珠江河网横向汊道水面线演变过程及原因探讨 ——以东平水道为例

基于1960-2016年东平水道三水、紫洞、澜石、浮标厂月均潮差、余水位数据及三水、马口站月均流量数据,以1993年三水-马口分流比突变为切入口,探讨余水位坡度及潮波衰减率等径-潮动力改变下,东平水道水面线与余水位曲率的时空演变特征及其影响因素.结果表明:东平水道在1993年三水分流比剧增之后,1)余水位坡度或潮波衰减...     

夯扩桩成桩过程引起的挤土效应分析

夯扩桩在成桩过程中会产生挤土效应。通过采用柱形孔扩张理论，推导出砂土中形成扩大头时引起的挤土影响半径和土体位移，并对一工程实例进行了分析。     

基坑土钉墙支护施工与监测——陕西省人民医院门急诊医技大楼

本文介绍了土钉墙在陕西省人民医院门急诊医技大楼基坑支护中的应用,简述了工程设计方法,总结了施工经验,并对基坑支护体系变形观测结果进行了分析     

Use of fly ash with no water consumption for cold regions transportation infrastructure

The construction period in cold regions is very short due to problems related to excavation and use of frozen soils in embankment construction, which leads to excessive deformations upon thawing. Also, handling of compaction water is critical due to freezing temperatures. Coalburning thermal power plants are very common in cold regions to supply electricity. The inorganic part of the pulverized coal after burning produces fly ash, which is available in large volumes. Due to excavation difficulties and the poor engineering behavior of frozen soils in cold regions, the utilization of fly ash when it is readily available must be promoted. Any construction technique which utilizes alternative materials like fly ash and minimizes water consumption has a potential to extend the short construction season and even allow service and maintenance during extreme weather conditions. This paper presents two potential techniques to solve the moisture affinity of silt-sized materials like fly ash. One technique involves in-plant production of fly ash pellets using cold-bonding pelletization to manufacture aggregates of up to 40,000-μm diameter from 15- to 60-μm-diameter fly ash grains. Large disc pelletizers have annual production capacities of up to one million ton at a reasonable cost. The product has adequate strength for embankment construction even when no water is used and no compaction is applied. The second technique is an in situ mixing technique which uses snow instead of compaction water for fly ash. The snow is the main element in this technique to compact the embankment. Water is needed for the hydration reactions to form cementitious minerals in fly ash. The slower the hydration reaction, the greater the crystal growth of cementitious minerals. In the proposed technique, in situ snow is mixed with fly ash and is compacted on-site. The temperature increase due to the hydration reaction of fly ash upon contact with snow crystals provides water for continued long-term hydration, which results in high strength, a high void ratio, light weight, and high thermal insulation capability. The presented techniques have the potential to extend the short construction season in cold regions and will provide fill material, decreasing the need for excavation. Both techniques are well documented under laboratory conditions, the research results have been published, and the techniques are ready for field trials to assess implementability.     

考虑桩间土体抗滑作用的单排抗滑桩受力计算方法

为了充分考虑桩间距范围内滑体对抗滑桩受力的影响,从单排抗滑桩加固边坡的整体稳定角度出发,在采用传递系数法分析指定设计安全系数情况下抗滑桩的内力时,提出对一个桩间距范围内的加固坡体进行整体分析,将抗滑桩所在部位单独划分条块,该条块包括桩体受荷段及其两侧桩间距范围内的滑体。推导了与此分析模型相应的桩体受荷段底端内力计算公式,并给出了在滑坡推力线性分布条件下作用于受荷段的净滑坡推力计算表达式。分析结果显示,在不考虑与完全考虑受荷段两侧桩间距范围内滑体抗力作用时,得到是桩体内力及位移的上、下边界值。实例分析进一步表明,理论分析与数值模拟结果具有良好的一致性。所提出的方法比传统方法更有利于抗滑桩设计的经济性。     

瑶岭钨矿区寒武纪地层特征对寻找石英脉型黑 钨矿的指示意义

瑶岭钨矿由北矿区、东矿区和白基寨矿区3个矿区组成,其中北矿区是主要生产矿区,以石英脉型黑钨矿为主.在对北矿区大比例尺填图过程中,我们发现矿区地表地层单一,主要为寒武纪沉积的变质砂岩和板岩.针时这种情况,我们采用土壤地球化学测量、物探磁法测量、钻探等工程方法对寒武纪地层进行研究,综合分析了矿区地质特征、地球物理磁法特征及地球化学特征在对矿脉水平分布、矿脉垂直分布、蚀变矿物因素、构造因素、热接触因素和成矿因素的外在表现,从而建立起矿区寒武纪地层对矿化的指示体系表,并指出瑶岭钨矿北区深部和东南部有很大的找矿潜力,是值得继续找矿的有利目标地段.     

浙江省东部土壤元素地球化学特征及意义

为了研究土壤和稻米元素地球化学分布特征及影响稻米中重金属质量分数的主要因素,对浙江省东部农田根系土-稻谷样品进行了采集和分析。结果表明：各研究区均有重金属元素质量分数高于区域地球化学背景值,尤其是温州南郊地区的Hg、台州泽国地区Cd、绍兴北郊地区的Hg,其质量分数分别是背景值的6倍、5倍及9倍;7个研究区中,只有嘉兴新胜地区的As质量分数超过背景值。其原因是这些地区工业化进程迅速,人为活动频繁,污染较严重。绍兴北郊、嘉兴新丰、嘉兴新胜和桐乡崇福地区稻米中As、Cd、Cr、Hg、Se和Pb质量分数均未超过标准限值。稻米对重金属元素的吸收富集主要受土壤有机质、pH、土壤阳离子交换量和黏粒组成等土壤理化性质的影响：土壤有机碳越丰富越有利于稻米对As、Cd、Cr和Ni的吸收;稻米对As、Cd、Mn和Ni的富集系数随着pH上升而下降;土壤阳离子交换量和黏粒组成与水稻As、Cu、Hg、Mn、Pb、Se和Zn的富集系数呈显著负相关。     

Advective heat transfer and fabric development in a shallow crustal intrusive granite — the case of Proterozoic Vellaturu granite,south India

Syntectonic plutons emplaced in shallow crust often contain intermediate-to low-temperature deformation microstructures but lack a high-temperature, subsolidus deformation fabric, although the relict magmatic fabric is preserved. The Proterozoic Vellaturu granite emplaced at the eastern margin of the northern Nallamalai fold belt, south India during the late phase of regional deformation has a common occurrence of intermediate-to low-temperature deformation fabric, superimposed over magmatic fabric with an internally complex pattern. But high-T subsolidus deformation microstructure and fabric are absent in this pluton. The main crystal plastic deformation and fluid enhanced reaction softening was concentrated along the margin of the granite body. Resulting granite mylonites show Y-maximum c-axis fabric in completely recrystallized quartz ribbonds, dynamic recrystallization of perthites, and myrmekite indicative of fabric development under intermediate temperature (∼ 500–400°C). The weakly-deformed interior shows myrmekite, feldspar microfracturing and limited bulging recrystallization of quartz. The abundance of prism subgrain boundaries is indicative of continuing deformation through low-temperature (∼ 300°C). The relative rates of cooling influenced by advective heat transfer and deformation of the pluton seem to control the overall subsolidus fabric development. The rapid advective heat transfer from the interior in the early stages of subsolidus cooling was followed by slow cooling through intermediate temperature window as a well-developed phyllosilicate rich mylonitic skin around the granite body slowed down conductive heat loss. Low-T crystal plastic deformation of quartz was effected at a late stage of cooling and deformation of the shallow crustal granite body emplaced within the greenschist facies Nallamlai rocks.     

天津地区覆盖层土动力学参数统计分析

收集天津地区近年来有代表性的具有完整土动力学参数作为实验数据的地震安全性评价报告66份,用两种统计方法按不同深度统计分析粉质黏土、黏土、粉土、砂土、淤泥质土等的实测土动力学参数,给出动剪切模量比和阻尼比平均值。选取2个典型工程场地,构建土层分析模型,进行土层地震反应分析计算。结果表明,本文得到的统计2值在天津地区具有一定的代表性和适用性,与实测值结果更为接近。对于获得原状土样困难的场地,特别是对于较薄的夹层土,可参照统计2结果进行分析计算。