Comparison of structural and least-squares lines for estimating geologic relations

Two different goals in fitting straight lines to data are to estimate a true linear relation (physical law) and to predict values of the dependent variable with the smallest possible error. Regarding the first goal, a Monte Carlo study indicated that the structural-analysis (SA) method of fitting straight lines to data is superior to the ordinary least-squares (OLS) method for estimating true straight-line relations. Number of data points, slope and intercept of the true relation, and variances of the errors associated with the independent (X) and dependent (Y) variables influence the degree of agreement. For example, differences between the two line-fitting methods decrease as error in X becomes small relative to error in Y. Regarding the second goal—predicting the dependent variable—OLS is better than SA. Again, the difference diminishes as X takes on less error relative to Y. With respect to estimation of slope and intercept and prediction of Y, agreement between Monte Carlo results and large-sample theory was very good for sample sizes of 100, and fair to good for sample sizes of 20. The procedures and error measures are illustrated with two geologic examples.     

FS方法及其在综合多项震兆中的应用

本文提出了一种模式识别方法--FS方法.该方法的特征取为某些论域上的模糊子集.先以每三个原始特征组成子分类器的特征集,“训练”这些分类器,然后对子分类器进行筛选,最后用筛选出的子分类器的“软”分类结果的加权平均作为判别函数,形成总的分类决策.将FS方法应用于综合多项震兆,并进行了一系列控制试验,还与地震学中几种常用的方法进行了对比试验.结果表明,FS方法是稳定和有效的.     

基于区域竞争力对比的新疆旅游资源开发分析

由于资源赋存、区位优势、基础设施、经济发展等方而存在的地域差异,使不同区域在旅游业发展中有不同的业绩和发展潜力。以20纪90年代以来新疆旅游接待量和旅游收入不断增长但旅游目的地地位明显下降为线索,对比研究了新疆的资源禀赋、开发程度、客源市场竞争态等,并调查分析了东南沿海及港澳台地区游客旅游意愿和赴疆游的客源市场潜力。提出区位条件是新疆在现阶段不可抗拒和短期内难以改变的客观因素,必须在现实基础条件下转变思维方式,宏观上以国内远程市场为目标,建立民俗-湖泊-冰川-草原-古迹-沙漠的旅游开发序位；中观上整合近域特殊地理单元内的同构旅游产品以打造品牌；微观上倡导“旅游体验”为核心的管理模式和开发理念。     

Increasing critical sensitivity of the Load/Unload Response Ratio before large earthquakes with identified stress accumulation pattern

The Load/Unload Response Ratio (LURR) method is proposed for short-to-intermediate-term earthquake prediction [Yin, X.C., Chen, X.Z., Song, Z.P., Yin, C., 1995. A New Approach to Earthquake Prediction — The Load/Unload Response Ratio (LURR) Theory, Pure Appl. Geophys., 145, 701–715]. This method is based on measuring the ratio between Benioff strains released during the time periods of loading and unloading, corresponding to the Coulomb Failure Stress change induced by Earth tides on optimally oriented faults. According to the method, the LURR time series usually climb to an anomalously high peak prior to occurrence of a large earthquake. Previous studies have indicated that the size of critical seismogenic region selected for LURR measurements has great influence on the evaluation of LURR. In this study, we replace the circular region usually adopted in LURR practice with an area within which the tectonic stress change would mostly affect the Coulomb stress on a potential seismogenic fault of a future event. The Coulomb stress change before a hypothetical earthquake is calculated based on a simple back-slip dislocation model of the event. This new algorithm, by combining the LURR method with our choice of identified area with increased Coulomb stress, is devised to improve the sensitivity of LURR to measure criticality of stress accumulation before a large earthquake. Retrospective tests of this algorithm on four large earthquakes occurred in California over the last two decades show remarkable enhancement of the LURR precursory anomalies. For some strong events of lesser magnitudes occurred in the same neighborhoods and during the same time periods, significant anomalies are found if circular areas are used, and are not found if increased Coulomb stress areas are used for LURR data selection. The unique feature of this algorithm may provide stronger constraints on forecasts of the size and location of future large events.     

The political-economy of Blair’s “New Regional Policy”

The “region” and “regional change” have been elusive ideas within political and economic geography, and in essence require a greater understanding of their dynamic characteristics. Trailing in the backwaters of the devolution to the Celtic nations of Britain, the contemporary era of New Labour’s political-economic ideology, manifest through “third-way” governance in England places the region and its functional capacity into the heart of geographical inquiry. Drawing upon a new regionalist epistemology, this paper seeks to recover a sense of (regional) political economy through a critical investigation of the development and formulation of Blair’s “New Regional Policy” (NRP). I address how New Labour has attempted to marry economic regionalisation on the one hand, and democratic regionalism on the other. This paper specifically questions the wisdom of such a marriage of politically distinct ideologies through a critical investigation of the underlying contradictions of their strategy from both a theoretical and empirical standpoint. Demonstrated both in the North East “no” vote in 2004, and in the post-mortem undertaken by the ODPM Select Committee in 2005, the paper illustrates how a loss of political drive gradually undermined the capacity of devolution to deliver in England. Finally, I argue that through the lens of the NRP we can speculate on some of the wider issues and implications for the study of regional governance.     

Testing earthquake prediction methods: «The West Pacific short-term forecast of earthquakes with magnitude MwHRV ≥ 5.8»

Analyzing the tables and probability maps posted by Yan Y. Kagan and David D. Jackson in April 2002–September 2004 at http://scec.ess.ucla.edu/~ykagan/predictions_index.html and the catalog of earthquakes for the same period, the conclusion is drawn that the underlying method could be used for prediction of aftershocks, while it does not outscore random guessing when main shocks are considered.     

A laboratory experiment to monitor the contact state of a fault by transmission waves

We performed a series of laboratory experiments in which elastic waves were transmitted across a simulated fault. Two types of experiments were carried out: (1) Normal Stress Holding Test (NSHT): normal stress was kept constant for about 3 h without shear stress and transmission waves were observed. (2) Shear Stress Increasing Test (SSIT): shear stress was gradually increased until a stick-slip event occurred. Transmission waves were continuously observed throughout the process of stress accumulation. We focused on the change in transmission waves during the application of shear stress and especially during precursory slips.It was found in NSHT that the amplitude of transmission waves linearly increased with the logarithm of stationary contact time. The increase amounted to a few percent after about 3 h. Creep at asperity contacts is responsible for this phenomenon. From a theoretical consideration, it was concluded that the real contact area increased with the logarithm of stationary contact time.We observed in SSIT a significant increase in wave amplitude with shear stress application. This phenomenon cannot be attributed to the time effect observed in NSHT. Instead, it can be explained by the mechanism of “junction growth” proposed by Tabor. Junction growth yields an increase in real contact area. It is required for junction growth to occur that the material in contact is already plastic under a purely normal loading condition. A computer simulation confirmed that this requirement was satisfied in our experiments. We also found that the rate at which the amplitude increased was slightly reduced prior to a stick-slip event. The onset time of the reduction well coincides with the onset of precursory slip. The cause of the reduction is attributed to the reset of stationary contact time due to displacement. This interpretation is supported by the result of NSHT. Taking the time of stationary contact in SSIT into account, we may expect the change in wave amplitude to be, at most, only a few percent. The observed slight reduction in increasing rate is, in this sense, reasonable. The static stiffness of the fault also decreases with precursory slip. It was also found that low frequency waves are a better indicator of precursory slip than high frequency waves. This might suggest that low frequency waves with longer wavelength are a better indicator of average behavior of faults. The problem, however, merits a further investigation. The shifts in phase were also found to be a good indicator of the change in contact state of the fault. The changes in both amplitude and phase of transmission waves are unifyingly understood through the theory of transmission coefficient presented by Pyrak-Nolte et al. Rough surfaces have a tendency to give larger stick-slips than smooth surfaces. The amount of precursory slip is larger for rough surfaces than for smooth surfaces. Although it was confirmed by a computer simulation that rough surfaces have larger contact diameters than smooth surfaces, the rigorous relationship between the surface roughness (contact diameter) and the amount of precursory slips was not established.     

A way to synchronize models with seismic faults for earthquake forecasting: Insights from a simple stochastic model

Numerical models are starting to be used for determining the future behaviour of seismic faults and fault networks. Their final goal would be to forecast future large earthquakes. In order to use them for this task, it is necessary to synchronize each model with the current status of the actual fault or fault network it simulates (just as, for example, meteorologists synchronize their models with the atmosphere by incorporating current atmospheric data in them). However, lithospheric dynamics is largely unobservable: important parameters cannot (or can rarely) be measured in Nature. Earthquakes, though, provide indirect but measurable clues of the stress and strain status in the lithosphere, which should be helpful for the synchronization of the models.The rupture area is one of the measurable parameters of earthquakes. Here we explore how it can be used to at least synchronize fault models between themselves and forecast synthetic earthquakes. Our purpose here is to forecast synthetic earthquakes in a simple but stochastic (random) fault model. By imposing the rupture area of the synthetic earthquakes of this model on other models, the latter become partially synchronized with the first one. We use these partially synchronized models to successfully forecast most of the largest earthquakes generated by the first model. This forecasting strategy outperforms others that only take into account the earthquake series. Our results suggest that probably a good way to synchronize more detailed models with real faults is to force them to reproduce the sequence of previous earthquake ruptures on the faults. This hypothesis could be tested in the future with more detailed models and actual seismic data.     

我国入境旅游和经济增长关系分析

文章分析了入境旅游发展的区域差异，并用Granger因果检验来考察入境旅游和各区域经济增长之间是否存在相应的因果关系，Granger因果检验的结果表明在东部地区，入境旅游和经济增长存在单向因果关系。东部地区的入境旅游对区域的经济增长产生显著影响。但是全国和中西部地区的入境旅游与经济增长之间不存在显著的因果关系。类似地，东部地区入境旅游增长是其第三产业增长的Granger原因。但是全国和中西部地区的入境旅游和相应区域第三产业的增长并不存在显著的因果关系。在区域层面上。只有少数区域支持入境旅游是区域GDP增长的Granger原因，它们是东部地区的北京、广东、上海、天津、福建、江苏、浙江、海南和广西；中部地区的黑龙江和湖南以及西部地区的云南和陕西。在这些省区市。入境旅游对区域经济增长产生显著的影响。但总体而言，入境旅游在我国还没有足够的发展。