南京周家山下蜀黄土石英颗粒特征及其物源意义

下蜀黄土的成因和物源一直是学术界研究的热点。对南京周家山下蜀黄土的石英粒度和石英表面微结构进行分析,结果显示:粉砂粒级石英颗粒（5~50 μm）占绝对优势;<20 μm组分平均含量为42.76%,<30 μm组分平均含量为62.98%;粒度分布曲线和累积曲线总体具有颗粒偏细,呈正偏态,分选较差,峰形尖锐,双峰曲线不对称的特征;粒级-标准偏差曲线呈“双峰”分布,两个明显的标准偏差峰值分别出现在7.962 1 μm和39.905 2 μm。石英颗粒表面形态主要以次棱角状为主;表面机械结构具有丰富的蝶形坑、曲脊、贝壳状断口,部分表面出现平行节理面、V形坑;不同粒级组分表面形态和机械结构特征存在差异。分析表明,南京周家山下蜀黄土属典型风成成因堆积物,是多源区物质高度混合搬运堆积的结果。     

Reconstruction of natural groundwater flow paths in the multiple aquifer system of the northern Negev (Israel), based on lithological and structural evidence

 The Judea Group, a limestone and dolomite karstic aquifer of late Albian–Turonian age, is one of the most important sources of water in Israel. In the western part of the country, the Judea Group aquifer is also known as the Yarkon–Taninim basin. In the northern Negev, the Judea Group is a recipient for fresh water flowing southward from the Hebron Mountains and of brackish paleowater flowing northward from Sinai. Very little is known of the hydraulic properties of this aquifer. In order to outline assumed natural flow paths that existed in this karstic environment prior to groundwater exploitation, use was made of lithological, structural, and paleomorphological features. A detailed hydrogeological conceptual model of the Judea Group aquifer in northern Negev was established by the geological interpretation of high-resolution seismic reflection and by analysis of lithological evidence from boreholes. Isopach, isolith-contour, and isolith-ratio maps were compiled for the main lithological components. Increase in transmissivity values is inversely proportional with the cumulative thickness of argillaceous components. The lithological and hydraulic evidence provides the basis for subdividing the subsurface into distinctive permeability zones for the upper and lower sections of the aquifer; for outlining possible preferential groundwater flow paths for both subaquifers; and for improving understanding of groundwater-salinty variations that result from lithological variability, direction of groundwater flow paths, groundwater flow rates, and the duration of rock/water interactions. In an earlier conceptual model of the basin, the Judea Group aquifer was regarded as a continuous and undisturbed entity. The present study reveals an intricate groundwater flow pattern that is controlled by lithological and structural factors that create zones of preferential flow. This interpretation bears on the overall evaluation of groundwater resources and their management and exploitation. Received, December 1996 · Revised, October 1997, June 1998 · Accepted, July 1998     

安家营子金矿含金和无金石英的标型特征

系统研究了安家营子金矿区含金石英和无金石英的微量元素、流体包裹体、颜色、比重、发光、晶胞参数和红外光谱等标型特征，并依据所得数据对这两类石英进行了判别分析，提出了一系列的找矿标志。     

东昆仑东段东昆中构造带韧性剪切作用及其地质意义

东昆仑东段东昆中构造带经历了多期(次)构造事件,现今保留了复杂多样的构造样式。哈图沟、清水泉—塔妥和沟里等地区构造变形十分强烈,且发育有呈NWW-SEE展布的韧性剪切带。通过野外调研及显微构造研究,对东昆中构造带几何学、运动学及动力学等进行了分析,并通过费氏台和EBSD技术对其进行石英C轴组构分析后认为该剪切带为一压-扭性构造界面,且早期为左旋逆冲,晚期为右旋走滑,变形温度为400~550℃。对剪切带内的石英亚颗粒及动态重结晶粒度测量计算出研究区内韧性剪切带古应力值约为153.791 MPa。哈图沟牦牛山组变形砾岩(4个测点)有限应变测量结果显示,越靠近东昆中断裂带砾石Flinn指数、应变程度、罗德系数(绝对值)越大,且Flinn指数均大于1,属拉伸变形。结合区域地质资料,认为东昆仑东段东昆中韧性剪切带形成于晚海西—印支期。     

胶东新城金矿床控矿构造变形环境：显微构造和EBSD组构约束

新城金矿床是典型的"焦家式"破碎带蚀变岩型金矿,矿体形态和规模都严格受到断裂破碎带控制,是探讨复杂构造-流体耦合成矿系统控矿构造变形环境研究的理想选区。断裂破碎带中构造岩既是构造变形行为的载体,也是相应变形环境的受体。论文在新城金矿详细露头构造解析的基础上,系统采集该矿床控矿断裂破碎带定向构造岩样品,进行显微构造和EBSD组构分析。研究区构造岩显微构造特征主要表现为韧性变形和脆性变形。韧性变形有波状消光、带状消光、亚晶粒、动态重结晶、核幔构造、丝带构造、碎(残)斑系、扭折带、变形纹、机械双晶、蠕英结构、云母鱼等;脆性变形有书斜构造和显微裂隙等。长石(残)斑系、扭折带、变形纹、蠕英结构和石英颗粒边界迁移动态重结晶、丝带构造等矿物变形特征表明断裂带成矿前以高温韧性变形为主;石英波状消光、亚晶粒、亚颗粒旋转和膨凸动态重结晶、方解石机械双晶、长石显微裂隙充填物等矿物变形反映成矿期兼有中低温韧性变形和脆性变形;压剪性穿晶裂隙则反映出成矿后主要是低温脆性变形。根据差应力、应变测量和EBSD组构分析,将新城金矿床控矿构造变形环境可以分为3个构造期:成矿前在NW-SE向挤压作用下发生韧-脆性左行剪切变形,600~700℃,差应力61.37~111.09MPa,应变测量轴比a/c为2.295~3.978,动态重结晶石英颗粒边界分维值为1.466~1.599,反映矿区为高温中高压高应变带变形环境,应变速率较大;成矿期为NW-SE向逐渐NEE-SWW向转变的挤压作用,发生压剪性脆性变形,200~500℃,差应力65.91~135.68MPa,应变测量轴比a/c为1.403~2.204,动态重结晶石英颗粒边界分维值为1.321~1.378,反映矿区成矿期为中低温中高压低应变带变形环境,反应速率较小;成矿后在NWW-SEE向挤压作用下发生压剪变形,150~300℃,反映低温低压脆性变形环境。     

粗粒土三轴试验数值模拟与试样颗粒初始架构初探

试样颗粒初始架构是粗粒土室内三轴试验中一个难以人为控制的因素。基于元胞自动机方法,结合粗粒土的室内三轴试验开发了能制备不同颗粒初始架构粗粒土试样的HHC-CA模型,该模型制备的粗粒土试样表征了粗粒土各粒组分布的不均匀性和随机性,再借助FLAC3D进行粗粒土三轴数值模拟试验,并探讨了试样剪切带内的砾石含量和试样砾石含量对内摩擦角的影响。数值模拟结果表明,同一粒径级配下,粗粒土的内摩擦角值与剪切带内的砾石含量呈增函数关系;试样砾石含量的增加可能会出现内摩擦角减小的现象,但同一粒径级配下的内摩擦角均值随试样砾石含量的增加而明显增大。     

内蒙古扎鲁特地区毛伊勒吐岩体形成时代及构造环境

通过对宏观地质特征、岩石矿物学特征、岩石化学和地球化学特征、同位素年代学研究,对毛伊勒吐岩体形成时代和构造环境进行了探讨.依据岩石化学分析结果和岩石学特征,认为该岩体为钙碱性岩石.对其中的石英闪长岩进行了SHRIMP锆石U-Pb年代学测定,206Pb/238U表面年龄统计权重平均值为147.97±0.95 Ma,表明毛伊勒吐岩体侵位时代属于晚侏罗世.结合区域地质演化特征分析,该石英闪长岩是在板块碰撞后地壳抬升时期形成的.     

白云岩之上红色粘土的磁组构特征及其成因指示意义探讨

通过与粉尘堆积,以及玄武岩和片麻杂岩风化剖面磁组构的对比,探讨了以贵州平坝白云岩之上红色粘土剖面磁组构特征及其成因指示意义。红色粘土的各向异性较弱,并且不具有明显的沉积磁组构;母岩的组构特征对红色粘土磁化率各向异性没有明显的控制“痕迹” ;红色粘土与粉尘堆积物之间磁组构特征的明显差异,表明它们在物源和形成机制方面是不同的;红色粘土磁化率及磁组构特征反映出红色粘土中磁性矿物的物质来源和成因具有一定的特殊性。      

Sugarloaf Mountain,central Arizona,USA: A small-scale example of Miocene basalt-rhyolite magma mixing to yield andesitic magmas

Sugarloaf Mountain is a 200-m high volcanic landform in central Arizona, USA, within the transition from the southern Basin and Range to the Colorado Plateau. It is composed of Miocene alkalic basalt (47.2–49.1?wt.% SiO₂; 6.7–7.7?wt.% MgO) and overlying andesite and dacite lavas (61.4–63.9?wt.% SiO₂; 3.5–4.7?wt.% MgO). Sugarloaf Mountain therefore offers an opportunity to evaluate the origin of andesite magmas with respect to coexisting basalt. Important for evaluating Sugarloaf basalt and andesite (plus dacite) is that the andesites contain basaltic minerals olivine (cores Fo_76-86) and clinopyroxene (～Fs_9-18Wo_35-44) coexisting with Na-plagioclase (An_48-28Or_1.4–7), quartz, amphibole, and minor orthopyroxene, biotite, and sanidine. Noteworthy is that andesite mineral textures include reaction and spongy zones and embayments in and on Na-plagioclase and quartz phenocrysts, where some reacted Na-plagioclases have higher-An mantles, plus some similarly reacted and embayed olivine, clinopyroxene, and amphibole phenocrysts.Fractional crystallization of Sugarloaf basaltic magmas cannot alone yield the andesites because their ～61 to 64?wt.% SiO₂ is attended by incompatible REE and HFSE abundances lower than in the basalts (e.g., Ce 77–105 in andesites vs 114–166?ppm in basalts; Zr 149–173 vs 183–237; Nb 21–25 vs 34–42). On the other hand, andesite mineral assemblages, textures, and compositions are consistent with basaltic magmas having mixed with rhyolitic magmas, provided the rhyolite(s) had relatively low REE and HFSE abundances. Linear binary mixing calculations yield good first approximation results for producing andesitic compositions from Sugarloaf basalt compositions and a central Arizona low-REE, low-HFSE rhyolite. For example, mixing proportions 52:48 of Sugarloaf basalt and low incompatible-element rhyolite yields a hybrid composition that matches Sugarloaf andesite well ? although we do not claim to have exact endmembers, but rather, viable proxies. Additionally, the observed mineral textures are all consistent with hot basalt magma mixing into rhyolite magma. Compositional differences among the phenocrysts of Na-plagioclase, clinopyroxene, and amphibole in the andesites suggest several mixing events, and amphibole thermobarometry calculates depths corresponding to 8–16?km and 850° to 980?°C. The amphibole P-T observed for a rather tight compositional range of andesite compositions is consistent with the gathering of several different basalt-rhyolite hybrids into a homogenizing ‘collection' zone prior to eruptions. We interpret Sugarloaf Mountain to represent basalt-rhyolite mixings on a relatively small scale as part of the large scale Miocene (～20 to 15 Ma) magmatism of central Arizona. A particular qualification for this example of hybridization, however, is that the rhyolite endmember have relatively low REE and HFSE abundances.