The δ13C–δ18O variations in marble in the Hida Belt,Japan

Marble has a great potential to understand a history of various geological events occurring during tectonic processes. In order to decode metamorphic–metasomatic records on C–O isotope compositions of marble at mid-crustal conditions, we conducted a C–O–Sr isotope study on upper amphibolite-facies marbles and a carbonate–silicate rock from the Hida Belt, which was once a part of the crustal basement of the East Asian continental margin. Carbon and oxygen isotope analyses of calcite from marbles (Kamioka area) and a carbonate–silicate rock (Wadagawa area) show a large variation of δ¹³C [VPDB] and δ¹⁸O [VSMOW] values (from −4.4 to +4.2 ‰ and +1.6 to +20.8 ‰, respectively). The low δ¹³C values of calcites from the carbonate–silicate rock (from −4.4 to −2.9 ‰) can be explained by decarbonation (CO₂ releasing) reactions; carbon–oxygen isotope modeling suggests that a decrease of δ¹³C strongly depends on the amount of silicate reacting with carbonates. The occurrence of metamorphic clinopyroxene in marbles indicates that all samples have been affected by decarbonation reactions. All δ¹⁸O values of calcites are remarkably lower than the marine-carbonate values. The large δ¹⁸O variation can be explained by the isotope exchange via interactions between marble, external fluids, and/or silicates. Remarkably low δ¹⁸O values of marbles that are lower than mantle value (~+5 ‰) suggest the interaction with meteoric water at a later stage. Sr isotope ratios (⁸⁷Sr/⁸⁶Sr = 0.707255–0.708220) might be close to their protolith values. One zircon associated with wollastonite in a marble thin-section yields a U–Pb age of 222 ± 3 Ma, which represents the timing of the recrystallization of marble, triggered by H₂O-rich fluid infiltration at a relatively high-temperature condition. Our isotope study implies that the upper amphibolite-facies condition, like the Hida Belt, might be appropriate to cause decarbonation reactions which can modify original isotope compositions of marble if carbonates react with silicates.     

From an initial transient-state to a steady-state in metamorphic reactions: An experimental approach in the system dolomite-quartz-H2O

Abstract We carried out hydrothermal experiments in the system dolomite‐quartz‐H₂O to track the temporal change in reaction rates of simultaneous reactions during the development of reaction zones. Two types of configurations for the starting materials were prepared: dolomite single crystals + quartz powder + water and quartz single crystals + dolomite powder + water, both sealed separately in gold capsules. Runs at 0.1GPa and 600°C with cold seal pressure vessels gave the following results. (i) In short duration (45–71 h) runs metastable layer sequences involving wollastonite and talc occur in the reaction zone, whereas they disappear in longer duration (168–336 h) runs. (ii) The layer sequence of the reaction zones in short duration runs differs from place to place on the dolomite crystal even in the same run. (iii) The diversity of layer sequences in the short duration runs merges into a unique layer sequence in the longer duration runs. (iv) The reaction zone develops locally on the dolomite crystal, but no reaction zone was observed on the quartz crystal in any of the runs. The lines of evidence (i)–(iii) show that the system evolves from an initial transient‐ to a steady‐state and that the kinetic effect is important in the development of reaction zones. A steady diffusion model for the unique layer sequence Qtz/Di/Fo + Cal/Dol + Cal/Dol shows that the Dol + Cal layer cannot be formed by diffusion‐controlled process and that the stability of the layer sequence Qtz/Di/Fo + Cal/Dol depends not only on L‐ratios (a = /L_CaOCaO and b = /L_MgOMgO) but also on the relative rate P = (−2ξ₁ − ξ₂)/(–ξ₁ − 2ξ₂) of competing reactions: Dol + 2Qtz = Di + 2CO₂ (ξ₁) and 2Dol + Qtz = Fo + 2Cal + 2CO₂ (ξ₂). For smaller P the stability field will shift to higher values of a and b. The steady diffusion model also shows that the apparent‐non‐reactivity on the quartz surface can be attributed to void formation in a large volume fraction in the diopside layer.     

Sediment routing hypothesis for pool‐riffle maintenance

This paper provides comprehensive evidence that sediment routing around pools is a key mechanism for pool‐riffle maintenance in sinuous upland gravel‐bed streams. The findings suggest that pools do not require a reversal in energy for them to scour out any accumulated sediments, if little or no sediments are fed into them. A combination of clast tracing using passive integrated transponder (PIT) tagging and bedload traps (positioned along the thalweg on the upstream riffle, pool entrance, pool exit and downstream riffle) are used to provide information on clast pathways and sediment sorting through a single pool‐riffle unit. Computational fluid dynamics (CFD) is also used to explore hydraulic variability and flow pathways. Clast tracing results provide a strong indication that clasts are not fed through pools, rather they are transported across point bar surfaces, or around bar edges (depending upon previous clast position, clast size, and event magnitude). Spatial variations in bedload transport were found throughout the pool‐riffle unit. The pool entrance bedload trap was often found to be empty, when the others had filled, further supporting the notion that little or no sediment was fed into the pool. The pool exit slope trap would occasionally fill with sediment, thought to be sourced from the eroding outer bank. CFD results demonstrate higher pool shear stresses (τ ≈ 140 N m^–2) in a localized zone adjacent to an eroding outer bank, compared to the upstream and downstream riffles (τ ≈ 60 N m^–2) at flows of 6 · 2 m³ s^–1 (≈ 60% of the bankfull discharge) and above. There was marginal evidence for near‐bed velocity reversal. Near‐bed streamlines, produced from velocity vectors indicate that flow paths are diverted over the bar top rather than being fed through the thalweg. Some streamlines appear to brush the outer edge of the pool for the 4 · 9 m³ s^–1 to 7 · 8 m³ s^–1 (between 50 and 80% of the bankfull discharge) simulations, however complete avoidance was found for discharges greater than this. Copyright © 2013 John Wiley & Sons, Ltd.     

Genetic relationship of metamorphic reaction and dehydration-melting

The high-temperature and pressure experimental data of garnet, sillimantite and biotite-bearing potash feldspar gneiss (SGBG, natural block rock) has shown that metamorphic reactions between garnet and melt, and mineral assemblage evolutional features are not only controlled byP-T condition, but also genetically correlate with dehydration-melting of biotite and partial melting of felsic minerals. Combining experimental data with theoretical analyses, the genetic mechanism of metamorphic reaction and its dynamic significance have been demonstrated in the process of metamorphic evolution of khondalite series on the border of Jin (Shanxi Province)-Inner Mongolia. Project supported by the Youth Geologist Foundation of Ministry of Geology and Mineral Resources of China, the Post-docter Foundation and the National Natural Science Foundation of China (Grant No. 49572138).     

Two stages of isotopic exchanges experienced by the Ertaibei granite pluton, northern Xinjiang, China

¹⁸O/¹⁶O and D/H of coexisting feldspar, quartz, and biotite separates of twenty samples collected from the Ertaibei granite pluton, northern Xinjiang, China are determined. It is shown that the Ertaibei pluton experienced two stages of isotopic exchanges. The second stage of¹⁸O/¹⁶O and D/H exchanges with meteoric water brought about a marked decrease in the δ¹⁸O values of feldspar and biotite from the second group of samples. The D/H of biotite exhibits a higher sensitivity to the meteoric water alteration than its¹⁸O/¹⁶O. However, the first stage of¹⁸O/¹⁶O exchange with the¹⁸O-rich aqueous fluid derived from the dehydration within the deep crust caused the Δ¹⁸O_{Quartz-Feldspar} reversal. It is inferred that the dehydration-melting may have been an important mechanism for anatexis. It is shown that the deep fluid encircled the Ertaibei pluton like an envelope which serves as an effective screen to the surface waters.     

Influence of “stress reversal” on rock resistivity during loading procedure

The properties of rock resitivity were studied under pressure, particularly with “stress reversal”, a procedure in which the pressure applied was increased and decreased. It was observed that, 1) With pressure increasing, the main feature of resistivity change was increase-steady-decrease for high-saturation rock samples (saturation 70–100%). But the main feature for low-saturation samples was different. 2) In 10 out of 11 cases of “stress reversal” for high-saturation samples the resistivity droped (about 2%). Such drop could explain the anomalies in geoelectricity terms, which are commonly observed before earthquakes in China. 3) It was also observed shortly before rock failure that, a) the resistivity drops more dramatically (about 20%) during “stress reversal” period, which is much more than ordinary drops. b) these drops occurred not only during stress decrease but also during stress increase. c) Resistivity exhibits anisotropy: the resistivity along different directions may differ by 10%. These three features may indicate that the rock is nearing failure, while ordinary resistivity drops are only connected with “stress reversal” and may not mean the imminence of rock failure. 4) Resistivity increase was observed during the “stress reversal” period for low-saturation rock samples. The results mentioned above were explained with the effect of water flowing in and out of the cracks of rock. The temporary factors which yield a reduction of the maximum main stress, may enhence the possibility of earthquake occurrence.     

长春地区白垩系地层地铁勘察参数的确定

白垩系砾岩及泥岩地层在长春地区普遍存在,但由于砾岩地层现场钻探难以取样进行室内土工试验,泥岩地层由于存在水稳性、膨胀性、崩解性等因素影响,砾岩和泥岩的承载力值、抗剪强度参数指标、渗透系数以及基床系数等参数多以经验数据评估方法为主,在合理准确确定相关参数的问题上存在较大分歧。通过对长春地区白垩系砾岩及泥岩进行原位平板载荷试验、浸水载荷试验以及现场原位剪切试验,获取砾岩、泥岩的承载力值、抗剪强度指标、渗透系数以及现场基床系数值等,为地铁建设工程地质问题分析及设计提供充足的地质依据。     

非线性广义文克尔模型探讨

文克尔地基模型的最大缺陷是没有考虑地基土的非线性和连续性。利夫金模型虽然对其连续性进行了改进,但过分考虑了基础形状对基床系数的影响,还导致了在矩形基础长短边方向上基床系数的极不对称。为此提出非线性广义文克尔模型,对文克尔模型特征函数重新进行了定义,修正了利夫金模型的缺点,在合理考虑基础形状和尺寸对地基刚度影响的同时,还能分别模拟几种典型情况的反力分布形式。非线性广义文克尔模型还通过分段线性逼近实际p-s曲线的方法,考虑了地基土的非线性。算例分析表明,非线性广义文克尔模型具有一定的合理性和实用性。     

A new numerical approach to the hyperstatic reaction method for segmental tunnel linings

This paper proposes a numerical approach to the hyperstatic reaction method (HRM) for the analysis of segmental tunnel linings. The influence of segmental joints has been considered directly using a fixity ratio that is determined on the basis of the rotational stiffness. The parameters necessary for the calculation are presented. A specific implementation has been developed using a FEM framework. This code is able to consider the three‐dimensional (3D) effect of segment joints in successive rings on the tunnel lining behaviour. The present HRM allows one to take an arbitrary distribution of segment joints along the tunnel boundary into consideration. In addition, the rotational stiffness of segment joints has been simulated using nonlinear behaviour, as it is closer to the true behaviour of a joint than linear or bilinear behaviour. The numerical results of three hypotheses on ring interaction, which allow the 3D effect of a segmental tunnel lining to be taken into account, have been compared with data obtained from the shield‐driven tunnel of the Bologna–Florence high‐speed railway line project. The numerical results presented in the paper show that the proposed HRM can be used to effectively estimate the behaviour of a segmental tunnel lining. Copyright © 2014 John Wiley & Sons, Ltd.