对中国大陆区域地磁场提取的认识

本文从球谐函数理论的物理含义、中国地磁数据的分布情况及实际计算结果的分析,提出对当前用球谐函数拟合法提取中国大陆区域地磁异常的几点认识。     

强风化软硬互层岩质高边坡监测与数值模拟

强风化软硬互层岩质高边坡属岩质边坡特殊情况,其结构面组成及性质复杂,与支护结构相互作用的复杂程度较高,相互影响较大,顺倾结构面临空等情况下破坏可能性很大。以兰永一级公路某深挖路堑边坡的治理工程为依托,对边坡支护过程中及支护结束后的锚杆应力、锚索内力、坡体位移进行了原位监测,并利用岩土分析软件PLAXIS,采用节理岩模块对该边坡工程进行了数值模拟分析。监测及模拟结果表明：该边坡由节理裂隙与岩层面形成折线形潜在滑面,且具有相同滑动可能性的潜在滑面不止一个;支护结构穿透组成滑面折线的任何折线段部分均对结构面稳定有显著影响,但支护结构穿透泥岩面对结构面的影响较穿透节理裂隙更大;支护锚索预应力变化具有一定规律,预应力变化过程对坡体位移及支护结构内力具有一定影响;坡体的主动变形对支护结构内力的影响较坡体被动变形大,结构面产生滑动趋势对坡面位移影响的敏感程度较支护结构内力影响的敏感程度低。该边坡支护稳定,支护设计合理,可为同类边坡支护设计提供相应建议。     

利用蒙特卡罗方法的剩余静校正及其应用

针对剩余静校正问题,讨论了统计方法中的蒙特卡罗法用于反射波能量最大化剩余静校正的方法。分别论述了反射波叠加能量最大化法和蒙特卡罗方法,以及蒙特卡罗方法如何应用于剩余静校正的计算中,并用实例说明了该方法的效果。通过实际应用蒙特卡罗剩余静校正方法,解决了经野外静校正后残留的剩余静校正问题,并通过与其他剩余静校正方法的实际应用对比,说明了蒙特卡罗剩余静校正方法的优势。对于大剩余量的静校正问题,蒙特卡罗剩余静校正方法仍然可以很好的解决,并且不会产生串相位问题,说明蒙特卡罗剩余静校正方法是可靠的。     

安塞油田谭家营油区长2油藏剩余油分布规律及潜力研究

以油藏数值模拟方法为主,同时结合综合地质分析方法对安塞油田谭家营油区长2油藏分小层进行了河流相低渗透储层剩余油成因类型、分布规律及剩余油潜力研究。认为井网未控制型剩余油、注采不完善型剩余油、厚油层顶部滞留型剩余油、层间干扰型剩余油是主要的剩余油成因类型;长21-2储量动用程度高,但剩余储量的绝对数较大,仍然是开发的主力层位,长21-3动用程度很低,但由于存在底水,底水锥进严重,需加强动用程度及开发控制。     

钉土相互作用的剪滞力理论分析

在深基坝支护设计中 ,对钉土作用机理存在着许多模糊认识。为此 ,本文在一定假设条件下 ,建立了钉土相互作用的剪滞力模型 ;结合实例分析对模型进行了验证 ,并对钉土相互作用机理进行了分析.     

不同滑坡推力模式下圆截面嵌岩抗滑桩受力特性研究

为分析嵌岩抗滑桩在不同分布模式推力下的变形与内力情况,将基于研究桩-土可分离模型的CPSP解析程序运用于嵌岩圆截面抗滑桩的嵌固段计算,可以计算得到不同推力模式下抗滑桩嵌固段的变形与内力结果。本文将ABAQUS软件的数值模拟结果与CPSP程序的解析计算结果进行了对比,论证了CPSP程序嵌岩圆截面抗滑桩嵌固段计算的适用性。通过改变计算参数,运用CPSP程序计算了嵌岩抗滑桩在均质地基不同分布模式滑坡推力下的桩身位移、剪力、弯矩的分布结果,并总结出最大桩身位移、剪力、弯矩的相关规律。此外,在基于CPSP程序的计算结果上,并且考虑抗滑桩满足滑面处连续条件的情况下,经过解析计算,计算得到不同滑坡推力模式下抗滑桩受荷段的挠度公式,计算得出并对比了不同滑坡推力分布模式下抗滑桩的变形受力结果,分析了滑坡推力分布模式对抗滑桩桩身的变形与内力的影响。     

Wave interaction with a submarine pipeline in clayey soil due to random waves

The wave pressure and uplift force due to random waves on a submarine pipeline (resting on bed, partially buried and fully buried) in clayey soil are measured. The influence of various parameters viz., wave period, wave height, water depth, burial depth and consistency index of the soil on wave pressures around and uplift force on the submarine pipeline was investigated. The wave pressures were measured at three locations around the submarine pipeline (each at 120° to the adjacent one). It is found that the wave pressure and uplift force spectrum at high consistency index of the soil is smaller compared to that of low consistency index. Just burying the pipeline (e/D=1.0) in clayey soil reduces the uplift force to less than 60% of the force experienced by a pipeline resting on the seabed (e/D=0.0) for I_c=0.33.     

The role of Coriolis in sandbank formation due to a headland/island system

Tidal flow past a headland was modelled and the resulting sandbank formation due to bedload transport by eddy systems was examined with particular emphasis on the role of Coriolis. The headland configuration was extended to the more complex case of a headland with a detached island and the role of Coriolis in sandbank formation was again examined. In the headland case, the contribution of Coriolis resulted in the expected change in bed level at the centre of the residual eddies (positive contribution for the cyclonic eddy and negative change for the anticyclonic eddy). In the headland/island case, the role of Coriolis in the resulting bed level change was a function of eddy shedding from the island, defined by the island wake parameter. When eddy shedding occurred, the inclusion of Coriolis had a large magnitude effect on creating flood/ebb sandbank asymmetry. When eddies remained attached to the island, Coriolis had a minor role in the magnitude of this asymmetry.     

Numerical prediction of MODUs drift during Hurricane Katrina

Severe hurricanes, such as Katrina, broke the mooring lines of a number of mobile offshore drilling units (MODU) deployed in the Gulf of Mexico and some of those MODUs went adrift. A drifting MODU may damage other critical elements of the offshore oil and gas infrastructure by colliding with floating or fixed production systems and transportation hubs, or by rupturing pipelines owing to their dragging anchors over the seabed. To avoid or mitigate the damage caused by a drifting MODU, it is desirable to understand the mechanics of the drift of a MODU under the impact of severe wind, wave and current and have the capability of predicting the trajectory of the drift. To explore the feasibility and accuracy of predicting the trajectory of a drifting MODU based on hindcast met-ocean conditions and limited knowledge of the condition of the drifting MODU, this study employed a simplified equation describing only the horizontal (surge, sway and yaw) motions of a MODU under the impact of steady wind, current and wave forces. The simplified hydrodynamic model neglects the first- and second-order oscillatory wave forces, unsteady wind forces (owing to wind gustiness), wave drift damping, and the effects of the body oscillation on the steady wind and current forces. It was assumed that the net effects of the oscillatory forces on the steady motion are insignificant. To verify the accuracy and feasibility of our simplified approach, the predicted drifting trajectories of two MODUs were compared with the corresponding measurements recorded by the global positioning system (GPS).     

Numerical Simulation of Large Diameter Cylindrical Structure Slamming

The water entry of large diameter cylindrical structure is studied by applying numerical simulation method. The processes of different diameter cyhndrical structures impacting water with various constant velocities are calculated numerically. Thereafter, analyzed are the distribution of slamming pressure on structure during slamming course and the influence of slamming velocity and cylindrical diameter on slamming process. Furthermore, presented herein is an equation being used to forecast the peak slamming force on a large diameter cylindrical structure.