非线性Rossby波所满足的三阶Zakharov方程与低频振荡

本文在基本气流具有水平切变的情况下,利用摄动法导出了非线性Rossby波所满足的三阶Zakharov方程,然后,考虑了基流具有弱切变的情况,通过使用三阶Zakharov方程研究了Rossby波列的第一类不稳定性问题。结果表明:通过非线性作用,大气中的Rossby波列可产生调制不稳定。同时,本文对这种不稳定的区域,增长率和周期进行了详细的计算,并讨论了波振幅、波数、纬度和基流切变对它们的影响,指出Rossby波列的调制不稳定可以激发30～60天的低频振荡。     

天文光干涉与综合孔径技术的发展

本文简单介绍了光干涉与综合孔径技术发展的历史、国际上用于天文观测的一些著名光干涉仪的技术特点和进展、以及近年来我国开展的与光干涉 ,综合孔径技术有关的工作 ,最后简要介绍了在光学综合孔径技术领域所发展的光纤与集成光学等新技术     

用PCI中断实现射电望远镜跟踪的方法

讨论运用PCI 9054(美国PLX公司生产的接口芯片)作为接口芯片的PCI(Peripheral Component Interconnect)板卡的软硬件设计,以实现天线跟踪的两个时间同步中断。利用标准秒信号中断作为系统时钟同步信号,并同步产生时间间隔为20ms(或40、50ms,可选)的中断信号,来处理天线跟踪指令输出。中断信号通过PCI中断口INTA#接入计算机,在驱动中识别不同的中断信号,并在应用程序响应中断处理后,命令ACU(Antenna Control Unit)机,实现射电天文望远镜的同步跟踪。其控制过程分3部分阐述:硬件设计、驱动程序设计、安装及应用;着重讨论了前两者的设计方法及思路。     

区域GPS网实时计算可降水量的若干问题

目前地基GPS气象学测得的可降水量 (PWV )精度好于 2mm ,但在利用区域GPS网实时计算每个测站上空的PWV时 ,要涉及到很多常规GPS资料处理时所忽略的问题 ,如需考虑数据处理软件和计算方式的选择、站坐标的确定和约束、轨道的使用方法、网外辅助站最佳数量的确定、海潮对实时计算PWV的影响以及实时应用于气象服务时的端部效应等问题。利用上海GPS综合应用网获取的 2 0 0 2年 6、7月份长江三角洲地区入梅前后的数据 ,分析了利用区域性的GPS网实时计算高精度的PWV时要解决的各种问题 ,探讨了其数据处理方案     

利用高光谱数据进行植被生化成分反演方法研究

高光谱数据包含着丰富光谱信息,能够定量地分析物质成分^[1]。由高光谱数据,可以运用多元逐步线性回归方法反演植被生化组分含量,从而达到监测植被生长状况的目的^[2]。本文具体介绍了多元逐步线性回归方法,及其在氮、木质素和纤维素含量估算中的应用。     

Seismic rays in an ellipsoidal earth model: theoretical analysis and estimation of deviations due to the ellipticity

Summary. A first-order form of the Euler's equations for rays in an ellipsoidal model of the Earth is obtained. The conditions affecting the velocity law for a monotonic increase, with respect to the arc length, in the angular distance to the epicentre, and in the angle of incidence, are the same in the ellipsoidal and spherical models. It is therefore possible to trace rays and to compute travel times directly in an ellipsoidal earth as in the spherical model. Thus comparison with the rays of the same coordinates in a spherical earth provides an estimate of the various deviations of these rays due to the Earth's flattening, and the corresponding travel-time differences, for mantle P -waves and for shallow earthquakes. All these deviations are functions both of the latitude and of the epicentral distance. The difference in the distance to the Earth's centre at points with the same geocentric latitude on rays in the ellipsoidal and in the spherical model may reach several kilometres. Directly related to the deformation of the isovelocity surfaces, this difference is the only cause of significant perturbation in travel times. Other differences, such as that corresponding to the ray torsion, are of the first order in ellipticity, and may exceed 1 km. They induce only small differences in travel time, less than 0.01s. Thus, we show that the ellipticity correction obtained by Jeffreys (1935) and Bullen (1937) by a perturbational method can be recovered by a direct evaluation of the travel times in an ellipsoidal model of the Earth. Moreover, as stated by Dziewonski & Gilbert (1976), we verify the non-dependence of this correction on the choice of the velocity law.     

密度和压缩系数的散射层析成像法

本文在速度成像的基础上研究了同时对密度和压缩系数成像的散射波层析成像法.对不同散射角度的计算可以得到一系列反演图像,拟合这些图像,从而可以有效地达到对密度和压缩系数（或速度）成像的目的.与单纯的速度成像相比,增加了反演的难度.首先是对资料的方位性要求增加;其次是对资料的利用率下降.即便如此,从对较少量的炮点和检波点资料的数值计算来看,仍取得了满意的成像结果.我们对组成字母“A”的散射体结构进行了成像计算,结果能够同时再现密度和压缩系数,成像清晰,表明了方法的可行性,并能应用于复杂结构的成像问题.     

青藏高原及邻近区域的S波三维速度结构

本文收集了WWSSN台网和我国台网中13个地震台站的长周期地震记录,用140条10-90s瑞利波频散曲线和作者提出的Tarantola-Backus面波频散层析成象方法,作了青藏高原及邻区的速度反演,得出该地区岩石层速度结构的三维图象.结果表明,1.在10-110km深度范围内,速度结构出现与大地构造特征相关的分区性,显示出四个构造单元:青藏块体、柴达木-巴颜喀拉-三江块体、塔里木块体和印度块体.2.高原内部,深度为10-70km内速度较低,莫霍界面呈不对称盆形分布,藏北那曲附近地壳厚度超过70km,高原边缘壳厚为45-50km,90-110km为高速异常,表明高原内部存在上地幔盖层.3.高原北部的班公湖断裂和东部的三江断裂系是该区重要的分界线,是岩石层结构存在明显差异的重要接触部位,可能是冈瓦纳古陆与欧亚古陆的缝合带.4.柴达木-巴颜喀拉-三江块体内部速度分布不均匀,地壳厚度由北向南从45km加深到60km;在深度90-110km存在一低速层.5.塔里木地块内速度随深度均匀增加,从地壳到上地幔110km内没有发现低速层.地壳厚度约50km.     

论裸眼井中的“共振纵波”和“共振横波”

一、引言 文献[1]和[2]指出,充流体裸眼井中存在频率确定、波速恒定、且沿传播方向不衰减的“共振纵波”和“共振横波”。本文的目的在于论证并指出,这两种波是不存在的。 二、论证 设一点源位于z=0的井轴上,则井轴上z处的声波频率响应为     

Crustal structure at the easternmost termination of the Variscan belt based on CELEBRATION 2000 and ALP 2002 data

The eastern margin of the Variscan belt in Europe comprises plate boundaries between continental blocks and terranes formed during different tectonic events. The crustal structure of that complicated area was studied using the data of the international refraction experiments CELEBRATION 2000 and ALP 2002. The seismic data were acquired along SW–NE oriented refraction and wide-angle reflection profiles CEL10 and ALP04 starting in the Eastern Alps, passing through the Moravo-Silesian zone of the Bohemian Massif and the Fore-Sudetic Monocline, and terminating in the TESZ in Poland. The data were interpreted by seismic tomographic inversion and by 2-D trial-and-error forward modelling of the P waves. Velocity models determine different types of the crust–mantle transition, reflecting variable crustal thickness and delimiting contacts of tectonic units in depth. In the Alpine area, few km thick LVZ with the Vp of 5.1 km s^− 1 dipping to the SW and outcropping at the surface represents the Molasse and Helvetic Flysch sediments overthrust by the Northern Calcareous Alps with higher velocities. In the Bohemian Massif, lower velocities in the range of 5.0–5.6 km s^− 1 down to a depth of 5 km might represent the SE termination of the Elbe Fault Zone. The Fore-Sudetic Monocline and the TESZ are covered by sediments with the velocities in the range of 3.6–5.5 km s^− 1 to the maximum depth of 15 km beneath the Mid-Polish Trough. The Moho in the Eastern Alps is dipping to the SW reaching the depth of 43–45 km. The lower crust at the eastern margin of the Bohemian Massif is characterized by elevated velocities and high Vp gradient, which seems to be a characteristic feature of the Moravo-Silesian. Slightly different properties in the Moravian and Silesian units might be attributed to varying distances of the profile from the Moldanubian Thrust front as well as a different type of contact of the Brunia with the Moldanubian and its northern root sector. The Moho beneath the Fore-Sudetic Monocline is the most pronounced and is interpreted as the first-order discontinuity at a depth of 30 km.