鄂尔多斯盆地白垩系主要含水岩组沉积岩相古地理对地下水水化学场形成和水质分布的影响

通过典型水文钻孔和露头剖面沉积地质、水文地质调查、样品测试及综合研究表明,鄂尔多斯盆地白垩系含水层形成时,北部环河组、洛河组均广泛发育河流相沉积,而南部环河组湖泊相为主、洛河组沙漠沙丘相广泛分布的沉积古地理格局,这对含水岩石中长石、粘土矿物、方解石、石膏等重要矿物组成和易溶盐含量及其空间分布形成明显控制,也控制了含水层和隔水层空间分布,并显著影响了深层地下水循环交替条件的区域分布变化。在沉积-成岩环境条件下,影响地下水水化学场形成和水质分布变化的主要水-岩作用包括硫酸盐、碳酸盐及硅酸盐矿物的溶解溶滤和阳离子交换作用等水文地球化学作用。受含水层沉积岩相古地理、地下水循环及水岩作用等因素控制,环河组、洛河组地下水总体表现为盆地北区TDS低、淡水发育、以HCO3型为主,南区TDS高、微咸水和咸水发育、以HCO3.SO4型为主的分布规律,地下水水化学和水质分布在北区分布变化小、在南区上下含水层分布变化复杂。     

ENVIRONMENTAL RESPONSE OF THE PERMIAN VOLCANISM IN LUCAOGOU FORMATION IN JIMSAR SAG,JUNGGAR BASIN,NORTHWEST CHINA

The lithological features, the types of organic matter and its occurrence and carbon and oxygen isotopic value were clarified by combining core observation, thin slice authentication, X ray diffraction analysis, kerogen type identification and carbon and oxygen isotope analysis. The characteristic of strata, the distribution of volcanoes of Junggar Basin were also taken into consideration. A comprehensive analysis was conducted to evaluate environmental response of volcanism in Lucaogou formation in Jimsar sag. The results show that rocks is a mixed sedimentation of effusive rock and carbonate rocks, volcanic materials is widely developed in Lucaogou formation and origins from the edge of sag or distant source volcano activity. Organic matter is predominantly unstructural algae and asphaltene. The carbon isotopic value of carbonates ranges between 6.8‰ and 9.7‰ with an average of 8.3‰, featured in high positive excursions, while oxygen isotopic value varies from -11.9‰ to -4.3‰ with an average of -6.2‰. During the period of volcanic activity, the volcanic material released high amounts of nutrient to the lake basin, which is beneficial to the algae and other organic organisms. In the poor oxygen and calm water environments, the organic matter is distributed in the laminar algal and the carbon isotope value is high positive drift. During the intermittent period of volcanic activity, the lake level decreased and the lake bottom water changed to the oxygen-enriched environments. The organic matter is locally enriched or dispersed in local layers, and the carbon isotope values decreased slightly. The frequent volcanic activity promoted the organism boom, which lead carbon isotope value to have high positive characteristics and change trends.     

Timing and development of sedimentation of the Cleaverville Formation and a post‐accretion pull‐apart system in the Cleaverville area,coastal Pilbara Terrane,Pilbara, Western Australia

In the Cleaverville area of Western Australia, the Regal, Dixon Island, and Cleaverville Formations preserve a Mesoarchean lower‐greenschist‐facies volcano‐sedimentary succession in the coastal Pilbara Terrane. These formations are distributed in a rhomboidal‐shaped area and are unconformably overlain by two narrowly distributed shallow‐marine sedimentary sequences: the Sixty‐Six Hill and Forty‐Four Hill Members of the Lizard Hills Formation. The former member is preserved within the core of the Cleaverville Syncline and the latter formed along the northeast‐trending Eighty‐Seven Fault. Based on the metamorphic grade and structures, two deformation events are recognized: D₁ resulted in folding caused by a collisional event, and D₂ resulted in regional sinistral strike‐slip deformation. A previous study reported that the Cleaverville Formation was deposited at 3020 Ma, after the Prinsep Orogeny (3070–3050 Ma). Our SHRIMP U–Pb zircon ages show that: (i) graded volcaniclastic–felsic tuff within the black shale sequence below the banded iron formation in the Cleaverville Formation yields an age of (3 114 ±14) Ma; (ii) the youngest zircons in sandstones of the Sixty‐Six Hill Member, which unconformably overlies pillow basalt of the Regal Formation, yield ages of 3090–3060 Ma; and (iii) zircons in sandstones of the Forty‐Four Hill Member show two age peaks at 3270 Ma and 3020 Ma. In this way, the Cleaverville Formation was deposited at 3114–3060 Ma and was deformed at 3070–3050 Ma (D₁). Depositional age of the Cleaverville Formation is at least 40–90 Myr older than that proposed in previous studies and pre‐dates the Prinsep Orogeny (3070–3050 Ma). After 3020 Ma, D₂ resulted in the formation of a regional strike‐slip pull‐apart basin in the Cleaverville area. The lower‐greenschist‐facies volcano‐sedimentary rocks are distributed only within this basin structure. This strike‐slip deformation was synchronous with crustal‐scale sinistral shear deformation (3000–2930 Ma) in the Pilbara region.     

Seismic responses of postyield hardening single–degree-of-freedom systems incorporating high-strength elastic material

It is widely accepted that ductility design improves the seismic capacity of structures worldwide. Nevertheless, inelastic deformation allows serious damage to occur in structures. Previous studies have shown that a certain level of postyield stiffness may reduce both the peak displacement and residual deformation of a structure. In recent years, several high-strength elastic materials, such as fiber-reinforced polymer (FRP) and high-strength steel bars, have been developed. Application of these materials can easily provide a structure with a much higher and more stable postyield stiffness. Many materials, members, and structures that incorporate both high-strength elastic materials and conventional materials show significant postyield hardening (PYH) behaviors. The significant postyield stiffness of PYH structures can help effectively reduce both peak and residual deformations, providing a choice when designing resilient structures. However, the findings of previous studies of structures with elastic-perfectly plastic (EPP) behavior or small postyield stiffness may not be accurate for PYH structures. The postyield stiffness of a structure must be considered an important primary structural parameter, in addition to initial stiffness, yielding strength, and ductility. In this paper, extensive time history and statistical analyses are carried out for PYH single–degree-of-freedom (SDOF) systems. The mean values and coefficients of variation of the peak displacement and residual deformation are obtained and discussed. A new R-μ_p-T-α relationship and damage index for PYH structures are proposed. A theoretical model for the calculation of residual deformation is also established. These models provide a basis for developing the appropriate seismic design and performance evaluation procedures for PYH structures.     

Development of detachable replaceable links for eccentrically braced frames

Eccentrically braced frames (EBFs) can be repaired after a major earthquake by replacing the links. The link replacement is not a straightforward process and is influenced by the type of the link and the amount of residual frame deformations. The past decade has witnessed the development of different types of replaceable links such as end-plated links, web connected links, bolted flange and web spliced links, and collector beam and brace spliced links. All of the developed replaceable link details, except the web connected links, are not suitable for link replacement under residual frame drift. In this paper, a detachable replaceable link detail which is based on splicing the link at its mid-length is proposed. The detail is well suited for installation under residual frame drifts. In addition, the weight and size of the members to be transported and erected are reduced significantly, thereby facilitating the replacement procedure. Performance of this proposed replaceable link is studied by conducting six nearly full scale EBF tests under quasi-static cyclic loading. The link length ratio, type of end-plated mid-splice connection, and the amount of residual drift are considered as test variables. The test results revealed that the inelastic rotation capacity of the detachable replaceable links exceeds the requirements of the AISC Seismic Provisions for Structural Steel Buildings. No failures are observed in the end-plated mid-splice connections demonstrating the potential of the proposed details. The detachable replaceable links are investigated by numerical analysis as well to further validate their applicability and to develop design recommendations.     

强震作用下抗震陷黄土改良地基的微观特征分析

基于动三轴试验和SEM细观结构测试试验,结合图像分析处理软件,对强震荷载前后宝兰客运专线沿线典型震陷性黄土及其经物理、化学和复合改良方法处理后的试样进行微观尺度的结构变形演化规律研究,探讨不同改良方法对土体微结构的影响及其与震陷系数之间的内在联系。结果表明:(1)物理改良方法对于消除大孔隙和架空孔隙结构的效果最为明显,同时对颗粒级配和结构也有调整;(2)化学改性方法则从颗粒接触方式、粒间胶结程度等方面影响土体强度,且不同化学反应的参与可生成独特的玻璃微珠或絮凝状细结构,从而大大提升土体某项参数指标,进而在强震中分别起到填充、胶结或缓冲作用;(3)强震作用前后不同改良方法对各微观要素的改变与相应的残余应变现象吻合较好,说明微结构能有效反映改良黄土残余变形的强弱。     

乌兰浩特地震台与阿尔山火山地震观测站面波震级偏差分析

为了提高乌兰浩特地震台、阿尔山火山地震观测站的震级精度,基于面波震级公式和残差统计方法,分别计算乌兰浩特台、阿尔山火山地震观测站与中国地震台网中心测定的面波震级之间的偏差,分析产生震级偏差的影响因素。结果表明：乌兰浩特台、阿尔山火山地震观测站测定的面波震级与中国地震台网发布震级的偏差平均值分别为0.19、0.17;震级偏差总体呈现随震级的增加而先增大后减少的趋势;阿尔山火山地震观测站震级偏差随震中距的增大而增大,而乌兰浩特台则先增大后减少。     

山西地区远震P波到时残差分布

收集2008—2016年山西地震台网记录的震中距30°—90°范围内1 253个远震事件波形,拾取7 600余条高质量P波初至到时,使用IASP91模型计算相对到时残差,分析残差水平分布特征,结果显示:①以山西地区中部的山西断裂带为界,西部地震台站记录的P波初至主要表现为早到时,东部位于大同火山区的地震台站记录则主要表现为晚到时;②位于山西断裂带内部的地震台站记录的P波初至主要表现为早到时,残差水平显著低于西部地震台站;③研究区P波到时整体呈现自西向东逐渐由早到晚的分布特征。推测山西断裂带西部地区下方可能存在高速异常结构,山西断裂带内部及大同火山区下方可能存在低速异常结构。     

培养液更换对萼花臂尾轮虫(Brachionus calyciflorus)休眠卵形成的影响

在种群累积培养状态下研究了培养液更换对萼花臂尾轮虫（ Ｂｒａｃｈｉｏｎｕｓ ｃａｌｙｃｉｆｌｏｒｕｓ）休眠卵形成的影响,结果表明,在培养液不予更换的情况下,萼花臂尾轮虫休眠卵的产量和形成效率分别为 ７２４ ３３３３± ４０． ５２５７ｉｎｄ（６ｄ．２０ｍＬ）－１和 ６ ．０３６１± ０． ３３７７ｉｎｄ（５ × １０６ ｃｅｌｌｓ）－１（ａｌ－ｇａｅ ｄｉｅｔ）与之相比,当培养液每 ２天更换一次时,其休眠卵的产量和形成效率分别下降至６３７．３３３３±１６． ８０２８ｉｎｄ．（６ｄ·２０ｍＬ）－１和５ ．３１１１±０ ．１４００ｉｎｄ（５×１０６ｃｅｌｌｓ）－１（ａｌｇａｅ　ｄｉｅｔ）．随着培养液更换频率增大至每天一次时,其休眠卵的产量和形成效率下降的幅度进一步增大培养液更换对轮虫种群中的混交雌体百分率和混交雌体受精率无显著的影响,最后探讨了培养液更换对萼花臂尾轮虫休眠卵形成影响的机理．     

Morphometry and distribution of isolated caves as a guide for phreatic and confined paleohydrological conditions

Isolated caves are a special cave type common in most karst terrains, formed by prolonged slow water flow where aggressivity is locally boosted. The morphometry and distribution of isolated caves are used here to reconstruct the paleohydrology of a karstic mountain range. Within a homogenous karstic rock sequence, two main types of isolated caves are distinguished, and each is associated with a special hydrogeologic setting: maze caves form by rising water in the confined zone of the aquifer, under the Mt. Scopus Group (Israel) confinement, while chamber caves are formed in phreatic conditions, apparently by lateral flow mixing with a vadose input from above.