采用弯曲进行道路化简冲突避免的方法

针对道路化简后可能导致要素间空间关系前后不一致的问题,提出了一种采用弯曲进行道路化简冲突避免的方法。首先,以弯曲为单元分析道路化简前后弯曲的形态变化规律,对化简过程产生的要素间空间冲突类型进行了归纳和总结;其次,基于道路弯曲与要素之间的空间关系,提出了相应的冲突判别规则;最后,利用弯曲化简的可控性和弯曲组的间接化简策略实现对化简冲突的避免。试验表明,该方法能有效地识别和避免道路化简产生的空间冲突,确保化简前后道路与其他要素空间关系的一致性。     

板桥-合水地区长63储层成岩相孔隙结构特征及优质储层分布

利用铸体薄片、扫描电镜、常规压汞、恒速压汞及相渗等资料,研究了板桥-合水地区长6₃储层成岩相类型及其微观孔隙结构特征,总结了不同成岩相的测井响应特征,确定了纵向及平面分布规律。结果表明优质成岩相的展布受沉积相、成岩作用与孔隙结构共同控制,尤其是喉道分布才是控制砂岩储层渗透性的主要因素。水云母胶结-残余粒间孔相和水云母胶结-长石溶蚀相储层主要分布于半深湖相重力流复合水道浊流沉积中,细-微细喉道发育,孔喉连通性好,渗流能力最好,油水呈相对均匀的渗流,孔隙内的油气极易通过喉道被开采出来;绿泥石胶结相、水云母胶结弱溶蚀相储层位于分支水道边缘,呈孤岛状分布,孔喉半径小但分布均匀,渗流能力中等-差;碳酸盐胶结相、碳酸盐+水云母胶结相储层主要发育在分支水道间,孔隙结构发育程度差,喉道细小且孔喉连通性差,富集于孔隙中的油气难以通过小喉道,采收率低。     

Using Geomechanical Method to Predict Tectonic Fractures in Low-Permeability Sandstone Reservoirs

Understanding and interpreting the timing, location, orientation, and intensity of natural fractures within a geological structure are commonly important to both exploration and production planning activities of low-porosity and low-permeability carbonate reservoirs. In this study, we explore the application of comprehensive geomechanical methods to quantitatively characterize the fracture parameters based on Strain Energy Density Theory, such as linear fracture density and volume fracture density. This study approach is based on the idea that energy generated by tectonic stress on brittle sandstone,which can be distinguished fracture surface energy, friction energy dissipation and residual strain energy and natural fractures can be interpreted or inferred from geomechanical-model-derived strains. For this analysis, we model an extension and compression compound fault block developed in a mechanically stratified sandstone and shale sequence because mechanics experimental data and drilling data exist that can be directly compared with model results.However, the results show that the approach and our study conclusion are independent of the specified structural geometry, which can correlate fracture parameters in different stages with different tectonic activities, and finally build and visualize fracture networks in sandstone. The presence or absence of filling minerals in fractures is shown to strongly control the destruction and transformation of low-permeability sandstone, and this control possesses crucial implications for interpreting fracture aperture and reservoir flow simulation.     

东营凹陷南坡沙三段坡移扇沉积特征

目前,东营凹陷南坡沙三段已钻遇到坡移扇这一新型的岩性油气藏类型,但是对坡移扇的地质认识较浅,且其识别特征尚不明确,从而制约了坡移扇勘探的进程。通过大量的岩芯精细观察和描述,统计分析了大量实验数据,在结合地震资料分析的基础上,系统总结坡移扇有别于浊积岩的沉积特征等识别标志。分析认为,坡移扇的形成受三角洲的规模和建设性、构造坡度或沉积坡度、构造运动及湖平面变化等因素所控制。     

滨里海盆地Z油田油藏类型与成藏因素研究

Z油田主要含油层系包括白垩系-中侏罗统低幅度背斜构造油藏、中三叠统盐檐断鼻油藏和上三叠统岩性圈闭油藏3种油藏类型。通过对紧密围绕盐有关的构造和有效盐窗这两个影响Z油田油气成藏的关键因素的研究认为成藏模式为"盐下生成、盐窗沟通、盐边盐间断层输导、高点聚集、后期保存"。Z油田油源充足,盐窗大而有效,多种有效的输导体系,圈闭类型多而好,埋深适中,储盖层发育且配置良好,侧向遮挡条件具备且后期保存条件良好,可作为今后勘探首选目标区。     

昭通示范区黄金坝气田五峰—龙马溪组页岩气储层地质特征

昭通国家级页岩气示范区黄金坝气田是继礁石坝和长宁—威远之后中国又一个在页岩气勘探、开发领域实现重大突破的地区,为了系统地展示黄金坝气田页岩气资源富集的储层条件,为未来的勘探工作提供参考,以五峰—龙马溪组页岩气储层为研究对象,从区域地质条件、储层岩石学、物性和地球化学4个方面对该页岩气储层进行了综合研究。结果表明稳定的区域构造和良好的顶底板条件是黄金坝地区页岩气资源富集的关键,良好的保存条件使储层维持了较高的压力(压力系数1);较高的孔隙度(平均4%)和TOC含量(目的层2%)提供了良好的储集空间,使储层具有较高的含气量(1.35~3.48 cm3/g,平均2.50 cm3/g);天然气地球化学数据表明,区内天然气主要成分为CH4(97%),其次还含有少量的C2H6、C3H8和CO2;天然气同位素数据表明烃类C同位素组成发生了倒转,表明储层具有良好的封闭性。但储层孔隙系统较为复杂,且非均质性极强,从而导致渗透率较低,在储层改造施工过程中应予以充分考虑。总体上,黄金坝气田具有较好的开发前景,生产测试表明,区内直井压裂产量为0.5×104~3.5×104m3/d/井,水平井压裂产量可达12×104~40×104m3/d/井。     

辐射井技术在尾矿库降排水工程中的应用

尾矿库是我国重大危险源之一,而尾矿库内的浸润线又是坝体安全的重要指标之一,为有效排出尾矿中的水,降低尾矿库内浸润线,本文通过辐射井技术在尾矿库降排水工程中应用的多个成功工程实例,归纳、总结并提出该技术在尾矿库应用过程中的设计思路、施工要点及工艺方法等。     

Diagenesis and origin of calcite cement in the Flemish Pass Basin sandstone reservoir (Upper Jurassic): Implications for porosity development

The Flemish Pass Basin is a deep-water basin located offshore on the continental passive margin of the Grand Banks, eastern Newfoundland, which is currently a hydrocarbon exploration target. The current study investigates the petrographic characteristics and origin of carbonate cements in the Ti-3 Member, a primary clastic reservoir interval of the Bodhrán Formation (Upper Jurassic) in the Flemish Pass Basin.The Ti-3 sandstones with average Q_86.0F_3.1R_10.9 contain various diagenetic minerals, including calcite, pyrite, quartz overgrowth, dolomite and siderite. Based on the volume of calcite cement, the investigated sandstones can be classified into (1) calcite-cemented intervals (>20% calcite), and (2) poorly calcite-cemented intervals (porous). Petrographic analysis shows that the dominant cement is intergranular poikilotopic (300–500 μm) calcite, which stared to form extensively at early diagenesis. The precipitation of calcite occured after feldspar leaching and was followed by corrosion of quartz grains. Intergranular calcite cement hosts all-liquid inclusions mainly in the crystal core, but rare primary two-phase (liquid and vapor) fluid inclusions in the rims ((with mean homogenization temperature (T_h) of 70.2 ± 4.9 °C and salinity estimates of 8.8 ± 1.2 eq. wt.% NaCl). The mean δ¹⁸O and δ¹³C isotopic compositions of the intergranular calcite are −8.3 ± 1.2‰, VPDB and −3.0 ± 1.3‰, VPDB, respectively; whereas, fracture-filling calcite has more depleted δ¹⁸O but similar δ¹³C values. The shale normalized rare earth element (REE_SN) patterns of calcite are generally parallel and exhibit slightly negative Ce anomalies and positive Eu anomalies. Fluid-inclusion gas ratios (CO₂/CH₄ and N₂/Ar) of calcite cement further confirms that diagenetic fluids originated from modified seawater. Combined evidence from petrographic, microthermometric and geochemical analyses suggest that (1) the intergranular calcite cement precipitated from diagenetic fluids of mixed marine and meteoric (riverine) waters in suboxic conditions; (2)the cement was sourced from the oxidation of organic matters and the dissolution of biogenic marine carbonates within sandstone beds or adjacent silty mudstones; and (3) the late phases of the intergranular and fracture-filling calcite cements were deposited from hot circulated basinal fluids.Calcite cementation acts as a main controlling factor on the reservoir quality in the Flemish Pass reservoir sandstones. Over 75% of initial porosity was lost due to the early calcite cementation. The development of secondary porosity (mostly enlarged, moldic pores) and throats by later calcite dissolution due to maturation of organic matters (e.g., hydrocarbon and coals), was the key process in improving the reservoir quality.     

Seismic attenuation estimation using a complete ensemble empirical mode decomposition-based method

The frequency attenuation gradient method can provide important information for hydrocarbon detection. In this paper, a method using Complete Ensemble Empirical Mode Decomposition (CEEMD), Hilbert transform and the least-squares curve-fitting is proposed for seismic attenuation estimation as an effective frequency attenuation gradient estimation approach. We first use CEEMD to obtain the different Intrinsic Mode Functions (IMFs), which have a narrow band and can enhance the physical meaning of instantaneous attributes trace by trace. The time-frequency spectrum, which is computed using a Hilbert transform of each IMF, is represented as a spectrum with a single-peak that has narrow side lobes, which is conducive to frequency attenuation gradient estimation. Second, for each time sample, the frequency-amplitude spectrum of each IMF trace is extracted from the time-frequency spectrum to conduct the attenuation gradient computation. Then, the logarithm operation is performed for each IMF trace. Due to the very narrow bands of some IMFs in some seismic traces, a variable frequency window is adopted along the IMF trace according to the local data characteristics. Finally, the attenuation gradient for each IMF in a seismic trace can be computed using least-squares fitting. A different IMF reflects a seismic trace with a different spatiotemporal scale and can highlight different geologic and stratigraphic information. The correlation weighted average operation is used to highlight some useful details in seismic trace and obtains the attenuation gradient for each seismic trace. Field data examples demonstrate our method and its effectiveness. The proposed method can stably estimate the frequency attenuation gradient.