不对称抽道集共反射面元叠加方法探讨

总结不对称抽道集共反射面元叠加方法的工作经验，提出自由观测面自由反射界面不对称抽道集共反射面元叠加方法的处理思路和计算方法。在自由观测面的条件下，反射界面可分为简单倾斜平面、规则曲面和自由反射界面三种情况，针对不同情况讨论共反射面元的叠加方法。综合一般情况下的共反射面元叠加方法，提出了“鳞片法”的处理思路。     

杭州华门清水湾别墅区滑坡研究

通过杭州清水湾别墅区滑坡结构、变形特征及主要控制因素的分析,认为滑坡主要是由于人工不适当开挖边坡造成斜坡地质体临空、雨水渗透诱发土体失稳下滑而形成的,通过计算稳定系数和剩余下滑力,对斜坡稳定性作出评价并提供防治方案。     

巴东长江公路大桥桥位边坡稳定可靠性研究

以巴东长江公路大桥桥位边坡为例，在前人稳定性评价的基础上，建立了基于剩余推力法和Sarma法的边坡稳定可靠性分析模型，分析表明边坡系统可靠性指标(β，Pf)能更准确地表达边坡稳定性、安全性和工程风险水平。     

蒸发皿系数Kp计算方法研究

应用指标回归法和定性（风速和相对湿度）定量（吹程）资料，建立了蒸发皿系数Kp计算方程，并用黄河下游引黄灌区48个观测站实测资料进行了验证计算。计算结果表明，应用该方程，可大大改善Kp值的计算精度。     

煤层底板突水系数计算公式的探讨

根据从诸多濒临带压开采威胁的煤矿中得到大量的第一手资料,运用多元统计分析方法,揭示出了煤层底板突水这种地质现象的演化和特征的内在联系和规律,建立了矿压对煤层底板破坏深度的计算式。通过对以往煤层底板突水系数计算公式进行对比、分析、推理和总结,克服了以往计算公式的不足,继承和发展了公式的优点,得出了考虑因素较全面和较科学的突水系数计算式,从而为解决煤层底板隔水岩柱薄弱地带或断裂陷落柱薄弱地带的煤矿安全生产提供了一套行之有效的解决方法。这套公式在太原西峪煤矿和晋城矿务局(西区)得到了应用,证明是一种行之有效的方法。     

仁和压容应变短临异常信息的提取及映震能力分析

自1997年以来，已经在仁和压容应变台监测范围内发生了多次中等地震。应用一元线性回归分析方法对1997年4月到2001年12月底的压容应变和井孔水位资料进行分析处理，对该台1997年4月以来的异常特征和映震能力进行了分析和探讨。     

结构设计地震作用效应影响因素及规律分析

基于现行《建筑抗震设计规范》（GB50011－2001），本文分析了现行抗震设计中影响结构设计地震作用效应的主要因素，以规则平面框架对例对新旧规范影响结构设计地震作用效应的因素进行了对比，给出了其间的重要变化和基本规律。     

低应变反射波法在基桩检测中的应用实例及一些问题的探讨

根据应力波理论，介绍了用低应变反射波法在桩身完整性检测中的几个应用实例，并对检测中的一些问题作了探讨。     

Exploration and discovery in Yellowstone Lake: results from high-resolution sonar imaging, seismic reflection profiling, and submersible studies

‘No portion of the American continent is perhaps so rich in wonders as the Yellow Stone’ (F.V. Hayden, September 2, 1874)Discoveries from multi-beam sonar mapping and seismic reflection surveys of the northern, central, and West Thumb basins of Yellowstone Lake provide new insight into the extent of post-collapse volcanism and active hydrothermal processes occurring in a large lake environment above a large magma chamber. Yellowstone Lake has an irregular bottom covered with dozens of features directly related to hydrothermal, tectonic, volcanic, and sedimentary processes. Detailed bathymetric, seismic reflection, and magnetic evidence reveals that rhyolitic lava flows underlie much of Yellowstone Lake and exert fundamental control on lake bathymetry and localization of hydrothermal activity. Many previously unknown features have been identified and include over 250 hydrothermal vents, several very large (>500 m diameter) hydrothermal explosion craters, many small hydrothermal vent craters (1–200 m diameter), domed lacustrine sediments related to hydrothermal activity, elongate fissures cutting post-glacial sediments, siliceous hydrothermal spire structures, sublacustrine landslide deposits, submerged former shorelines, and a recently active graben. Sampling and observations with a submersible remotely operated vehicle confirm and extend our understanding of the identified features. Faults, fissures, hydrothermally inflated domal structures, hydrothermal explosion craters, and sublacustrine landslides constitute potentially significant geologic hazards. Toxic elements derived from hydrothermal processes also may significantly affect the Yellowstone ecosystem.     

Estimating the orientation error of the Dahan Downhole Accelerometer using the maximum cross-correlation coefficient between the observed and synthetic waves

A new algorithm to correct the orientation error of the accelerometerat the Dahan Downhole Array, Hualien, Taiwan is developed. This algorithmconsists of three stages: (1) rotating two horizontal ground motions on thefree surface to the SH-SVdirection and SH axis offers a reference direction.(2) computing the synthetic downhole SH waves at a downhole station and (3)searching a rotation angle for downhole observation that yields a best waveformmatch between the synthetic and observed downhole seismograms. At this point, the rotated angle corresponding to the best waveform match can be considered as the orientation error. We selected five earthquakes with good data qualityfor analysis. Results show that this algorithm gives a more stable estimationthan a conventional method because it allows the selection of data from a wider time window for analyses. The estimated orientation error of the accelerometers at the Dahan Downhole Array after the 1999 reinstallation are40°, 114° and 285° at depths of 50, 100 and 200 m, respectively.