地球化学样品分析质量管理系统

利用VFP6．0强大的数据计算和管理功能，设计了对地质调查样品分析数据的实验室质量管理系统。该系统不仅可以同时管理多个图幅样品的数据，还可以自动实现样品编码、内检样品按指定比例随机生成、一级和二级标样质量汇总、内检合格率和报出率计算、二级标样质量监控图绘制以及按选定格式进行分析数据和内检数据的导入和导出，可以根据用户的需要输出美观的表格。该系统适用于不同比例尺化探数据的实验室质量管理。     

盐城市地下水水质控制因素分析

本文采用主因素分析的方法,结合盐城市近几年地下水水质监测资料,对盐城市淡水区和微咸水区地下水水质各监测组分按不同的分类标准分成全体组和离子组进行分析,确定地下水水质控制因素,并将计算结果与盐城市水文地质条件相结合,分析了计算得出的研究区地下水水质控制因素的形成原因及特点。最后根据分析结果制定一套适用于盐城市第Ⅲ承压含水层水质监测方案。为提高治理水环境的综合效益提供了科学依据。     

区域土壤环境地球化学研究——异常成因判别·环境质量·污染程度评价的思路与方法

从概念内涵和应用目标出发,认为土壤环境地球化学质量评价应该分为质量现状和污染程度两个方面.在此基础上探讨了区域地球化学资料在土壤环境现状质量评价、异常成因识别、污染元素累积速率和土壤污染程度评价研究的基本思路和方法.     

汪清7.2级深震地下流体动态异常探析

2002年6月29日汪清7．2级深震前，吉林省地下流体观测网部分井孔观测到一组从趋势到短期前兆异常。本文阐述这些异常出现的特征和时空演化过程。认为异常出现的时间与震中距密切相关，其空间展布具有迁移性，中期异常由外围向震中收缩，其速率很小，进入短期阶段，岩石处于失稳、临失稳状态，水位异常由震中向外围发散，速率迅速加大。同时发现了异常盲区即深震的震中区，它对预测深震中有非常实际的意义，同时对研究板块运动、地球动力学过程也有一定的参考价值。     

俯冲-增生型造山带增生楔流体研究进展

俯冲－增生型造山带弧前增生楔流体的特点为：盐度低、氯化物含量异常低，并含有丰富的CO2和CH4。流体以扩散式或沿断层带渠道式活动；泥火山、张裂隙充填脉、碳酸盐壳、深海生物群是流体活动的直接体现；流体活动影响着增生楔的内部结构和构造样式；增生楔中流体活动特征的研究对研究造山带的地质演化及矿床成因具有重要意义。     

青海省3次强震前地下流体短临异常的对比分析

通过对发生于1999～2000年间库玛中东段地区3次5级以上地震前地下流体短临异常的分析对比，得出了该地区地下流体短临异常的时空强演化特征。     

Fluid mixing as the mechanism of formation of the Dajing Cu-Sn-Ag-Pb-Zn ore deposit,Inner Mongolia ——Fluid inclusion and stable isotope evidence

Since the 1990s, interest in the magmatic fluids and their relation to mineralization has been re-aroused[1—6]. Studies on stable isotopes of low-sulfidation deposits commonly show the predominance of meteoric water[7]. Paradoxically, the evidence for me…     

Focused ion beam technique and transmission electron microscope studies of microdiamonds from the Saxonian Erzgebirge, Germany

A focused ion beam of Ga ions is a relatively new technique that has been developed for microelectronic industries. Now researchers of the Earth sciences find it to be a promising tool for studying various geological materials. Using the FIB technique and an FEI Strata DB 235 dual beam system, we have successfully prepared several electron-transparent foils, which crossed μm-sized diamonds included in host minerals such as zircon and garnet from quartzofeldspathic rocks of the Saxonian Erzgebirge, Germany. Scanning and transmission electron microscopy applied to these foils revealed that the diamonds contain crystalline nanometric inclusions. These inclusions consist of minerals of known stoichiometries such as SiO₂ and Al₂SiO₅, whereas others are characterized by different combinations of Si, K, P, Ti, and Fe in the presence of oxygen (stoichiometries are not clear at this stage of research). One suite of inclusions is assumed to be represented by archerite, KH₂PO₄, which is known to be stable at pressures of 4–22 GPa, and one nanocrystal containing Pb, oxygen and carbon is interpreted to be Pb_xO_y or PbCO₃. Along with solid crystalline inclusions, the diamonds contain cavities filled by liquid/gas that escaped during sample preparation. These are associated with dislocations of diamond growth. Our data are consistent with the concept of diamond crystallization from a COH-rich multicomponent supercritical fluid and suggest that the composition of such a fluid is more consistent with a local crustal source rather than that of a mantle origin.     

Petrography and uplift history of the Quaternary Takidani Granodiorite: could it have hosted a supercritical (HDR) geothermal reservoir?

The Quaternary Takidani Granodiorite (Japan Alps) is analogous to the type of deep-seated (3–5 km deep) intrusive-hosted fracture network system that might support (supercritical) hot dry/wet rock (HDR/HWR) energy extraction. The I-type Takidani Granodiorite comprises: porphyritic granodiorite, porphyritic granite, biotite-hornblende granodiorite, hornblende-biotite granodiorite, biotite-hornblende granite and biotite granite facies; the intrusion has a reverse chemical zonation, characterized by >70 wt% SiO₂ at its inferred margin and <67 wt% SiO₂ at the core. Fluid inclusion evidence indicates that fractured Takidani Granodiorite at one time hosted a liquid-dominated, convective hydrothermal system, with <380°C, low-salinity reservoir fluids at hydrostatic (mesothermal) pressure conditions. ‘Healed’ microfractures also trapped >600°C, hypersaline (35 wt% NaCl_eq) fluids of magmatic origin, with inferred minimum pressures of formation being 600–750 bar, which corresponds to fluid entrapment at 2.4–3.0 km depth. Al-in-hornblende geobarometry indicates that hornblende crystallization occurred at about 1.45 Ma (7.7–9.4 km depth) in the (marginal) eastern Takidani Granodiorite, but later (at 1.25 Ma) and shallower (6.5–7.0 km) near the core of the intrusion. The average rate of uplift across the Takidani Granodiorite from the time of hornblende crystallization has been 5.1–5.9 mm/yr (although uplift was about 7.5 mm/yr prior to 1.2 Ma), which is faster than average uplift rates in the Japan Alps (3 mm/yr during the last 2 million years). A temperature–depth–time window, when the Takidani Granodiorite had potential to host an HDR system, would have been when the internal temperature of the intrusive was cooling from 500°C to 400°C. Taking into account the initial (7.5 mm/yr) rate of uplift and effects of erosion, an optimal temperature–time–depth window is proposed: for 500°C at 1.54–1.57 Ma and 5.2±0.9 km (drilling) depth; and 400°C at 1.36–1.38 Ma and 3.3±0.8 km (drilling) depth, which is within the capabilities of modern drilling technologies, and similar to measured temperature–depth profiles in other active hydrothermal systems (e.g. at Kakkonda, Japan).     

Exploration and discovery in Yellowstone Lake: results from high-resolution sonar imaging, seismic reflection profiling, and submersible studies

‘No portion of the American continent is perhaps so rich in wonders as the Yellow Stone’ (F.V. Hayden, September 2, 1874)Discoveries from multi-beam sonar mapping and seismic reflection surveys of the northern, central, and West Thumb basins of Yellowstone Lake provide new insight into the extent of post-collapse volcanism and active hydrothermal processes occurring in a large lake environment above a large magma chamber. Yellowstone Lake has an irregular bottom covered with dozens of features directly related to hydrothermal, tectonic, volcanic, and sedimentary processes. Detailed bathymetric, seismic reflection, and magnetic evidence reveals that rhyolitic lava flows underlie much of Yellowstone Lake and exert fundamental control on lake bathymetry and localization of hydrothermal activity. Many previously unknown features have been identified and include over 250 hydrothermal vents, several very large (>500 m diameter) hydrothermal explosion craters, many small hydrothermal vent craters (1–200 m diameter), domed lacustrine sediments related to hydrothermal activity, elongate fissures cutting post-glacial sediments, siliceous hydrothermal spire structures, sublacustrine landslide deposits, submerged former shorelines, and a recently active graben. Sampling and observations with a submersible remotely operated vehicle confirm and extend our understanding of the identified features. Faults, fissures, hydrothermally inflated domal structures, hydrothermal explosion craters, and sublacustrine landslides constitute potentially significant geologic hazards. Toxic elements derived from hydrothermal processes also may significantly affect the Yellowstone ecosystem.