Determination of potential hazardous elements in Can coals （Canakkale- Turkey）-I

It is known that the increasing use of coal as an energy source led to the growing environmental and health problems. But comprehensive knowledge of coal quality parameters may help to reduce some of these problems. The Canakkale-Can coalfield is located in the western part of Turkey, whose reserves are estimated at 69.3 billion tons, mainly used in the industry in the neighboring areas, specifically for the Can Thermal Power Plant. The aim of this study is to determine the coal quality parameters and examine the origin and distributions of potentially toxic trace elements in lignite which may produce environmental and health hazards in the area. The coal samples were collected from different parts of the coalfield in Can. Proximate and ultimate analyses, sulfur form analyses, X-ray powder diffraction （XRD）, inductively coupled plasma-mass spectrometry （ICP-MS）, and scanning electron microscopy （SEM） were performed on those samples to determine the geochemical profile of hazardous elements.     

Analysis of the effect of geology, soil properties, and land use on groundwater quality using multivariate statistical and GIS methods

The regional survey of groundwater used as a small water supply system was performed to know the effect of geology, soil properties and land use on groundwater quality at Nonsan City, Korea. A total of 126 groundwater samples were collected and analyzed at the study area. The multivariate statistical methods, principal components analysis and discriminant analysis, and GIS technique were used for the quantitative interpretation of groundwater quality. The study area is mainly composed of Precambrian gneiss, Jurassic granite, and Cretaceous volcanics, and metasedimentary rocks of the Ogcheon zone. The land use was grouped as paddy, upland, grassland, resident, point source, industrial area, and water system. The soil properties were classified as 4 major groups, Entisols, Alfisols, Inceptisols, and Ultisols, by the degree of development, and reclassified as 11 subgroups. The modified and simplified geologic map, soil map, and land use map were made by using ARCGIS soft-ware. The area of geology, soil property, and land use affecting the groundwater quality for each well were also calculated by ARCGIS soft-ware to acquire the quantitative parameters for multivariate statistical analysis. The monitoring results of groundwater in the study area showed that 13%-21% of the groundwater samples exceeded the portable water guideline and the main causes were turbidity, bacteria, arsenic and nitrate-N. The spatial distribution of each component showed the close relationship between groundwater quality and geology reflecting the topography, land use.     

Effect of polypropylene fibre and lime admixture on engineering properties of clayey soil

In order to reduce the brittleness of soil stabilized by lime only, a recent study of a newly proposed mixture of polypropylene fibre and lime for ground improvement is described and reported in the paper. To investigate and understand the influence of the mixture of polypropylene fibre and lime on the engineering properties of a clayey soil, nine groups of treated soil specimens were prepared and tested at three different percentages of fibre content (i.e. 0.05%, 0.15%, 0.25% by weight of the parent soil) and three different percentages of lime (i.e. 2%, 5%, 8% by weight of the parent soil). These treated specimens were subjected to unconfined compression, direct shear, swelling and shrinkage tests. Through scanning electron microscopy (SEM) analysis of the specimens after shearing, the improving mechanisms of polypropylene fibre and lime in the soil were discussed and the observed test results were explained. It was found that fibre content, lime content and curing duration had significant influence on the engineering properties of the fibre–lime treated soil. An increase in lime content resulted in an initial increase followed by a slight decrease in unconfined compressive strength, cohesion and angle of internal friction of the clayey soil. On the other hand, an increase in lime content led to a reduction of swelling and shrinkage potential. However, an increase in fibre content caused an increase in strength and shrinkage potential but brought on the reduction of swelling potential. An increase in curing duration improved the unconfined compressive strength and shear strength parameters of the stabilized soil significantly. Based on the SEM analysis, it was found that the presence of fibre contributed to physical interaction between fibre and soil whereas the use of lime produced chemical reaction between lime and soil and changed soil fabric significantly.     

Analysis of a rigid footing lying on three-layered soil using the finite difference method

A numerical procedure is described for the analysis of the vertical deformation and the stress distribution of the strip footings on layered soil media. Three layers of soil with different stiffness are considered with the middle soil layer the thinnest and most stiff layer. The soil media is discretized and using the theory of elasticity, the governing differential equations are obtained in terms of vertical and horizontal displacements. These equations along with appropriate boundary and continuity conditions are solved by using the finite difference method. The vertical and horizontal displacements, strains and stresses are found at various nodes in the soil media. Parametric studies are carried out to study the effect of the placement depth of the middle soil layer, the relative ratios of the moduli of deformation of the soil layers on the vertical displacement of the footing and the vertical stress distribution. These studies reveal that the middle thin but very stiff layer acts like a plate and redistributes the stresses on the lower soft soil layer uniformly. The displacement on the top and bottom of the middle soil layer is almost the same showing that the compression of the middle layer is negligible as it is very stiff.     

Modeling of Beams on Reinforced Granular Beds

The paper describes a mechanical model for estimating the flexural response of a strip footing, supporting a column (imposing a concentrated load), resting on a compacted granular bed overlying a reinforcement layer for example, geogrids, geomats etc. below which lies a loose soil deposit. The footing is idealized as a beam and the reinforcing element is assumed to have finite bending stiffness and negligible frictional resistance. The upper and lower soil layers are idealized by a series of linear and discrete springs (Winkler springs) of different stiffness values. To find the response of such a model the governing differential equations have been derived and expressed in a nondimensional form. A closed form analytical solution of the same has been obtained subjected to appropriate boundary conditions. Using the present approach the resulting solution for a degenerated case of a long beam is found to be identical to the same of Hetenyi (1946, Beams on elastic foundations, University of Michigan press, Ann Arbor, MI). Parametric studies reveal that the ratio of flexural rigidity of upper and lower beam and the ratio of stiffness of the upper and lower soil layers affect significantly the response of the foundation.     

Soil quality changes in land degradation as indicated by soil chemical, biochemical and microbiological properties in a karst area of southwest Guizhou, China

Not only the nutritional status and biological activity but also the soil ecological functioning or soil health has been impacted profoundly by land degradation in the karst area of southwest China where the karst ecosystems are generally considered as extremely vulnerable to land degradation under intensified land-use changes. The objectives of this study are to elucidate the changes in overall soil quality by a holistic approach of soil nutritional, biological activity, and soil health indicators in the karst area as impacted by intense cultivation and vegetation degradation. Topsoil samples were collected on selected eco-tesserae in a sequence of land degradation in a karst area of southwest Guizhou in 2004. The soil nutrient pools of organic carbon (C_org), extractable extracellular carbon (C_ext), total soil nitrogen (N_t), alkali-hydrolyzable nitrogen (N_ah), total phosphorus (P_t), available phosphorus (P_a) were analyzed by wet soil chemistry. The soil biological properties were studied by means of measurements of microbial biomass carbon (both by fumigation–extraction, FE-C_mic, and by calculation from substrate-incubation respiration, SIR-C_mic) of respiration [respiration without addition of substrates, basal respiration (BR), and potential respiration (PR) with substrate-incubation] and of soil enzyme activities (invertase, urease, and alkaline phosphatase). Soil health status was assessed by simple indices of C_mic/C_org and BR/C_mic in conjunction with bacterial community structures determined by polymerase chain reaction and denaturing gradient gel electrophoresis. While the nutritional pool parameters, such as C_org and C_ext, described basically the changes in soil life-supporting capacity with cultivation interference and vegetation declined, those parameters of biological activity such as FE-C_mic, SIR, and SIR-C_mic as well as bacterial community structures measured by molecular method evidenced well the changes in soil functioning for ecosystem health with the land degradation.     

Will the river Irtysh survive the year 2030? Impact of long-term unsuitable land use and water management of the upper stretch of the river catchment (North Kazakhstan)

The Irtysh river basin all the way from river spring in China across Kazakhstan as far as the Russian part of Siberia is among the most ecologically endangered and affected regions on our planet. The study provides a summary of the historical reasons for anthropological interventions in this area, which began with the construction of plants of the military—industrial complexes in the forties of the last century during World War II. These plants have a major share in extreme high concentrations of heavy metals in surface as well in groundwaters locally. The Semipalatinsk nuclear polygon plays a specific role as a source of contamination of local waters. The release of top secret data enabled us to gain knowledge about serious problems related to high radioactivity of groundwaters, which should spread uncontrollably through a system of secondary fissures activated by nuclear blasts. Another serious problem in this region is the quantitative aspect of contamination. Model simulations of water balance indicate that large industrial development in the spring area in China and continuously increasing water consumption in Kazakhstan may lead to desiccation of the lower stretch of this large river in Siberia during the summer months of 2030.     

全数字摄影测量系统DEM生产的质量控制

目前,数字高程模型(DEM)在理论研究和实践应用方面都有了很大的进展,已在测绘、地质、农业、工程、建筑、军事、导航等多个领域得到了广泛应用,因此高效快捷地生产高精度的DEM是十分必要和迫切的。全数字摄影测量系统DEM生产方案是解决这一问题的有效途径,文章针对该系统的特点,提出了加强质量控制的策略和方法,并阐述了对一些实践问题的解决。     

区域大气环境质量灰关联评价方法探讨

针对区域中大气环境质量的特点，采用对数主成分分析方法获得各环境指标的权重及各监测点的横向排名，再用适宜的灰度关联方法进行了评价。整个过程在MATLAB6．5中实现，计算简便易行，与传统的综合指数法相比较，其评价结果更符合客观实际。