Nonlinear optimization method of ship floating condition calculation in wave based on vector

Ship floating condition in regular waves is calculated. New equations controlling any ship＇s floating condition are proposed by use of the vector operation. This form is a nonlinear optimization problem which can be solved using the penalty function method with constant coefficients. And the solving process is accelerated by dichotomy. During the solving process, the ship＇s displacement and buoyant centre have been calculated by the integration of the ship surface according to the waterline. The ship surface is described using an accumulative chord length theory in order to determine the displacement, the buoyancy center and the waterline. The draught forming the waterline at each station can be found out by calculating the intersection of the ship surface and the wave surface. The results of an example indicate that this method is exact and efficient. It can calculate the ship floating condition in regular waves as well as simplify the calculation and improve the computational efficiency and the precision of results.     

渤海地区平台结构设计环境条件选取分析

随着平台的使用年限增长,环境条件随着海洋环境的变化而变得日益恶劣,对于渤海地区,提出了是否采用100年一遇环境条件替换50年一遇环境条件进行结构设计.经过对渤海地区的部分中心平台和井口平台50年/100年环境条件对比分析,提出了对于渤海地区海上平台结构采用100年一遇环境条件替换50年一遇环境条件.     

极地产适冷脂肪酶菌株的酶学性质研究

从南北极环境样品中分离到7株产脂肪酶的细菌,经16SrDNA序列分析表明,这些细菌分别属于假交替单胞菌属（Pseudoalteromonas）和嗜冷杆菌属（Psychrobacter）．采用p-NPP法对这7株细菌所产的脂肪酶进行酶学性质研究,结果显示这些酶的最适作用温度在30～40cC、最适作用pH值在7—8之间,在低温下能保持较高的剩余活力,对热敏感,属于适冷脂肪酶．其中假交替单胞菌（Psychrobacter sp．7342）所产脂肪酶具有低温下酶的剩余活力高、有效作用温度和pH范围广、热稳定性较好及对多种金属离子抗性强等特点．该菌株能利用多种单一氮源和碳源产酶,最适产酶温度为25℃．在此基础上进行正交实验分析得到了该菌株的最佳发酵条件为：蛋白胨和淀粉含量各为1．33％,酵母膏含量为0．3％,温度为25℃．     

中国龙虾生长特点及促生长途径的探讨

蜕壳后新甲壳完全硬化之前是中国龙虾(Panulirus stimpsoni)个体蜕壳生长过程的延续,对中国龙虾正常快速生长具有重要意义。环境因子、营养条件对中国龙虾的蜕壳与生长具有显著影响。24-27℃是中国龙虾蜕壳生长的适温范围;盐度24-32适宜中国龙虾生长,最适生长盐度是28;在6种试验饵料中翡翠贻贝饲养中国龙虾效果最好,其次是杂虾、杂蟹、牡蛎,投喂杂鱼的中国龙虾蜕壳增长率和阶段生长率都很低;龙虾饲料中添加蜕壳素能够縮短蜕壳周期,实现蜕壳率和蜕壳增长率的同步增长。摘除眼柄也能促进中国龙虾的蜕壳与生长,电刺激等外源刺激则只能促进蜕壳,而不能加速中国龙虾的生长,甚至可能产生负面影响。中国龙虾生长存在种内性别间的差异,同等条件下雄性个体的蜕壳增长率高于雌性个体。     

Factors involved in growth plasticity of cockles Cerastoderma edule (L.), identified by field survey and transplant experiments

In Arcachon Bay, a macrotidal coastal lagoon in southwest France, growth rates of cockles Cerastoderma edule (L.) differ greatly between locations. Sampling of populations at different tidal levels showed that the mean shell length was significantly and positively correlated with immersion time, whereas no correlation was found with population density and microphytobenthos biomass. Transplants of cockles between two intertidal sites were used to examine the relative importance of habitat and site of origin for growth rate and condition index. Artifacts due to manipulation were assessed, i.e. the impact of enclosures on growth, conditon index and mortality. During a 5-mo reciprocal transplant experiment, growth rates of the transplanted cockles and the cockles already present were similar, whereas the sites of origin did not affect growth rate. Condition index, however, displayed significant differences in relation to both transplant and origin sites. During a further 6-mo experiment in which cockles were transplanted from one site to four new sites, growth was mainly influenced by tidal level. These results indicate that net growth started when cockles were immersed 30% of the time. It is concluded that, on the scale of Arcachon Bay (156 km²), differences in growth and condition between cockle populations are largely phenotypic. Tidal level (i.e. food supply and emersion stress) accounts for most of these differences, but the existence of genetically or physiologically different populations cannot be excluded.     

Study on Current-Random Wave Forces Acting on a Framework

—The forces of random wave plus current acting on a simplified offshore platform(jacket)mod-el have been studied numerically and experimentally.The numerical results are in good agreement withexperiments.The mean force can be approximated as a function of equivalent velocity parameter and theroot-mean-square force as a function of equivalent significant wave height parameter.     

一次强雨凇造成的供电中断事故天气分析

作者介绍了１９９４年１１月１５日，由邹县电厂至淄博５００ｋＶ超高压输电线路＃４４８ＺＭ塔倒塔事故的情况。并对造成这次倒塔事故的天气条件进行了分析     

Critical conditions for natural gas charging and delineation of effective gas source rocks for tight sandstone reservoirs

Although it has been shown that the potential of tight‐sand gas resources is large, the research into the mechanisms of hydrocarbon charging of tight sandstone reservoirs has been relatively sparse. Researchers have found that there is a force balance during hydrocarbon charging, but discriminant models still have not been established. Based on the force balance conditions observed during gas migration from source rocks to tight sandstone reservoirs, a calculation formula was established. A formula for identifying effective source rocks was developed with the gas expulsion intensity as the discrimination parameter. The critical gas expulsion intensity under conditions of various burial depths, temperatures, and pressures can be obtained using the calculation formula. This method was applied in the Jurassic tight sandstone reservoirs of the eastern Kuqa Depression, Tarim Basin, and it was calculated that the critical expulsion intensity range from 6.05 × 10⁸ m³/km² to 10.07 × 10⁸ m³/km². The critical gas charging force first increases with depth and later decreases with greater depths. The distribution range of effective gas source rocks and total expelled gas volume can be determined based on this threshold. This method provides new insight into and method for predicting favourable tight‐sand gas‐bearing regions and estimating their resource potentials. Copyright © 2014 John Wiley & Sons, Ltd.     

狭缝系统与伊利石结晶度Kuebler指数的测定及相关问题讨论

根据实验结果,衍射峰半高宽随接收狭缝增大而呈二次工线线性增大。扫描速度与扫描步长的确定应遵守Ｗａｎｇ（１９９４）提出的关系式,并确定在相对误差小于〈５％的范围内。固定样品条件,选定最优实验条件下使用国际标样标定系统偏差是伊利石结晶测量中必不可少的重要步骤。不固定样品条件和实验条件,同一样品的伊利石工值将因条件的变化而不同;固定样品和实验条件而不使用国际标样标定系统偏差,则无法与他人数据进行对比,其     

不排水不可压缩条件下两相介质的两重网格算法

对于不排水、不可压缩饱和软土地基的固结问题的有限元分析,可以用Biot固结方程来考虑土体颗粒与孔隙水间的相互作用。由于受Babuska-Brezzi稳定条件的限制,用常规的等插值u-p混合有限元法求解将导致孔隙压力出现紊乱的结果。提出了基于位移和压力线性等插值函数的两重网格,但位移独立变量总数大于独立压力变量总数的计算方法,可以满足Babuska-Brezzi稳定条件,使得位移场和压力场单元插值阶数保持一致。通过几个简单算例验证了提出方法的正确性。