only occurs at a shallow depth, and the skin friction of deeper soil is not fully developed. However, unlike the results of the non-destructive load tests, the softening is accompanied by a reduction in skin friction and observed to be along the whole pile depth. The thresholds of pile-soil relative displacement for fully mobilizing skin resistances in different soils have been found to be in the range 0.6% to 2.4% of the pile diameter. Moreover, in practical applications, a bilinear model is assumed to be feasible in analyzing the load-settlement relationship developed at the end of non-destructive pile, whereas the load transmission curve of the soils below the pile base corresponds to a softening model in the field tests of piles loaded to failure.     

Critical Top Tension for Static Equilibrium Configuration of A Steel Catenary Riser

This paper aims to present the critical top tension for static equilibrium configurations of a steel catenary riser（SCR） by using the finite element method. The critical top tension is the minimum top tension that can maintain the equilibrium of the SCR. If the top tension is smaller than the critical value, the equilibrium of the SCR does not exist. If the top tension is larger than the critical value, there are two possible equilibrium configurations. These two configurations exhibit the nonlinear large displacement. The configuration with the smaller displacement is stable, while the one with larger displacement is unstable. The numerical results show that the increases in the riser＇s vertical distances, horizontal offsets, riser＇s weights, internal flow velocities, and current velocities increase the critical top tensions of the SCR. In addition, the parametric studies are also performed in order to investigate the limit states for the analysis and design of the SCR.     

海泥环境中阴极保护的边界元计算

根据阴极保护的特点,建立了用于数值计算的模型;采用边界元方法对海泥介质中的阴极保护系统进行了计算,获得了海泥中钢管表面以及海泥介质内部的电位分布。将计算的结果与测量的数据进行比较,两者具有较好的一致性。     

Estimation of Land Subsidence Based on Groundwater Flow Model

This article presents an approach for estimating land subsidence due to withdrawal of groundwater. The proposed method calculates the groundwater seepage in 3-D-condition and calculates the land subsidence one-dimensionally. The governing equation on groundwater seepage is based on the three-dimensional mass conservation law and the principle of effective stress. The land subsidence calculation method is derived based on the following assumptions: (1) displacements occur only in the vertical direction, and (2) in vertical direction the total stresses do not change. The governing equation is solved by numerical method, i.e., finite element method (FEM) in spatial discretization and finite difference method (FDM) in time series discretization. In FEM Galerkin method is adopted and in FDM, lumped matrix method is employed. The proposed method is calibrated via analyzing 1-D consolidation problem and the results are compared with those from Terzaghi's one-dimensional consolidation theory and oedometer test. The proposed method is employed to analyze the consolidation of a soft layer due to withdrawal of groundwater from an aquifer under it. Moreover, this method is also applied to a field case of land subsidence due to groundwater pumping in a gas production field in Japan. The analytical results are compared with the field observed data. The results show that this approach simulates the field case well.     

Evaluation of Bearing Capacity for Multi-Layered Clay Deposits with Geosynthetic Reinforcement using Discrete Element Method

A stability analysis of reinforced foundation soil is presented in this paper. A method based on the discrete element method (DEM) is suggested for calculating the bearing capacity on strip footings over multilayer soils reinforced with a horizontal layer of geosynthetics. The proposed method can estimate the ultimate bearing capacity and the distribution of tensile force developed in the geosynthetics of the footing system by Winkler springs to account for the compatibility between soil blocks and tensile elements to consider the tensile behavior between soil and geosynthetics. For footings on various multilayer soils with or without reinforcement of geosynthetics, the results of the method were compared to the field test results as well as to those obtained by various methods proposed by other researchers.     

Three-dimensional liquid sloshing in a tank with baffles

A numerical model has been developed to study three-dimensional (3D) liquid sloshing in a tank with baffles. The numerical model solves the spatially averaged Navier-Stokes equations, which are constructed on a non-inertial reference frame having six degree-of-freedom (DOF) of motions. The large-eddy-simulation (LES) approach is employed to model turbulence by using the Smagorinsky sub-grid scale (SGS) closure model. The two-step projection method is employed in the numerical solutions, aided by the Bi-CGSTAB technique to solve the pressure Poisson equation for the filtered pressure field. The second-order accurate volume-of-fluid (VOF) method is used to track the distorted and broken free surface. The baffles in the tank are modeled by the concept of virtual boundary force (VBF) method. The numerical model is first validated against the available analytical solution and experimental data for two-dimensional (2D) liquid sloshing in a tank without baffles. The 2D liquid sloshing in tanks with baffles is then investigated. The numerical results are compared with other results from available literatures. Good agreement is obtained. Finally, the model is used to study 3D liquid sloshing in a tank with vertical baffles. The effect of the baffle is investigated and discussed.     

Analytical method of radiation by a wave energy device with dual rectangular floating bodies

The system with one floating rectangular body on the free surface and one submerged rectangular body has been applied to a wave energy conversion device in water of finite depth. The radiation problem by this device on a plane incident wave is solved by the use of an eigenfunction expansion method, and a new analytical expression for the radiation velocity potential is obtained. The wave excitation force is calculated via the known incident wave potential and the radiation potential with a theorem of Haskind employed. To verify the correctness of this method, an example is computed respectively through the bound element method and analytical method. Results show that two numerical methods. are in good agreement, which shows that the present method is applicable. In addition, the trends of hydrodynamic coefficients and wave force are analyzed under different conditions by use of the present analytical method.     

非稳腔主动式直接获取纳秒近似无衍射贝塞尔绿光

通过对基于轴棱锥的贝塞尔谐振腔和贝塞尔-高斯谐振腔的研究,设计了一台腔内倍频Nd:YAG纳秒近似无衍射贝塞尔绿光激光器. 非稳激光器谐振腔由轴棱锥和凸面镜组成. 实验采用单灯脉冲抽运激光增益介质Nd:YAG晶体,倍频晶体选用KTP. 当抽运电压为350 V时,由主动式直接产生纳秒近似零阶贝塞尔绿光,其脉冲宽度为55.1 ns,波长为532 nm,线宽为0.8 nm,近似无衍射零阶贝塞尔绿光的中心光斑直径为192 μm. 利用Fresnel-Kirchhoff 衍射积分和Fox-Li迭代法,通过数值计算得出