弹性反射波频谱分析对比法检测浆砌片石挡墙质量

大量的浆砌片石挡墙需要作快速质量检测，作者比较了利用弹性波速、瑞利面波和弹性波频谱分析法后，认为后者分辨率高，方法简单，并作了几百个点的检测，得到了成功。     

Nonlinear earthquake response analysis and energy calculation for seismic slit shear wall structures

Based on the concept of structural passive control, a new type of slit shear wall, with improved seismic performance when compared to an ordinary solid shear wall, was proposed by the authors in 1996. The idea has been verified by a series of pseudo-static and dynamic tests. In this paper a macro numerical model is developed for the wall element and the energy dissipation device. Then, nonlinear time history analysis is carried out for a 10-story slit shear wall model tested on a shaking table. Furthermore, the seismic input energy and the individual energy dissipated by the components are calculated by a method based on Newmark-β assumptions for this shear wall model, and the advantages of this shear wall are further demonstrated by the calculation results from the viewpoint of energy. Finally, according to the seismic damage criterion on the basis of plastic accumulative energy and maximum response, the optimal analysis is carried out to select design parameters for the energy dissipation device.     

从江县翁浪金矿床容矿岩石与围岩蚀变及其找矿标志

文章简单介绍了构造蚀变岩型金矿翁浪金矿床的容矿岩石和围岩蚀变特征，指出该类矿床的找矿标志，对进一步寻找此类矿床有一定的意义。     

高陡土坡喷锚（土钉墙）支护施工技术

通过长沙电力学院西区永久性锚拉挡墙施工实例，介绍喷锚(土钉墙)的施工方法，质量控制关键点等施工技术．     

三峡库区巫山新城超高加筋挡墙变形破坏及修复研究

结合三峡库区弃渣灾害的防治和回填增地,以巫山新城加筋土挡墙等实际工程为典型进行剖析,对加筋土挡墙,特别是超高加筋土挡墙变形破坏机制和过程进行了系统深入的研究。从加筋土挡墙填土物理力学性质室内试验研究入手,采用FLAC等数值计算方法,系统地研究了加筋土挡墙的应力状况和变形破坏特性。将离心模拟技术应用于超高多级加筋土挡墙(H=57m)的研究中,进行了三级加筋土挡墙的离心模型试验,对加筋土挡墙墙背土压力分布规律、挡墙面板和填土的沉降情况以及拉筋的拉力分布规律进行了详细而系统的研究。特别是精心设计出离心模型试验中三级挡墙的面板与拉筋的联结,较真实地反映了实际工程中加筋土挡墙整体复合结构的力学特性。根据研究结果,提出了巫山新城加筋土挡墙修复加固方案,编制了设计报告,并加以实施。目前,修复加固工程效果良好。　对库区,乃至全国超高加筋土挡墙的建设均有指导和示范作用。     

PLS法与隧道围岩稳定性分类

围岩稳定性是隧道工程支护设计的基本参数,采用偏最小二乘回归法,综合考虑多因变量影响因素,对隧道围岩稳定性分类进行回归建模,并取得较好效果.     

CFRP对砖墙抗震加固对比试验研究与计算分析

结合一工程实践的需要，通过5片碳纤维布加固的新建墙体在周期反复荷载作用下的试验，研究了碳纤维布加固对砌体结构抗震性能的影响，以及砌砌体在碳纤维布加固后的受力特性，比较了不同加固方案对砖砌体加固效果的影响，在此基础上讨论了对碳纤维布加固砖墙抗剪承载力计算模型，并提出了简化计算公式。     

空腔结构复合填充墙-钢框架抗侧力性能试验研究

通过空腔结构复合填充墙-钢框架和同尺寸纯钢框架的对比试验，分析了空腔结构复合填充墙-钢框架的抗侧力性能和滞回性能。研究结果证明空腔结构复合填充墙是一种理想的抗侧力体系，可用于多层或小高层钢结构住宅，作为结构的抗侧力构件。     

Introduction of structural aseismic research in China in recent four years

Introduction Greeting the coming of the 21st century, Professor HU Yu-xian and other Chinese scholars briefed the trend of earthquake engineering in China and aboard (HU, 1999; HU, ZHOU, 1999). The experiences and lessons learning from the destructive earthquakes in China and abroad in re-cent years, the damage action of the large velocity impulse in ground motion in near field in seis-mic design, numerous earthquake examples show that there are many weaknesses in aspects of earthquake p…     

Estimation of fundamental periods of shear‐wall dominant building structures

Shear‐wall dominant multistorey reinforced concrete structures, constructed by using a special tunnel form technique are commonly built in countries facing a substantial seismic risk, such as Chile, Japan, Italy and Turkey. In spite of their high resistance to earthquake excitations, current seismic code provisions including the Uniform Building Code (International Conference of Building Officials, Whittier, CA, 1997) and the Turkish Seismic Code (Specification for Structures to be Built in Disaster Areas, Ankara, Turkey, 1998) present limited information for their design criteria. In this study, consistency of equations in those seismic codes related to their dynamic properties are investigated and it is observed that the given empirical equations for prediction of fundamental periods of this specific type of structures yield inaccurate results. For that reason, a total of 80 different building configurations were analysed by using three‐dimensional finite‐element modelling and a set of new empirical equations was proposed. The results of the analyses demonstrate that given formulas including new parameters provide accurate predictions for the broad range of different architectural configurations, roof heights and shear‐wall distributions, and may be used as an efficient tool for the implicit design of these structures. Copyright © 2003 John Wiley & Sons, Ltd.