Rate of strike-slip motion on the Amanos Fault (Karasu Valley, southern Turkey) constrained by K–Ar dating and geochemical analysis of Quaternary basalts

The left-lateral Amanos Fault follows a 200-km-long and up to 2-km-high escarpment that bounds the eastern margin of the Amanos mountain range and the western margin of the Karasu Valley in southern Turkey, just east of the northeastern corner of the Mediterranean Sea. Regional kinematic models have reached diverse conclusions as to the role of this fault in accommodating relative motion between either the African and Arabian, Turkish and African, or Turkish and Arabian plates. Local studies have tried to estimate its slip rate by K–Ar dating Quaternary basalts that erupted within the Amanos Mountains, flowed across it into the Karasu Valley, and have since become offset. However, these studies have yielded a wide range of results, ranging from 0.3 to 15 mm a⁻¹, which do not allow the overall role and significance of this fault in accommodating crustal deformation to be determined. We have used the Cassignol K–Ar method to date nine Quaternary basalt samples from the vicinity of the southern part of the Amanos Fault. These basalts exhibit a diverse chemistry, which we interpret as a consequence varying degrees of partial melting of their source combined with variable crustal contamination. This dating allows us to constrain the Quaternary slip rate on the Amanos fault to 1.0 to 1.6 mm a⁻¹. The dramatic discrepancies between past estimates of this slip rate are partly due to technical difficulties in K–Ar dating of young basalts by isotope dilution. In addition, previous studies at the key locality of Hacılar have unwittingly dated different, chemically distinct, flow units of different ages that are juxtaposed. This low slip rate indicates that, at present, the Amanos Fault takes up a small proportion of the relative motion between the African and Arabian plates, which is transferred southward to the Dead Sea Fault Zone. It also provides strong evidence against the long-standing view that its slip continues offshore to the southwest along a hypothetical left-lateral fault zone located south of Cyprus.     

河南省栾川县马圈一带银铅锌多金属找矿方向探讨

马圈一带出露的主要地层为上元古界栾川群和中元古界官道口群 ,是Pb、Zn、Ag的主要含矿地层。燕山期花岗岩在空间上与矿化关系密切。矿体主要受北西向断裂控制 ,常分布在北西、北东向断裂构造交汇部位。根据地球化学特征、矿产分布规律和找矿标志 ,划分出百炉沟西凹—东凹—磨沟、百炉沟—黄花北沟—杨树凹等两个一级和银窝沟—大石渣沟—小石渣沟、板岔沟等两个二级找矿预测区。     

Three Alkali-Rich Intrusive Rock Belts Newly Discovered in the Mt. Kunlun-Mt. Altun Region, Xinjiang, China

The newly discovered three alkali-rich intrusive rock belts in the Mt. Kunlun Mt.Altun region of southern Xinjiang are the Lapeiquan-Yitunbulak alkali-rich intrusive rock belt,the Gez-Taxkorgan alkali-rich intrusive rock belt and the Beilisai-Abulash alkali-rich intrusive rock belt. The former two belts were formed during the Yanshanian period, and the third one was formed during the Himalayan period, which is the youngest alkali-rich intrusive rock belt in China. The discovery of the alkali-rich intrusive rock belts is of great significance in shedding light on the history of tectono-magmatic activities in this region.     

华北地台北缘地球物理场特征与金属矿床预测

对华北地台北缘的地球物理场特征进行了探讨,根据重、磁异常数据反演计算了该地区的莫霍界面、居里界面、磁性界面的起伏.利用地球物理场资料和反演计算结果对该地区的构造格架和断裂进行了推断,同时预测了9个成矿远景区:(1)集宁一呼和浩特金成矿区;(2)张家口一赤城金、银多金属成矿区;(3)密云一高岭金、铜成矿区;(4)青龙一马兰庄金成矿区;(5)秦皇岛、金多金属成矿区;(6)郝家营多金属成矿区;(7)承德地区金、多金属成矿区;(8)赤峰一喀喇沁旗金成矿区;(9)宁城东金、多金属成矿区.     

Gravity and magnetic signatures of volcanic plugs related to Deccan volcanism in Saurashtra, India and their physical and geochemical properties

The Bouguer anomaly and the total intensity magnetic maps of Saurashtra have delineated six circular gravity highs and magnetic anomalies of 40-60 mGal (10⁻⁵m/s²) and 800-1000 nT, respectively. Three of them in western Saurashtra coincide with known volcanic plugs associated with Deccan Volcanic Province (DVP), while the other three in SE Saurashtra coincide with rather concealed plugs exposed partially. The DVP represents different phases of eruption during 65.5±2.5 Ma from the Reunion plume. The geochemical data of the exposed rock samples from these plugs exhibit a wide variation in source composition, which varies from ultramafic/mafic to felsic composition of volcanic plugs in western Saurashtra and an alkaline composition for those in SE Saurashtra. Detailed studies of granophyres and alkaline rocks from these volcanic plugs reveal a calc-alkaline differentiation trend and a continental tectonic setting of emplacement. The alkaline plugs of SE Saurashtra are associated with NE-SW oriented structural trends, related to the Gulf of Cambay and the Cambay rift basin along the track of the Reunion plume. This indicates a deeper source for these plugs compared to those in the western part and may represent the primary source magma. The Junagadh plug with well differentiated ring complexes in western Saurashtra shows well defined centers of magnetic anomaly while the magnetic anomalies due to other plugs are diffused though of the same amplitude. This implies that other plugs are also associated with mafic/ultramafic components, which may not be differentiated and may be present at subsurface levels. Paleomagnetic measurements on surface rock samples from DVP in Saurashtra suggest a susceptibility of 5.5×10⁻² SI units with an average Koenigsberger ratio (Q_n) of almost one and average direction of remanent magnetization of D=147.4° and I=+56.1°. The virtual geomagnetic pole (VGP) position computed from the mean direction of magnetization for the volcanic plugs and Deccan basalt of Saurashtra is 30°N and 74°W, which is close to the VGP position corresponding to the early phases of Deccan eruption. Modeling of gravity and magnetic anomalies along two representative profiles across Junagadh and Barda volcanic plugs suggest a bulk density of 2900 and 2880 kg/m³, respectively and susceptibility of 3.14×10⁻² SI units with a Q_n ratio of 0.56 which are within the range of their values obtained from laboratory measurements on exposed rock samples. The same order of gravity and magnetic anomalies observed over the volcanic plugs of Saurashtra indicates almost similar bulk physical properties for them. The inferred directions of magnetization from magnetic anomalies, however, are D=337° and 340° and I=−38° and −50° which represent the bulk direction of magnetization and also indicate a reversal of the magnetic field during the eruption of these plugs. Some of these plugs are associated with seismic activities of magnitude ≤4 at their contacts. Based on this analysis, other circular/semi-circular gravity highs of NW India can be qualitatively attributed to similar subsurface volcanic plugs.     

海南省五指山土壤中的重金属元素含量

海南省地处热带地区，山地面积占25．4％，五指山是海南山地的核心，也是海南最高峰，从下而上依次分布着砖红壤、赤红壤、黄壤、灌丛草甸土。五指山土壤普遍遍缺，而Zn、Ni、Pb、Cd、Cr、Co含量属正常值。在成土过程中，Cd有一定积累，其他元素有明显淋溶。在自下而上的垂直带谱中，Zn、Co含量呈现递减，Cd则相反，Ni、Pb、Cu、Cr含量呈现波浪式变化。气候因素是影响五指山土壤重金属元素含量及分布的主导因素。     

Sensitivity Analysis of a Feedforward Neural Network for Considering Genetic Mechanisms of Kuroko Deposits

Exploration for volcanogenic massive sulfide deposits of the kuroko-type is underway in many places. Clarifying the spatial patterns of the metals in kuroko deposits will be useful for understanding their genetic mechanisms and for future exploration of such types of deposits. This study represents a spatial distribution analysis on the contents of principal metals of kuroko deposits: Cu, Pb, and Zn, in the Hokuroku district, northern Japan, by a feedforward neural network and 1917 sample data at 143 drillhole sites. The network, which consists of three layers, was trained by the principle of SLANS in which the numbers of neurons in the middle layer and training data are changed to improve estimation accuracy. Using the weight coefficients connecting adjacent neurons, sensitivity analysis of the neural network was carried out to identify factors influencing spatial distributions of the three metals. The coordinates depth (z) direction, Bouguer gravity, and specific lithology such as dacite were determined to be influencing factors. The high frequency of the z coordinate signifies that the metal contents differ to a large extent by depth. The sensitivity vector was defined using sensitivity coefficients for x, y, and z coordinates of an estimation point. We determined that the directions of large vectors were different inside and outside of the Hanawa-Ohdate area. This characteristic is considered to originate from the differences in the permeability of fractures that became the paths for rising ore solutions, and the depths that the solutions mixed with sea water.     

某地平板玻璃原料用石英砂的提纯研究

某地石英矿砂通过磁选分离法、稀酸浸泡法处理后，矿砂不同程度地降低了铁、铝、钙镁的含量；采用磁选分离 稀酸浸泡法联合处理后，使该地石英砂的化学成分达到了优质的生产平板玻璃用硅质原料的国家标准。     

广东大亚湾底质重金属分布特征与环境质量评价

大亚湾是粤东的大型海湾，毗邻深港，其环境质量现状及发展趋势颇受关注。对大亚湾海域45个表层站位、1口浅钻及2个柱状样重金属元素Hg、As、Cd、Cu、Pb、Cr、Zn进行分析，并对底质环境质量进行定量评价。其结果：①大亚湾海域Hg、As、Cu的污染指数Pi值均小于1．0，超标率为0，表明全区未受这些因子污染；②Cd、Zn、Pb、Cr的污染指数Pi值部分大于1．0，表明受到这些因子不同程度的污染，其中Pb的超标率最高，达93．3％，污染指数Pi值为0．83～2．25，为良好—中等污染，总体为轻微污染；Zn的超标率为76．9％，pf值为0．25～2．63，变化较大，总体为轻微污染；Cd的超标率为60．0％，Pi值为0．50～1．78，良好—轻微污染；Cr的超标率为17．8％，Pi值为0，49～1．90，良好—轻微污染；③综合污染指数为1．08～2．21，平均1．37，表明本区均不同程度地受重金属污染，总体属轻微污染，其中范和港污染最为严重，SQI值多在1．5以上，其次为中央列岛附近海域。湾口和澳头—霞涌近岸海域污染较轻。从钻孔及柱状样的重金属含量分布来看，在表层没有明显增多的趋势。     

金属腐蚀探测

本阐述了金属腐蚀的危害性和金属管道腐蚀探测的迫切性，并介绍了几种具有探测腐蚀功能的物探方法。