高分辨率遥感技术在厦门海湾生态环境调查中的应用

对于局部区域研究，高分辨率卫星遥感及其影像的智能化处理技术是获取信息的新手段．本文以IKONOS遥感影像在厦门海湾的应用为例，探讨高分辨率遥感卫星影像应用于海湾生态环境调查与分析的应用技术．通过分析高分辨率影像地物特征，提出高分辨率遥感影像的重要处理技术：采用不同缩放尺度进行分类和利用空间特征及纹理结构进行专题信息提取。     

遥感与GIS支持下的海洋渔业空间分布研究——以东海为例

基于海洋渔业多年来生产实践所表明的海洋渔场与海洋水文要素密切相关性,将研究区的遥感融合信息与生产数据进行GIS空间配准,同时建立了诸多要素数据的空间聚类模式,利用该模式提取了水文信息和中心渔场信息相关联的空间分布规律的隐伏信息,由此阐述了实现海洋渔业现代化,应用空间遥感融合信息和GIS支持下指导海洋渔业生产的渔情预报有着重要意义.     

海底剖面声阻抗分布声遥测模拟实验研究

本文介绍一种声遥测海底平面层系声阻抗分布的模拟实验结果。实验在油漆厂冷却水池中进行,采用取样平均迭代的反演方法,对三介质层系的遥测结果与实测值较好地接近。     

南海北部含油气构造上方化探异常研究

在南海北部利用地球化学方法作为油气勘探的一种辅助手段。在6个航次中采集了沉积物、底层海水及海面大气样品，测定了近50种化探指标，并采用稳健统计方法进行了数据处理和异常圈定。化探结果在油气藏上方发现了清晰的、具不同指标组合的综合化探异常，与邻近空构造形成鲜明的对照。圈闭顶部的块状异常和圈闭周绿的环状、半环状异常是下伏油气藏的良好指示，而剖面上呈锯齿状、平面上呈线状的异常则与断裂带有关。实践表明，建立已知油气藏上方的化探异常模式及解剖已知空构造上方的地球化学特征对于指导本区或邻区的化探异常评价是十分必要的。     

黄河断流对河口空间场后效反馈的遥感复合信息研究

就黄河断流对河口空间场后效所涉及的地理要素的演变,以所建河口演变概念-遥感信息系统,分析研究了黄河口近期演变的互关联信息基础,并依据研究目标的信息需求分析(IRA)与水下地貌趋势面分析的结果,阐述了河口空间场诸种反馈信息、变异中直观信息及隐伏信息.     

Three-dimensional inversion of marine magnetic anomalies: Implications for crustal accretion along the Mid-Atlantic Ridge (28°–31°30′ N)

We present magnetic field data collected over the Mid-Atlantic Ridge in the vicinity of the Atlantis Fracture Zone and extending out to 10 Ma-old lithosphere. We calculated a magnetization distribution which accounts for the observed magnetic field by performing a three-dimensional inversion in the presence of bathymetry. Our results show the well-developed pattern of magnetic reversals over our study area. We observe a sharp decay in magnetization from the axis out to older lithosphere and we attribute this decay to progressive low temperature oxidation of basalt. In crust which is 10 Ma, we observe an abrupt increase in magnetic field intensity which could be due to an increase in the intensity of magnetization or thickness of the magnetic source layer. We demonstrate that because the reversal epoch was of unusually long duration, a two-layer model comprised of a shallow extrusive layer and a deeper intrusive layer with sloping polarity boundaries can account for the increase in the amplitude of anomaly 5. South of the Atlantis Fracture Zone, high magnetization is correlated with bathymethic troughts at segment end points and lower magnetization is associated with bathymetric highs at segment midpoints. This pattern can be explained by a relative thinning of the magnetic source layer toward the midpoint of the segment. Thickening of the source layer at segment endpoints due to alteration of lower oceanic crust could also cause this pattern. Because we do not observe this pattern north of the fracture zone, we suggest it is a result of the nature of crustal formation process where mantle upwelling is focused. South of the fracture zone, reversals along discontinuity traces only continue to crust 2 Ma old. In crust >2 Ma, we observe bands of high, positive magnetization along discontinuity traces. We suggest that within the discontinuity traces, a high, induced component of magnetization is produced by serpentinized lower crust/upper mantle and this masks the contribution of basalts to the magnetic anomaly signal.     

Remote estimation of surficial seafloor properties through the application Angular Range Analysis to multibeam sonar data

The variation of the backscatter strength with the angle of incidence is an intrinsic property of the seafloor, which can be used in methods for acoustic seafloor characterization. Although multibeam sonars acquire backscatter over a wide range of incidence angles, the angular information is normally neglected during standard backscatter processing and mosaicking. An approach called Angular Range Analysis has been developed to preserve the backscatter angular information, and use it for remote estimation of seafloor properties. Angular Range Analysis starts with the beam-by-beam time-series of acoustic backscatter provided by the multibeam sonar and then corrects the backscatter for seafloor slope, beam pattern, time varying and angle varying gains, and area of insonification. Subsequently a series of parameters are calculated from the stacking of consecutive time series over a spatial scale that approximates half of the swath width. Based on these calculated parameters and the inversion of an acoustic backscatter model, we estimate the acoustic impedance and the roughness of the insonified area on the seafloor. In the process of this inversion, the behavior of the model parameters is constrained by established inter-property relationships. The approach has been tested using a 300 kHz Simrad EM3000 multibeam sonar in Little Bay, NH. Impedance estimates are compared to in situ measurements of sound speed. The comparison shows a very good correlation, indicating the potential of this approach for robust seafloor characterization.     

基于二次散射的水污染遥感模型及其在珠江口水域的应用

根据水中悬浮物、污染物和水分子等的散射和吸收物理机制建模是实现水污染定量遥感的有效途径.基于一次散射的水污染遥感模型简单易行,但在浑浊度较大时其精度不高.在基于一次散射模型的基础上分析了多次散射的能量组成特点,提出再考虑二次散射可使模型的精度显著提高且不至于使模型过于复杂;导出了二次散射的补偿因子,同时给出了考虑二次散射因子的简单计算方法.将该模型应用于珠江口水域的水污染遥感的结果表明,较之基于一次散射的模型,考虑二次散射的水污染遥感模型在精度上有明显改进.遥感提取结果显示,珠江口水域重污染区主要分布在伶仃洋东北部,香港维多利亚港和深圳湾.     

SAS测量水体表观光学参数的方法

SeaWiFS航空模拟器（SAS）是专门为在水面之上测量水体表观光学参数的现场设备。文章在介绍SAS现场测量以及数据处理基本方法的基础上，分析了2002年黄海试验SAS的应用效果，并与剖面法测量数据进行了比对。     

A Sensitivity Analysis of the Waterline Method of Constructing a Digital Elevation Model for Intertidal Areas in ERS SAR scene of Eastern England

A sensitivity analysis of the waterline method of constructing a Digital Elevation Model (DEM) of an intertidal zone using remote sensing and hydrodynamic modelling is described. Variation in vertical height accuracy as a function of beach slope is investigated using a set of nine ERS Synthetic Aperture Radar (SAR) images of the Humber/Wash area on the English east coast acquired between 1992 and 1994. Waterlines from these images are heighted using a hydrodynamic tide-surge model and interpolated using block kriging. On 1:500 slope beaches, an average block height estimation standard deviation of 18–22 cm is achieved. This rises to 27 cm on 1:100 slope beaches, and 32 cm on 1:30 slope beaches. The average heighting error at different slopes is decomposed into components due to waterline heighting error, inadequate sensor resolution and interpolation inaccuracy. It is shown that, at 1:500 slope, waterline heighting error and interpolation inaccuracy are the main error sources, whilst at 1:30 slope, errors due to inadequate sensor resolution become dominant. The ability of the technique to generate intertidal DEMs for almost the entire coastal zone in a complete ERS SAR scene covering 100×100 km is demonstrated.