Estimation of the wave-related ripple characteristics and induced bed shear stress

A large data set on ripples was collected and examined. A set of new formulas for the prediction of the ripple characteristics is proposed with an emphasis on the disappearance of the ripples. The ripple wavelength was observed to be proportional to the bottom wave excursion but also to be a function of the grain-related Shields parameter and wave period parameter introduced by Mogridge et al. (1994). The ripple steepness was found to be nearly constant for orbital ripples, and with a sharp decrease for suborbital ripples. Two empirical functions are added including the effects of the critical Shields parameters (inception of transport and inception of sheet flow), i.e. giving the boundaries for the ripple existence's domain. The proposed formulas yield better prediction capabilities compared to the previously published formulas, especially when ripples are washed out. The effect of the ripple characteristics on the roughness height and the calculation of the bed shear stress is also discussed. It appeared that the bed shear stress calculation is more sensitive to the empirical coefficient a_r introduced in the estimation of the ripple-induced roughness height or to the limits of existence of the ripples than the ripple characteristics themselves.     

真空预压联合碎石桩加固港口吹填堆场地基的试验研究

在港口工程建设中,快速加固超软弱的吹填地基,采用真空预压法是一个经济有效的方法,再联合以碎石桩加固则能进一步提高地基的承载力、减少地基工后沉降.通过真空预压联合碎石桩加固地基的现场试验以及观测资料的分析,得出真空预压联合碎石桩加固后地基的承载力特征值由原天然地基的60 kPa左右提高到220 kPa,计算结果表明打碎石桩后的地基变形模量Esp与真空预压后的Ea相比提高了1倍,联合碎石桩加固后的地基沉降量比仅经过真空预压的地基减少1/3.     

海洋动床物理模型试验地形制作技术

试验模型地形制作是物模试验的一个基本工作,模型制作的好坏直接关系到实验的精度.模型试验之前,需要根据相似理论,选取合适的材料,按照一定的几何比尺进行模型的制作.通过2个具体工程作为实例说明了模型制作的过程、制作的技术性问题和制作经验.     

Numerical modeling of nonlinear water waves over heterogeneous porous beds

The transformation of nonlinear water waves over porous beds is studied by applying a numerical model based on Chen's [2006. Fully nonlinear Boussinesq-type equations for waves and currents over porous beds. Journal of Engineering Mechanics, 132:2, 220–230] Boussinesq-type equations for highly nonlinear waves on permeable beds. The numerical model uses a high-order time-marching solution and fourth-order finite-difference schemes for discretization of first-order spatial derivatives to obtain a computational accuracy consistent with the model equations. By forcing the wave celerity and spatial porous-damping rate of the linearized model to match the exact linear theory for horizontal porous bed over a prescribed range of relative depths, the values of the model parameters are optimally determined. Numerical simulations of the damped wave propagation over finite-thickness porous layer demonstrate the accuracy of both the numerical model and governing equations, which have been shown by prior theoretical analyses to be accurate for both nominal and thick porous layers. These simulations also elucidate on the significance of the higher-order porous-damping terms and the influence of the hydraulic parameters. Application of the model to the simulation of the wave field around a laboratory-scale submerged porous mound provides a measure of its capability, as well as useful insight into the scaling of the porous-resistance coefficients. For application to heterogeneous porous beds, the assumption of weak spatial variation of the porous resistance is examined using truncated forms of the governing equations. The results indicate that the complete set of Boussinesq-type equations is applicable to porous beds of nonhomogeneous makeup.     

长江三角洲北翼全新统底界和“硬粘土层”的讨论

本文以钻孔资料为依据,通过岩石地层学、生物地层学和~(14)C测年分析,认为应以第一海相层底板作为Q_4/Q_(1-3)界线,而不能机械地划在“硬粘土层”顶板;上更新统顶部属河漫、湖沼相沉积,后经暴露、脱水局部层段硬化而成为所谓的杂色“硬粘土层”;本区晚更新世末古地形呈由东、东南向西、西北逐渐抬升的掀斜状,并控制着全新世的海侵方向和范围。     

A field test of a linear stability model for crescentic bars

A morphodynamical linear stability analysis is used to predict the natural development of crescentic bed patterns and rip channels. The purpose is to investigate whether this technique, which is useful for understanding the physics of emerging bed-forms, can be used to make quantitative predictions in the field, which may then be of use for coastal engineers.     

Effects of wave–current interaction on the current profile

Wave–current laboratory experiments have shown that the logarithmic current profile observed in pure current flows is modified due to the presence of waves. When waves propagate opposite the current, an increase in the current intensity is achieved near the mean water level, while a reduction is obtained for following waves and currents. With the aim of analyzing these nonlinear effects along the whole water column, an Eulerian wave–current model is presented. In contrast to previously presented wave–current models, the present is able to include the variation of the free surface elevation due to the wave motion and the effect of a non hydrostatic pressure field. Therefore it does not restrict its application to waves in shallow waters. Moreover, the model is able to simulate all the possible angles between waves and currents.     

南召县石鼓金矿地质特征及成因探讨

石鼓金矿位于北秦岭复杂褶皱带东段,乔端-瓦穴子断裂南侧,牧虎顶花岗岩体之北侧,矿脉的产出受断裂构造控制.矿脉数量多,规模大小不一,成矿与构造岩浆活动等关系密切.矿床类型为石英脉型.     

Micromechanical viscoelasto‐plastic models and finite element implementation for rate‐independent and rate‐dependent permanent deformation of stone‐based materials

This paper presents parallel and serial viscoelasto‐plastic models to simulate the rate‐independent and the rate‐dependent permanent deformation of stone‐based materials, respectively. The generalized Maxwell viscoelastic and Chaboche's plastic models were employed to formulate the proposed parallel and serial viscoelasto‐plastic constitutive laws. The finite element (FE) implementation of the parallel model used a displacement‐based incremental formulation for the viscoelastic part and an elastic predictor—plastic corrector scheme for the elastoplastic component. The FE framework of the serial viscoelasto‐plastic model employed a viscoelastic predictor—plastic corrector algorithm. The stone‐based materials are consisted of irregular aggregates, matrix and air voids. This study used asphalt mixtures as an example. A digital sample was generated with imaging analysis from an optically scanned surface image of an asphalt mixture specimen. The modeling scheme employed continuum elements to mesh the effective matrix, and rigid bodies for aggregates. The ABAQUS user material subroutines defined with the proposed viscoelasto‐plastic matrix models were employed. The micromechanical FE simulations were conducted on the digital mixture sample with the viscoelasto‐plastic matrix models. The simulation results showed that the serial viscoelasto‐plastic matrix model generated more permanent deformation than the parallel one by using the identical material parameters and displacement loadings. The effect of loading rates on the material viscoelastic and viscoelasto‐plastic mixture behaviors was investigated. Permanent deformations under cyclic loadings were determined with FE simulations. The comparison studies showed that the simulation results correctly predicted the rate‐independent and rate‐dependent viscoelasto‐plastic constitutive properties of the proposed matrix models. Overall, these studies indicated that the developed micromechanical FE models have the abilities to predict the global viscoelasto‐plastic behaviors of the stone‐based materials. Copyright © 2009 John Wiley & Sons, Ltd.     

Application of a Bayesian model to infer the contribution of coalbed natural gas produced water to the Powder River,Wyoming and Montana

The Powder River Basin (PRB) of Wyoming and Montana contains significant coal and coal bed natural gas (CBNG) resources. CBNG extraction requires the production of large volumes of water, much of which is discharged into existing drainages. Compared to surface waters, the CBNG produced water is high in sodium relative to calcium and magnesium, elevating the sodium adsorption ratio (SAR). To mitigate the possible impact this produced water may have on the quality of surface water used for irrigation, the State of Montana passed water anti‐degradation legislation, which could affect CBNG production in Wyoming. In this study, we sought to determine the proportion of CBNG produced water discharged to tributaries that reaches the Powder River by implementing a four end‐member mixing model within a Bayesian statistical framework. The model accounts for the ⁸⁷Sr/⁸⁶Sr, δ¹³C_DIC, [Sr] and [DIC] of CBNG produced water and surface water interacting with the three primary lithologies exposed in the PRB. The model estimates the relative contribution of the end members to the river water, while incorporating uncertainty associated with measurement and process error. Model results confirm that both of the tributaries associated with high CBNG activity are mostly composed of CBNG produced water (70–100%). The model indicates that up to 50% of the Powder River is composed of CBNG produced water downstream from the CBNG tributaries, decreasing with distance by dilution from non‐CBNG impacted tributaries from the point sources to ~10–20% at the Montana border. This amount of CBNG produced water does not significantly affect the SAR or electrical conductivity of the Powder River in Montana. Copyright © 2013 John Wiley & Sons, Ltd.