Fitness-for-Purpose of Reference Material Reference Values in Relation to Traceability of Measurement, as Illustrated by USGS BCR-1, NIST SRM 610 and IAEA NBS28

As in all fields of sample analysis, reference materials play a large role in supporting measurements in the geosciences. While a rather large number of materials are in distribution (> 380), not all are equally effective or fit-for-purpose in supporting laboratory data quality and thereby assuring the desired comparability of measurements between laboratories. Equally important, reference values that are not fit-for-purpose cannot be used effectively to establish traceability links between laboratory measurements and national and international standards. The needed fitness-for-purpose is not achieved for reference values either when more than one reference value has been proposed and a consensus does not exist among users as to which should be used by all, or when reference value uncertainties are too large in comparison to those of routine laboratory measurements. The focus of this review will be, first to outline the current reality, and second to suggest ways in which certifications of RMs can be improved to provide reference values that are universally accepted and more fit-for-purpose in general laboratory use. The discussion will be illustrated largely by current uses of USGS BCR-1, NIST SRM 610 and IAEA NBS28, as these three materials are those for which the largest body of newly published data exists, according to recent bibliographies of the geoanalytical literature published annually in Geostandards Newsletter: The Journal of Geostandards and Geoanalysis.     

Preparation of a New Geological Survey of Japan Geochemical Reference Material: Coral JCp-1

A new geochemical reference material, coral Porites sp. JCp-1 has been prepared by the Geological Survey of Japan (GSJ). Provisional values for twenty one major, minor and trace elements are presented. The homogeneity tests showed that all elements studied are considered to be homogeneously distributed.     

某地平板玻璃原料用石英砂的提纯研究

某地石英矿砂通过磁选分离法、稀酸浸泡法处理后，矿砂不同程度地降低了铁、铝、钙镁的含量；采用磁选分离 稀酸浸泡法联合处理后，使该地石英砂的化学成分达到了优质的生产平板玻璃用硅质原料的国家标准。     

压电双晶片双向大幅振动的探讨

通过压电陶瓷的逆压电效应对压电陶瓷双晶片在自动生产送料线上的应用研究，得出在二元系Ph(Ni1／3Nb2／3)O3-PhTiO3-PhZrO3的基础上作调整制作的压电双晶片。经运用在振动料斗上，作调频调幅控制。达到了压电双晶片振子结构，振子谐振频率为300Hz，当外加电压达300V时，振子偏转位移量大于1．7mm，故可作为一种理想的振动源。     

夏塞地区银、锡多金属矿成矿规律新认识

夏塞地区是西南三江(金沙江、澜仓江、怒江)地区东缘的一个重要成矿带，带内银、锡矿产责源十分丰富。本文认为其成矿物质来源于花岗岩体和地层，构造和岩体是区内的主要控矿因素，地壳演化与成矿作用关系十分密切，矿床类型为分布于岩体内接触带的矽卡岩型矿床和分布于岩体外接触带的热液型矿床。     

兰坪白秧坪铜银多金属矿床成矿物质来源的铅和硫同位素示踪

白秧坪铜银多金属矿床主要产于白垩系下统景星组石英砂岩、粉砂岩中，矿石铅同位素组成特征与景星组砂岩的铅同位素组成比较接近，表明壳源物质参与了成矿作用。作ZartMan图解和△γ—△β图解表明，矿石铅属于壳幔混合来源。矿石铅μ值介于9．43—9．65之间，Th/U比值介于3．72—3．87之间，表明矿石铅为壳幔混合铅。该矿床硫同位素组成表明，硫来源于深部地幔硫遭受地壳硫的混入。该矿床的成矿作用发生于开放体系之中，成矿物质来源为深部幔源物质混合了壳源物质。     

添加剂对土体的加固作用及冻胀防治研究

将研制的高分子有机材料作为添加剂，加入到土体中，经过拌和夯实、干燥固结，能够起到稳定和提高土体的强度，并具有低渗透和低吸水等特性．冻胀试验表明：加入添加剂不仅能阻止土体冻胀的产生、外来水源的入侵及水分的迁移，还能隔断土体孔隙之间的联系，使水分在土体孔隙中不能运移，从而达到了防治冻胀的目的。     

冀北地区金矿床He、Ar、Pb同位素组成及其成矿物质来源

成矿物质来源一直是成矿理论研究和找矿实践的焦点问题。选择了冀北地区3个幔枝构造金矿集中区11个金矿床黄铁矿及部分围岩进行了He、Ar同位素测定。研究表明,冀北地区主要金矿的3He/4He的值域为(0.93～7.30)×10-6,平均3.55×10-6;R/Ra=0.66～4.93,平均2.53;40Ar/36Ar=426～2073,40Ar平均为8.20×10-7cm3/g,4He/40Ar平均为2.17。矿区外围片麻岩和花岗岩的3He/4He值仅为(0.001～0.55)×10-6,反映来源上有明显差别。3He和4He在He同位素浓度图上落于地幔区附近。64个Pb同位素数据表现为矿质以幔源为主,确有部分壳源物质加入。研究认为,本区成矿物质应源于地球深部,随地幔柱多级演化,深部成矿流体由地球深部迁移到浅部,期间不可避免地存在壳幔流体的混合作用,故其值域往往界于地幔和地壳之间。     

现实空间、思维空间、虚拟空间——关于人类生存空间的哲学思考

基于空间的基本概念以及现代高新技术对人类生存空间的拓展，提出了“三类空间划分”的思想体系；分析了它们各自的特点及其相互关系；阐述了该思想体系的意义。     

氯对测定化合水的影响及其校正研究

用差热和热（失）重法、ｐＨ值检验、离子色谱等分析方法考察和证实了Ｃｌ－对平菲尔特管重量法测定化合水（Ｈ２Ｏ＋）的干扰，研究其影响规律，提出用系数校正方法可获得Ｈ２Ｏ＋的准确结果。方法用于含氯深海沉积物和大洋多金属结核标准物质中Ｈ２Ｏ＋的定值分析，取得满意结果