地热井常见主要问题分析与研究

针对目前地热井施工技术现状及地热井使用中常见的问题，进行了较为详细的分析和研究，并就今后发展方向和建议进行了初步探讨。     

视电阻率观察中一种抗介质干扰的尝试

埋地金属管线对视电阻率的观测危害甚大。造成观测值大幅改变，跳动，无规律可循。严重时，甚至台站报废，被迫搬迁。通过一些突发事件的启发，结合现场实验，并引证了一些理论计算，笔者摸索出了只须对金属管道作局部微小的改造，就能基本克服其对观测的干扰的方法。该方法在红格台试验半年多来，取得了明显的效果。观测值恢复到安装的水管以前的水平，再无大幅度的跳动。该方法节约经费，简单易行，大大提高了台站在复杂环境中的生存能力。     

Chemical forms of heavy metal contaminants in sediments of Miyun reservoir

The chemical forms, spatial distribution and sources of As, Hg, Cd, Pb and Zn in sediments of the Miyun reservoir were studied. The results of sequential extraction demonstrate that most of As, Pb and Zn were bound to the residual fraction, Hg was associated with the sulfide fraction while Cd was associated with the carbonate fraction and the residual fraction. On the vertical profiles the concentrations of the heavy metals in total and each fractions mostly decreased with increasing depths in sediments, suggesting that the heavy metals input from the upstream watershed increases yearly. Summation of the residual fraction, the sulfide fraction and the carbonate fraction accounts for 60.03%―85.60% of the total heavy metal contents in the sediments, which represent the geochemical background values of the elements and relate closely to soil erosion. Results of the main factor analysis show that most sediments of the reservoir come from the upstream soil erosion, the point source pollution and domestic waste. Moreover, the microbial activities taking place on the sediment-water interface are also one of the major factors to cause the increasing content of the organic matter fraction and the iron-manganese oxide fraction. Environmental change of the reservoir water could make the removability of the heavy metals increase, leading to the increase of their concentrations in pore water in sediments, and imperiling water quality of the reservoir.     

Microorganisms in Lianxian lateritic gold deposit in Guangdong and their effects on leaching of heavy metals

Microorganisms in the lateritic profiles of the Lianxian gold deposit in Guangdong were cultured, isolated and identified. The microorganisms include bacteria such as Bacillus, Enterobacter, Pseudomonas, Lactobacillus, Actinetobacter, Aeromona, Listeria, Agrobacteriura, Cotyttebacteriurn, and Moraxella, fungi such as Penicillium, Alter naria, Cladosporium, Saccharcornyces, Mucor, and the chemoautotrophic Thiobacillu.~. It is shown in a leaching experiment that the microorganisms can accelerate the leaching of Cu, Cd, Zn, and that the G- bacteria are most efficient for leaching Cu, Zn and the G^ bacteria are better for leaching Cd.     

Efficient use of resources: urban waste ash and soil fertility on the Jos Plateau, Nigeria

Waste disposal constitutes an acute problem in numerous African cities. One solution could lie in the recycling of the nutrient-rich waste into agriculture taking place in and around cities. Farmers involved in vegetable production around Jos, Nigeria, have developed a sophisticated soil fertility management strategy combining inorganic fertilizers, manure and urban waste ash. This paper: (1) investigates the socio-economic constraints linked to obtaining scarce organic inputs, particularly urban waste ash and the health hazards (particularly heavy metal contamination of soil and crops) caused by using this ash and (2) suggests ways to improve use of this important resource.     

Mathematical model for hydraulically aided electrokinetic remediation of aquifer and removal of nonanionic copper

One of the most cost-effective in situ technologies for soil and groundwater (i.e., aquifer) remediation is electrokinetic remediation. In electrokinetic remediation, electromigration due to electric field is combined with hydromigration due to hydraulic flow by purge water to remove pollutants from aquifers through the pore water. This study aims at investigating theoretically the role of electromigration (as active movement) of pollutants and the role of hydromigration (as passive movement) of pollutants in electrokinetic remediation, and making it clear that the control variables for electrokinetic remediation are the applied voltage and the hydraulic flow rate. These aims are pursued by construction of a mathematical model based on physico-chemical considerations and by model simulations of the electrokinetic remediation applied to the virtual aquifer polluted by heavy metals of copper sulfate. According to numerical simulations with the model: (1) heavy metal (nonanionic copper) is removed from the upstream anode region and accumulated in the downstream cathode region; (2) to carry away the heavy metal outside the aquifer (global removal), hydromigration by purge water flow is essential; and (3) electromigration contributes mainly to the redistribution of heavy metals within the aquifer (local removal and local accumulation).     

Experimental determination of REE partition coefficients between zircon,garnet and melt: a key to understanding high‐T crustal processes

The partitioning of rare earth elements (REE) between zircon, garnet and silicate melt was determined using synthetic compositions designed to represent partial melts formed in the lower crust during anatexis. The experiments, performed using internally heated gas pressure vessels at 7 kbar and 900–1000 °C, represent equilibrium partitioning of the middle to heavy REE between zircon and garnet during high‐grade metamorphism in the mid to lower crust. The D_REE (zircon/garnet) values show a clear partitioning signature close to unity from Gd to Lu. Because the light REE have low concentrations in both minerals, values are calculated from strain modelling of the middle to heavy REE experimental data; these results show that zircon is favoured over garnet by up to two orders of magnitude. The resulting general concave‐up shape to the partitioning pattern across the REE reflects the preferential incorporation of middle REE into garnet, with D_Gd (zircon/garnet) ranging from 0.7 to 1.1, D_Ho (zircon/garnet) from 0.4 to 0.7 and D_Lu (zircon/garnet) from 0.6 to 1.3. There is no significant temperature dependence in the zircon–garnet REE partitioning at 7 kbar and 900–1000 °C, suggesting that these values can be applied to the interpretation of zircon–garnet equilibrium and timing relationships in the ultrahigh‐T metamorphism of low‐Ca pelitic and aluminous granulites.     

Metals discharged during different flow conditions from a mixed agricultural‐forest catchment (NW Spain)

Metal loads were determined from water samples collected under different streamflow conditions (baseflow and storm events) in a rural catchment (NW Spain) during 4 years. A study at annual, seasonal and storm‐event scales was carried out. In all analysed scales, the export order was Fe > Al > Mn > Zn > Cu. A high inter‐annual, seasonal and storm‐event scale variability of metal load was observed. The total metal loads in stream were higher during baseflow conditions than during storm events, which only represented 4% of the duration of the study period and 25% of streamflow. During storm events, both Al and Fe loads accounted 45% of the total load of the study period, whereas Mn, Cu and Zn loads represented 42%, 33% and 24%, respectively. This highlights the role of high flows on metal export. Only four big events exported around 30% of load of each metal transported in events. At all time scales, a prevalence of export of particulate metals over dissolved metals was observed, more pronounced for Al, Fe and Mn than for Cu and Zn. The export of metals in the Corbeira catchment is influenced by runoff and, to a lesser extent, by the rainfall amount. Copyright © 2014 John Wiley & Sons, Ltd.     

泡沫塑料吸附分离富集-电感耦合等离子体质谱法测定稀土矿石中的镓

采用电感耦合等离子体质谱法(ICP-MS)测定稀土矿石中的镓,高含量的稀土元素会造成严重的质谱干扰。本文采用聚氨酯泡沫塑料在6 mol/L盐酸介质中吸附样品溶液中的镓后,以0.5 mol/L氯化铵水浴加热解脱30 min,镓的吸附-解脱效率超过99%,稀土元素等干扰物质基本不进入解脱液中,即在富集镓的同时实现了镓与基体元素的高效分离,降低了质谱干扰。本方法检出限低(0.022μg/g),经土壤及水系沉积物标准物质验证,镓的测定值与标准值吻合(绝对偏差为0.38%~4.70%),实际稀土矿石样品的加标回收率为94.1%~100.6%,精密度(RSD)低于4%(n=12),可应用于分析一般地质样品以及稀土矿石中的镓。     

固体聚合膜电解浓集法测量天然水中低含量氚的化学淬灭效应研究

固体聚合膜电解浓集法是浓缩氚含量较低(1 Bq/m~3)的天然水样的常用方法,但因水样自身含有杂质离子或电解装置聚合膜带入杂质进入浓集液,使浓集液偏酸性,在测量过程中易产生化学淬灭效应,导致氚的测量值偏低。本文研究了水样自身存在的杂质离子和聚合膜上残留的杂质离子、样品溶液的pH值及其电导率所产生的化学淬灭效应的影响,实验表明,为减少化学淬灭效应,提高测量低含量氚的准确性,需保证水样溶液呈中性,电导率≤1μS/cm,同时避免杂质沉积在聚合膜上。如果水样溶液的pH值偏酸性、电导率大于1μS/cm,可采用酸碱混合型离子交换树脂去除水样中自身的杂质;对于聚合膜引入的杂质,可在电解后的水样中加入微量氨水将其pH值调节至中性。