渤、黄、东海底摩擦系数的研究

本文将伴随法用于渤、黄、东海M2分潮的数值模拟,利用Topex／Poseidon高度计资料进行同化,优化海底摩擦系数。文中对底摩擦系数取常数时进行了优化,同时还对底摩擦系数的一种新的处理方法进行了研究,即在计算海区选取一些点给定底摩擦系数,海区中任意一点的底摩擦系数由这些点的底摩擦系数线性播值得到,优化后得到空间分布的底摩擦系数。针对两种不同的线性底摩擦假设分别进行了一系列的实际实验,结果表明由空间分布的底摩擦系数得到的模拟值比底摩擦系数取常数得到的模拟值更接近观测值,能有效地提高数值模拟的精度。     

Experimental study of strong reflection of regular water waves over submerged breakwaters in tandem

A series of laboratory experiments was carried out to investigate the strong reflection of regular water waves over a train of submerged breakwaters. Rectangular and trapezoidal shapes of submerged breakwaters are employed and compared for reflecting capability of incident waves. Measured reflection coefficients of regular waves over impermeable submerged breakwaters are verified by comparing with those of the eigenfunction expansion method. A very good agreement is observed. Reflection coefficients of permeable submerged breakwaters are less than those of impermeable breakwaters. The trapezoidal shape is recommended for a submerged breakwater in terms of reflecting capability and practical application.     

Separation of Waves by Interpolation Method

1 .ＩｎｔｒｏｄｕｃｔｉｏｎＴｏｍｅａｓｕｒｅｔｈｅｒｅｆｌｅｃｔｉｏｎｏｆｉｎｃｉｄｅｎｔｗａｖｅｓｐｒｏｄｕｃｅｄｂｙａｐｈｙｓｉｃａｌｍｏｄｅｌｉｎａｗａｖｅｆｌｕｍｅｉｓａｃｏｍｍｏｎｐｒｏｂｌｅｍｗｉｔｈｐｈｙｓｉｃａｌｔｅｓｔｓｏｆｗａｖｅａｃｔｉｏｎｏｎｃｏａｓｔａｌｓｔｒｕｃｔｕｒｅｓ .Ｗａｖｅｓｇｅｎｅｒａｔｅｄｂｙｔｈｅｗａｖｅ ｍａｋｅｒｐｒｏｐａｇａｔｅｆｏｒｗａｒｄｉｎｔｈｅｗａｖｅｆｌｕｍｅａｎｄａｒｅｒｅｆｌｅｃｔｅｄｂｙｔｈｅｐｈｙｓｉｃａｌｍｏｄｅｌ,ａｎｄｔｈｅ…     

On the radiation and diffraction of linear water waves by an infinitely long rectangular structure submerged in oblique seas

The radiation and diffraction of linear water waves by an infinitely long rectangular structure submerged in oblique seas of finite depth is investigated. The analytical expressions for the radiated and diffracted potentials are derived as infinite series by use of the method of separation of variables. The unknown coefficients in the series are determined by the eigenfunction expansion matching method. The expressions for wave forces, hydrodynamic coefficients and reflection and transmission coefficients are given and verified by the boundary element method. Using the present analytical solution, the hydrodynamic influences of the angle of incidence, the submergence, the width and the thickness of the structure on the wave forces, hydrodynamic coefficients, and reflection and transmission coefficients are discussed in detail.     

Wave interaction with a perforated wall breakwater with a submerged horizontal porous plate

This study examines the hydrodynamic performance of a new perforated-wall breakwater. The breakwater consists of a perforated front wall, a solid back wall and a submerged horizontal porous plate installed between them. The horizontal porous plate enhances the stability and wave-absorbing capacity of the structure. An analytical solution based on linear potential theory is developed for the interaction of water waves with the new proposed breakwater. According to the division of the structure, the whole fluid domain is divided into three sub-domains, and the velocity potential in each domain is obtained using the matched eigenfunction method. Then the reflection coefficient and the wave forces and moments on the perforated front wall and the submerged horizontal porous plate are calculated. The numerical results obtained for limiting cases are exactly the same as previous predictions for a perforated-wall breakwater with a submerged horizontal solid plate [Yip, T.L., Chwang, A.T., 2000. Perforated wall breakwater with internal horiontal plate. Journal of Engineering Mechanics ASCE 126 (5), 533–538] and a vertical wall with a submerged horizontal porous plate [Wu, J.H., Wan, Z.P., Fang, Y., 1998. Wave reflection by a vertical wall with a horizontal submerged porous plate. Ocean Engineering 25 (9), 767–779]. Numerical results show that with suitable geometric porosity of the front wall and horizontal plate, the reflection coefficient will be always rather small if the relative wave absorbing chamber width (distance between the front and back walls versus incident wavelength) exceeds a certain small value. In addition, the wave force and moment on the horizontal plate decrease significantly with the increase of the plate porosity.     

双层局部开孔板沉箱对波浪反射的理论研究

提出了一种用于研究由双层开孔板和一个不透水后板的开孔结构对斜向波反射率的理论分析方法。整个流域被分成三个子域，在每个子域内应用特征函数展开法以得到该域内包含未知展开系数的势函数的表达式，在速度势的展开中，考虑了非传播模态波浪的影响。通过匹配开孔板处的边界条件可以求解待定的展开系数，继而求解双层开孔板防波堤结构对斜向波的反射率。数值计算结果与试验结果进行了比较，符合较好。并进一步讨论了几个重要因素对反射系数的影响。     

分离入射波与反射波的解析方法

提出了一种新的分离入射波和反射波的解析方法（AM）。利用两点处的 波高信息，运用Hilbert变换得到波浪信号在复域内的解析表达式，不需要计算合成波高和相位差即可实现信号的分离。根据分离结果，可以精确地估计入射波与反射波的幅值以及反射系数等参数，能够获得入射波与反射波之间的相位信息，并且可方便地用于不规则波的分离。文中通过数值模拟与物理模型实验对AM法进行了检验，所得的结果与实际值非常吻合。     

浮体间距对多浮体系统水动力系数的影响

根据三维线性势流理论，采用格林函数法，对多浮体系统的水动力系数进行了数值分析。数值算例中给出了在固定波频下水动力系数与浮体间相对位置关系曲线。水动力系数的变化幅度随着浮体间距离增大而变小。随着浮体间距的变化，水动力系数极值的出现具有明显的规律，相邻的极大值(或极小值)的间距为半个波长或一个波长。     

Performance of hemi-cylindrical and rectangular submerged breakwaters

A parametric experimental study is conducted to compare the reflection and transmission characteristics of submerged hemi-cylindrical and rectangular rigid and water-filled flexible breakwater models. The results show that, for the rigid breakwaters, rectangular models are more effective than hemi-cylindrical ones in terms of reduction of transmitted waves. As for the flexible breakwaters, the hemi-cylindrical models may give better wave reflection than rectangular ones. However, the energy loss induced by the rectangular breakwaters is much larger and more significant to result in an overall better efficiency in terms of reduction in wave transmission. The effects of internal pressure show that the lowest pressurized flexible models considered in this work are the most effective in the reduction of the transmitted wave height. Higher wave reflection, lower wave transmission and higher energy loss are obtained consistently at the lower submergence depth ratio.     

Crustal Structures of the Northernmost South China Sea: Seismic Reflection and Gravity Modeling

The South China Sea (SCS) is a marginal sea off shore Southeast Asia. Based on magnetic study, oceanic crust has been suggested in the northernmost SCS. However, the crustal structure of the northernmost SCS was poorly known. To elaborate the crustal structures in the northernmost SCS and off southwest Taiwan, we have analyzed 20 multi-channel seismic profiles of the region. We have also performed gravity modeling to understand the Moho depth variation. The volcanic basement deepens southeastwards while the Moho depth shoals southeastwards. Except for the continental margin, the northernmost SCS can be divided into three tectonic regions: the disturbed and undisturbed oceanic crust (8–12 km thick) in the southwest, a trapped oceanic crust (8 km thick) between the Luzon-Ryukyu Transform Plate Boundary (LRTPB) and Formosa Canyon, and the area to the north of the Formosa Canyon which has the thickest sediments. Instead of faulting, the sediments across the LRTPB have only displayed differential subsidence offset of about 0.5–1 s in the northeast side, indicating that the LRTPB is no longer active. The gravity modeling has shown a relatively thin crust beneath the LRTPB, demonstrating the sheared zone character along the LRTPB. However, probably because of post-spreading volcanism, only the transtension-shearing phenomenon of volcanic basement in the northwest and southeast ends of the LRTPB can be observed. These two basement-fractured sites coincide with low gravity anomalies. Intensive erosion has prevailed over the whole channel of the Formosa Canyon.