福建地区波速比分布特征

选取福建地震台网"十五"观测系统2009—2015年记录的748个M_L≥1.0地震事件,采用多台和达法计算福建区域波速比值和泊松比值,并绘制二者空间等值线图,分析其分布特征,讨论波速比值高低与震级大小和震源深度的关系,结果发现,波速比大小与二者关系不大。     

“SZ-4”飞船高度计天线指向角反演方法

利用2003年2月7到8日“SZ-4”高度计的波形数据,经过波形数据预处理(波形为1 s的平均、去除热噪声和波形归一化)后,对海面回波波形后沿进行拟合,计算出了高度计天线的指向角,结果表明,“SZ-4”飞船高度计天线的指向角几乎全部在0.024°以内,天线指向在计算时间内比较稳定.     

全国分县土地经济系数计算方法及比较

阐述土地经济系数的设置意义和目标,针对全国分县土地经济系数计算,提出并分析比较了统计指标法和分区样点法等思路及其数学处理方法。其中统计指标法中的农业产值消耗法基础数据来源可靠、便利,便于操作,计算结果较好,符合土地经济系数含义要求。     

软土地下工程抗震数值模拟的若干关键问题

针对我国地下工程建设项目抗震安全性能设计和评估的需求,并基于目前缺少完善的地下结构抗震分析方法和专门的地下结构抗震设计规范的现状,重点阐述了采用有限元方法进行地下工程数值模拟和分析时需要特别关注的三方面问题：计算范围、土一结构动力相互作用和边界条件。着重分析了有限元网格的划分、土一结非线性接触问题和不同边界条件的适用性,以及这些建模条件对计算结果可靠性的影响。对基于数值手段开展地下工程抗震安全性能的计算、分析和评价,制定地下结构抗震设计规范或规程,可提供有益参考。     

瞬变电磁法的探测深度问题

用解析分析、时域有限差分、时-频分析的方法,以地面中心回线装置和阶跃脉冲激励源为例,分析讨论了瞬变电磁测深法的勘探深度问题,以便为野外勘探工作设计提供依据,达到预期的探测目的.解析计算证实了瞬变场在地下以有限速度传播,数值模拟表示出了准静态条件下瞬变场的反射.研究结果表明,由于时间域电磁场遵循因果律,瞬变电磁法的探测深度主要由观测时间决定. 瞬变电磁场的初始传播速度与大地电阻率无关,继后在大地色散作用下,阶跃脉冲前沿逐渐变得平缓,各频率分量的传播速度与电阻率有关,在低阻地层中探测同样的深度需要较长的观测时间. 最大探测深度是在给定时间内电磁波往返地下某一深度的单程距离,最小探测深度受仪器性能的限制,但是埋藏较浅的异常体也有可能在晚时段被观测到.从时-频密度谱中可得到瞬变电磁场信号时间与频率的关系.     

The Correlation Bias for Two-Dimensional Simulations by Turning Bands

The turning bands method (TBM) generates realizations of isotropic Gaussian random fields by summing contributions from line processes. We consider two-dimensional simulations and study the correlation bias attributable to the use of only a finite number L of lines. Our analytical and numerical results confirm that the maximal bias is of order 1/L, and that L = 64 lines suffice for excellent covariance reproduction. The notorious banding observed in simulations with an insufficient number of lines is a related but different phenomenon and depends strongly on the choice of the line simulation technique. Clear-cut recommendations for the number of lines necessary to avoid the effect can only be based on practical experience with the specific code at hand.     

Modeling the seismic response of basin-edge structure by a sequential waveform method

A sequential waveform method is developed to simulate the seismic response of basin-edge structure excited by a plane incident P-wave. The full procedure involves: (a) a previous parameterization of the investigated model using the seismic wave velocities and depths of the sedimentary stratifications; (b) an input motion determined from the records at stations installed on hard rock; (c) forward computation of the P-SV elastic wave field by means of a two-dimensional finite difference (FD) method; (d) the optimization of the model vector using simulated annealing technique and comparing the simulated seismic response of the tested structure with the observed wave field; (e) the correction of the initial model by trial-and-error by testing the differences between synthetics and observed data, and (f) the final solution obtained by iteration using the conjugate gradient algorithm. The search of an optimal basin-edge model has been parallel processed by varying the shapes and velocities of strata on the basis of the fitting of relative timing, amplitude and phase between the output and the observed data. The input motion and sensitivity have been checked and the validity of the method has been demonstrated by numeric analysis. Using the teleseismic records generated by 7 earthquakes recorded at 26 broadband seismic stations, we have studied the seismic velocity structure of the southern edge of the Jiyang depression located in the Bohai Bay basin, northern China. Two cross sections show an agreement between the velocity results and the geological sections available in the region. In addition, we obtain evidence of three hidden faults under the sections and features that suggest major extensions at the Paleogene.     

瞬态瑞雷面波法在吉林市松江路工程勘察中的应用

介绍瞬态瑞雷面波在工程勘查中的应用,面波勘探原理和数据处理及解释方法。