Thresholds of intrabed flow and other interactions of turbidity currents with soft muddy substrates

Controlled laboratory experiments reveal that the lower part of turbidity currents has the ability to enter fluid mud substrates, if the bed shear stress is higher than the yield stress of the fluid mud and the density of the turbidity current is higher than the density of the substrate. Upon entering the substrate, the turbidity current either induces mixing between flow‐derived sediment and substrate sediment, or it forms a stable horizontal flow front inside the fluid mud. Such ‘intrabed’ flow is surrounded by plastically deformed mud; otherwise it resembles the front of a ‘bottom‐hugging’ turbidity current. The ‘suprabed’ portion of the turbidity current, i.e. the upper part of the flow that does not enter the substrate, is typically separated from the intrabed flow by a long horizontal layer of mud which originates from the mud that is swept over the top of the intrabed flow and then incorporated into the flow. The intrabed flow and the mixing mechanism are specific types of interaction between turbidity currents and muddy substrates that are part of a larger group of interactions, which also include bypass, deposition, erosion and soft sediment deformation. A classification scheme for these types of interactions is proposed, based on an excess bed shear stress parameter, which includes the difference in the bed shear stress imposed by the flow and the yield stress of the substrate and an excess density parameter, which relies on the density difference between the flow and the substrate. Based on this classification scheme, as well as on the sedimentological properties of the laboratory deposits, an existing facies model for intrabed turbidites is extended to the other types of interaction involving soft muddy substrates. The physical threshold of flow‐substrate mixing versus stable intrabed flow is defined using the gradient Richardson number, and this method is validated successfully with the laboratory data. The gradient Richardson number is also used to verify that stable intrabed flow is possible in natural turbidity currents, and to determine under which conditions intrabed flow is likely to be unstable. It appears that intrabed flow is likely only in natural turbidity currents with flow velocities well below ca 3·5 m s^?1, although a wider range of flows is capable of entering fluid muds. Below this threshold velocity, intrabed flow is stable only at high‐density gradients and low‐velocity gradients across the upper boundary of the turbidity current. Finally, the gradient Richardson number is used as a scaling parameter to set the flow velocity limits of a natural turbidity current that formed an inferred intrabed turbidite in the deep‐marine Aberystwyth Grits Group, West Wales, United Kingdom.     

油气上窜速度实用计算方法

油气上窜速度对钻井施工中下一步施工方案的制定具有重要参考价值。文章在总结分析前人经验的基础上结合现场施工实际对传统油气上窜速度计算公式加以修正,并对修正后的公式中涉及到的参数进行了逐一分析,在不影响正常施工工序的条件下使公式中各参数取值准确性进一步提高。通过现场工程测试,该方法简单实用且计算准确性较高。该计算方法在保证计算结果准确性的同时,也具备较强的现场可操作性,通过大量的实践检验后可进一步推广。     

若尔盖铀矿田漏失层空心微珠泥浆试验研究

若尔盖铀矿是我国四大基本类型铀矿田之一,矿层为灰岩、硅灰岩,圈团状纵向裂隙发育,长孔段失返性全漏失,泥浆性能难以维护,孔壁失稳,堵漏花费大量的人力、物力。为提高钻进效率,针对地层漏失机理,通过降低漏失压力实现平衡钻进,分别开展了空气泡沫、微泡沫泥浆以及空心微珠等低密度泥浆体系的研究和试验。实践表明,空心微珠低密度泥浆体系是一种适合若尔盖铀矿田漏失层钻进的泥浆体系。     

深部盐矿勘探钻井液研究与应用

ZK001井钻遇地层为大段泥岩,部分地层为页岩、含盐泥岩、盐膏层。在泥页岩地层进行大口径全面钻进,钻速较快,固控设备能力有限,引起钻屑中粘土颗粒重复性膨胀、软化及裂解分散,最终可能造成粘土侵,对井内安全造成威胁。深部岩膏层易溶于水,从而导致盐层蠕变、井径扩大、井壁失稳等问题。以ZK001井为例,通过优化钻井液体系及现场施工工艺,解决了地层强造浆、盐层失稳等问题。通过岩石力学测试、阳离子交换容量测试、钻井液体系优选及性能测试,确定了上部地层采用聚合物钻井液体系,下部含盐层取芯钻进转换为饱和盐水钻井液体系。通过选用合适的钻井液密度、粘度、切力量、滤失量、含盐量等指标,可以有效控制上部泥岩井壁稳定、含盐层蠕变、井径扩大的问题。钻进过程中钻井液性能稳定且易于维护,从而保证了钻进工作安全、高效、顺利的进行。     

西秦岭上白垩统红层空间分布及其对青藏高原东北缘隆升的地质约束

通过对西秦岭上白垩统红层地层基本沉积特征的研究和空间高程分布的定量化分析,讨论了西秦岭晚白垩世时期可能的构造地貌状态及西秦岭新生代以来地壳隆升的空间变化规律。取得如下认识:1根据西秦岭上白垩统底部洪积-冲积砾岩层之上普遍存在一套厚度不等的具有风成砂岩特征的红色中细粒砂岩和上部出现以泥岩、泥质粉砂岩为主的湖相沉积,结合现今多分布在不同水系分水岭之上,以及西秦岭中部宕昌-岷县-临潭断裂带两侧上白垩统红层地层顶面高程和底部角度不整合面高程没有显著差异分析,认为西秦岭无论在晚白垩之前经历了何种构造过程,晚白垩世具有整体稳定的泛沙漠-湖盆的古构造地貌状态,且断裂带不具备控制上白垩统沉积的构造边界性质;2现今离散型分布在西秦岭的上白垩统沉积地层反映的原型盆地不是孤立的、受区域断裂控制的山间盆地,而是统一的泛沙漠-内陆湖盆,现今的离散型分布是新生代以来地壳不均匀隆升和侵蚀的结果;3西秦岭上白垩统底部的角度不整合面产状,虽然由于后期构造变动呈非完全水平状态,但总体产状平缓。从大区域尺度分析,可以近似看做原始近水平的古地貌面。通过对该角度不整合面高程信息提取和模拟分析,结果表明,其高程分布具有从南西到北东、从北西到南东逐渐降低,穿越区域断裂带没有显著梯度变化,指示了西秦岭新生代以来的隆升具有整体性和隆升幅度呈连续梯度变化的特征。这可能指示了西秦岭新生代以来的地壳隆升机制主要不是上地壳挤压逆冲缩短,而是在印度板块-欧亚板块碰撞汇聚的动力学背景下,下地壳或上地幔自西南向北东连续流变逐渐增厚,造成了青藏高原东北缘呈向北东突出的弧形扩展隆升。     

Unconsolidated sediment distribution patterns in the KwaZulu-Natal Bight,South Africa: the role of wave ravinement in separating relict versus active sediment populations

This paper examines the distribution of unconsolidated sediment in the KwaZulu-Natal Bight located along the east coast of South Africa. Results show that there is a general shelf-wide sediment distribution of coarser grain sizes between depths of 60 and 100?m, punctuated by a broad swathe of mud offshore of the Thukela River. Seasonal changes in sediment distribution patterns are small, being restricted to seaward fining on the inner shelf off the fluvial sources. Sediment distribution reflects a partitioning between sediment populations that are current- influenced and relict (palimpsest) populations associated with submerged shorelines. Wave ravinement during the deglacial transgression, the reworking of submerged shorelines during sea-level stillstands and, to a lesser extent, the Agulhas Current system, are the dominant controls on sediment distribution.     

陆相红层型铜铅锌矿床与红层盆地热卤水成矿作用

新疆乌恰县乌拉根超大型铅锌矿是中国发现的首个产于陆相红层盆地中的红层型铅锌矿床,对其成矿作用及成因有多种不同认识,但都将其归入现有的一些矿床类型,如喷流沉积型、砂岩型等,却均不能反映其独特的成矿环境与成矿作用。为此,在广泛收集和研究全国陆相红层盆地及其矿产的地质资料基础上,通过区域地质构造背景、含矿建造、矿床特征、控矿因素、成矿物质来源、成矿流体等方面对比分析,认为乌拉根铅锌矿与中国大量产于陆相盆地内红色建造中的红层铜矿,在矿床特征、控矿条件、矿床成因等方面具有高度的一致性,均为陆相红层盆地热卤水作用的结果,是同一类型的矿床。红层型矿床是地洼区的特有矿产,是地球地质演化到地洼阶段才出现的新的矿床类型,陆相红层盆地热卤水作用是一个完全独立的成矿系统,因此将其作为一个单独的矿床类型——红层型矿床是合理的,既具有重要理论意义,也具有重要的实践意义,为铅锌矿找矿开辟了新的方向和领域。     

上海砂性软土地层水平定向钻进泥浆性能调控技术

上海地区水平定向钻进铺管（HDD）钻遇不易成孔的砂性软土的概率甚高,这种地层对泥浆性能有特殊要求。但目前普遍使用的复配型增效商品土粉基调相近,难以就大量工程个案恰如其分地发挥关键功效。为此,论述了该类工程环境下泥浆性能设计要点,分析了材料添配的作用机理,重点给出了泥浆密度、粘度、切力以及失水量等参数调控的宜于实用的若干配材技术,以提供相类似工程条件下泥浆运用的可参考方法。     

四川平武银厂金矿勘探复杂地层钻进技术

四川平武银厂金矿区钻探施工中遇到漏失、缩径、岩心破碎、易孔斜和钻孔事故频发等施工难题,施工难度极大。本文结合地层特点,通过采用绳索取心液动锤、高密度低失水泥浆体系、跟管钻进等工艺技术措施,提高了钻进效率和施工质量,大幅度减少了孔内事故的发生,为顺利完成钻孔施工任务奠定了坚实的基础。     

Main technical innovations of Songke Well No.2 Drilling Project

Songke Well No.2, one of the main part of the scientific drilling project in Songliao Basin, which was drilled 7018 m and acquired the part of cores continuously from the Low Cretaceous to the Carboniferous and the Permian from the 2843 m deep, can be considered as the deepest continental drilling project in Asia. Aiming at the features of longer well sections, larger diameters and multiple spud-ins for coring of Songke Well No.2, this project broke through the “coring in small diameter and reaming in large diameter” spud-in drilling-completion procedures which are always used in large-diameter-well coring for continental scientific drilling projects in domestic and overseas and the drilling method of short-single-cylinder roundtrip footage. At the same time, “coring in the same diameter and completing drilling at one single diameter” was achieved at all φ311 mm and φ216 mm coring sections of more than one thousand meters long, high-efficient operation with “drilling long footage with drill tools combined in multi-cylinders” was achieved at deep coring section. Four world drilling records were created which include more than a thousand meters continuous coring at φ311 mm, and the footage per roundtrip footage at φ311 mm, φ216 mm and φ152 mm is all more than 30 m, all of these breakthroughs reduced at least 300 days for this project; moreover, considering the characteristics of formations that the geothermal gradient is high in the drilled sections and the inside-well temperature is over 240°C after drilling completion, a formate-polymer water-based mud system was developed by compounding attapulgite and sodium bentonite and by adding independently developed high-temperature stabilizer, which can provide critical technical support for successful well completion at 7018 m in the super-high-temperature environment It is the first time that the water-based mud is operated at the working temperature higher than 240°C in China; Besides, considering the high-quality requirement on cores imposed by the project, the method “mechanical cored is charge” to discharge core nondestructively on the ground was worked out, and more than 4000 m scatheless cores were discharged out of the drill pipes while maintaining original stratum structures.