Early diagenesis of nurtrients （C, N, P and Si） stored in sediments of two reservoirs in southwestern China

Damming is a common anthropogenic intervention along the course of rivers, which is defined as ＂artificial-lake effect＂, both in China and across the world. Today as many as 48000 dams and/or reservoirs are in operation in the Changjiang River （Yangtze River） drainage area, and more are being constructed. While damming is well known to affect riverbome nutrient loads, and thus the riverine ecosystems owing to removal of carbon fixation, and removal of particles in reservoir sediments, there is limited information on the detailed early diagenesis of sediments in reservoirs including the regeneration processes of nutrients deposited in sediments and exchange flux across the sediment-water interface, which is important for mass balance of riverbome nutrients. In the present study, two large-size reservoirs, Wujiangdu Reservoir （WJDR） and Dongfeng Reservoir （DFR）, located on the main steam of the Wujiang River and with uniformity hydrography and discrepancy biogeochemical activity （e. g. primary production）, were selected for a comparative study on the detailed processes of nutrient regeneration. Water, pore water and sediment were sampled from these two reservoirs and dissolved organic carbon （DOC）, NH4^＋, NO3^-, PO4^3-, dissolved silica （DSi） in the overlying water and pore water, and total organic matter in sediments were determined. The results of correlation analysis suggested that in these two reservoirs, processes of nutrient regeneration near the sediment-water interface were significantly different. As a result of rapid decomposition of algae-derived ＂labile＂ organic matter in upper sediments, nutrient regeneration processes and upward fluxes in WJDR are dramatically stronger than those of DFR. NH4^＋ upward flux from sediment in WJDR was about 17 times higher than that in DFR. PO4^3- flux in WJDR is about 13 times above that in DFR. DOC flux in WJDR is larger that in DFR by 5 times, and DSi by 1 time.     

Reservoir description using dynamic parameterisation selection with a combined stochastic and gradient search

There is a correspondence between flow in a reservoir and large scale permeability trends. This correspondence can be derived by constraining reservoir models using observed production data. One of the challenges in deriving the permeability distribution of a field using production data involves determination of the scale of resolution of the permeability. The Adaptive Multiscale Estimation (AME) seeks to overcome the problems related to choosing the resolution of the permeability field by a dynamic parameterisation selection. The standard AME uses a gradient algorithm in solving several optimisation problems with increasing permeability resolution. This paper presents a hybrid algorithm which combines a gradient search and a stochastic algorithm to improve the robustness of the dynamic parameterisation selection. At low dimension, we use the stochastic algorithm to generate several optimised models. We use information from all these produced models to find new optimal refinements, and start out new optimisations with several unequally suggested parameterisations. At higher dimensions we change to a gradient-type optimiser, where the initial solution is chosen from the ensemble of models suggested by the stochastic algorithm. The selection is based on a predefined criterion. We demonstrate the robustness of the hybrid algorithm on sample synthetic cases, which most of them were considered insolvable using the standard AME algorithm.     

Engineering geological studies and tunnel support design at Sulakyurt dam site, Turkey

This paper presents the results of engineering geological investigations and tunnel support design studies, carried out at the Sulakyurt dam site, northeast of Ankara, Turkey. The Sulakyurt dam will be used for flow control and water storage for irrigation projects. Studies were carried out both in the field and the laboratory. Field studies include engineering geological mapping, intensive discontinuity surveying, core drilling and sampling for laboratory testing. The diversion tunnel will be driven in rock mass, consisting of granite and diorite. Empirical, analytical and numerical methods were combined for safe tunnel design. Rock mass rating (RMR), Rock mass quality (Q) and Geological strength index (GSI) systems were used for empirical rock mass quality determination, site characterization and support design. The convergence–confinement method was used as analytical method and software called Phase², a 2D finite element program, was utilized as numerical method. According to the results acquired from the empirical, analytical and numerical methods, tunnel stability problems were expected in both granite and diorite rock masses. The support system, suggested by empirical methods, was applied and the performance of suggested support system was evaluated by means of numerical modelling. It was concluded that the suggested support systems were adequate, since after applying the suggested support system to granite and diorite, tunnel deformation and the yielded elements around the tunnel decreased significantly. Thus, it is suggested that for more reliable support design empirical, numerical and analytical methods should be combined.     

自重湿陷性黄土地区桩基设计探讨

根据自重湿陷性黄土的特点、《湿陷性黄土地区建筑规范》（GB50025—2004）和《建筑桩基技术规范》（JGJ94—94）中关于桩基设计的对比分析，通过自重湿陷性黄土场地工程实例分析计算，依据负摩擦产生的机理——中性点理论，论述了自重湿陷性黄土场地中桩基设计应考虑中性点，而不应全部计入负摩阻的观点。     

均匀设计在室内大型注浆试验研究中的应用

介绍了均匀设计试验方法的特点及优越性，利用试验点在试验范围内的均匀分布，能大大减少试验次数且获得较好的试验效果。将均匀设计方法引入到注浆试验研究中，并对试验进行了详细设计，实践表明，均匀设计试验法是一种有效、可靠的试验设计方法。     

Optimization of nonconventional wells under uncertainty using statistical proxies

The determination of the optimal type and placement of a nonconventional well in a heterogeneous reservoir represents a challenging optimization problem. This determination is significantly more complicated if uncertainty in the reservoir geology is included in the optimization. In this study, a genetic algorithm is applied to optimize the deployment of nonconventional wells. Geological uncertainty is accounted for by optimizing over multiple reservoir models (realizations) subject to a prescribed risk attitude. To reduce the excessive computational requirements of the base method, a new statistical proxy (which provides fast estimates of the objective function) based on cluster analysis is introduced into the optimization process. This proxy provides an estimate of the cumulative distribution function (CDF) of the scenario performance, which enables the quantification of proxy uncertainty. Knowledge of the proxy-based performance estimate in conjunction with the proxy CDF enables the systematic selection of the most appropriate scenarios for full simulation. Application of the overall method for the optimization of monobore and dual-lateral well placement demonstrates the performance of the hybrid optimization procedure. Specifically, it is shown that by simulating only 10% or 20% of the scenarios (as determined by application of the proxy), optimization results very close to those achieved by simulating all cases are obtained.     

Transparency: aid or obstacle to effective defence of vulnerable environments from reservoir construction? Dam decisions and democracy in North East England

Public participation in transparent decisionmaking has been proposed as a panacea for environmental protection. Bargaining theory suggests drawbacks to transparency such as hardening of attitudes and intransigence. Yet achievement of consensus on environmental values for integrated water resource management demands public involvement. Historical study of attempts to prevent reservoir construction in upland valleys designated for protection of nature suggests that 'closed-door' bargaining proved more effective for environmentalists than open, public debate. Records now open for analysis of disputes over Teesdale and Farndale, 1950–1970, allow comparisons to be made between behind-the-scenes deliberations and 'open-door' public discussion. The ambition of progressing from public participation to devolution of environmental decisionmaking and responsibility to the local scale demands more conceptualization of the process of decisionmaking on water resource development.     

Branding the design metropole: the case of Montréal, Canada

As part of a broader process of inter-urban competition, city governments have increasingly sought to 'position' themselves as centres of creativity. In these branding initiatives, culture is viewed as a tool of urban regeneration and economic development. Our paper examines the case of Commerce Design Montréal, an annual design competition run by the City of Montréal, which aims to brand Montréal as a centre of design. Commerce Design Montréal is an example of a 'fast' policy initiated by the state, but carried out by business owners and citizens. As such, it represents a downloading of the responsibility for economic development to the private or individual scale and adopts only a partial view of the varied actors and uses that are implicated in the design process. The paper considers the opportunities and challenges that this model presents for promoting design as a form of urban regeneration in a neo-liberal context.     

Semi-Analytic Modelling of Subsidence

This paper presents a forward model for subsidence prediction caused by extraction of hydrocarbons. The model uses combinations of analytic solutions to the visco-elastic equations, which approximate the boundary conditions. There are only a few unknown parameters to be estimated, and, consequently, calculations are very fast. The semi-analytic model is applicable to a uniform and layer-cake stratigraphy, with visco-elastic parameters changing per layer, and an arbitrary depletion pattern. By its capabilities to handle a multi-layered visco-elastic subsurface, the semi-analytic model fills the gap between the analytic single-layered elastic models available to date and the more elaborate numerical, e.g. finite element, models.     

图像数据挖掘软件原型系统的设计与开发

提出了图像数据挖掘软件原型系统的设计与开发的试验框架,阐述了其设计与开发方法,介绍了各个模块的功能、设计与开发情况。