Consumption,growth and survival of the endemic stream shredder Limnephilus atlanticus (Trichoptera,Limnephilidae) fed with distinct leaf species

Oceanic freshwater communities tend to be species poor but rich in endemism due to their physical isolation. The ecology of endemic freshwater species is, however, poorly known. This study assessed allometric relationships, feeding preferences, growth and survival of larvae of the endemic stream insect Limnephilus atlanticus (Trichoptera, Limnephilidae) exposed to four leaf species differing in their physical and chemical characteristics (Ilex perado, Morella faya, Alnus glutinosa and Clethra arborea), in laboratory trials. All regression models used to estimate L. atlanticus dry mass from body and case dimensions and wet mass were significant, but wet mass and body length were the best predictors. Limnephilus atlanticus consumed all the four leaf species offered, but when given a choice, shredders significantly preferred A. glutinosa over the other three leaf species. Relative larval growth rate was significantly higher when L. atlanticus fed on A. glutinosa and I. perado leaves in comparison with the other leaf species. Survival of 95% was found when individuals fed on A. glutinosa leaves while it decreased to 75% when they fed on the other leaf species. Our results suggest that L. atlanticus can be an active shredder and that it exhibits the same basic patterns of food exploitation as its continental counterparts. The lack of an effect of shredders on litter decomposition in Azorean streams revealed by previous studies may thus be due to low densities or to a preference for food resources other than the low quality native litter species.     

西部地区富油煤开发利用潜力分析和技术体系构想

【目的】富油煤是集煤、油气属性为一体的宝贵煤炭资源,催化热解是实现其绿色低碳开发的重要途径。然而,高效可回收催化剂的研发仍面临着极大的挑战。【方法】以HZSM-5@SiO₂@MgFe₂O₄ (HSMF)为原料,采用水热法与碱改性制备具有多级孔结构的HZSM-5@SiO₂@MgFe₂O₄ (mHSMF),再通过沉淀法制备铈改性mHSMF (5-CeO₂/mHSMF);并利用固定床反应器考察了5-CeO₂/mHSMF对神府富油煤热解产物的调控作用及其抗积炭性能。【结果和结论】结果表明,CeO₂改性有助于在HSMF表面形成微−介孔多级孔道结构;在5-CeO₂/mHSMF催化剂上,650 ℃、N₂气氛、反应1 h的条件下,神府富油煤焦油产率达到13.38%,是格金试验焦油产率的176%;相较于原煤热解,催化热解得到的焦油中脂肪烃类及苯类化合物含量分别增加了3.04%和3.07%,煤气中H₂和CH₄含量提高了10.49%;经CeO₂改性后,催化剂的抗积炭性能增幅达86.1%,积炭量仅为11.60 mg/g,且积炭趋于稳定的石墨化结构。5-CeO₂/mHSMF对神府富油煤催化热解产物的分布及组成具有明显调控作用,并表现出良好的抗积炭效果和磁性可回收性能。

     

初论紫金山铜金矿床超临界成矿流体系统

紫金山矿床是我国东南沿海发现的大型金铜矿床.在分析超临界成矿流体系统形成的区域地质背景和研究成矿物理化学条件的基础上,探讨了超临界成矿流体系统形成的动力学条件,提出该系统的成矿机理:与燕山晚期酸性火山-侵入岩浆有关的金铜矿床是在上地幔隆起、张性或向张性过渡背景下形成的,酸性岩浆经熔体-流体分离作用形成的岩浆热液与大气降水混合,经水-岩作用等复杂的输运和化学反应耦合过程的动力学产物.     

综合分析技术在微细粒浸染型金矿金赋存状态研究中的应用

采用化学组分分析、物相分析、粒度筛析、X射线面扫描分析、矿物分离分析并结合数理统计分析等综合分析技术对微细粒浸染型金矿进行工艺矿物学研究,较为快速、准确地查明该金精矿金的赋存状态.几种分析方法互为补充,结果吻合.     

矢量数字地图数据质量的综合评估

研究和确定了矢量数字地图数据的质量评估因子和评估标准,介绍了利用模糊综合评估方法进行质量评估的过程和做法,并给出了实例.     

老挝爬奔金矿围岩蚀变特征及其与金矿化的关系

爬奔金矿位于琅勃拉邦岛弧带中段西侧,矿体赋存于石炭-下二叠统厚层-巨厚层灰岩中,受NW-NNW向断裂构造控制,是少硫化物型中-低温热液矿床。野外调研及室内研究结果表明:爬奔金矿的围岩蚀变以中-低温蚀变矿物组合为特征,主要有硅化、褐铁矿化、菱铁矿化、方解石化,随着岩石蚀变强度的增加,Au与Si、Fe同步增加,而Ca减少。蚀变受断裂构造控制,分带明显,不同的矿化蚀变对应不同的矿石类型。多种蚀变叠加部位是成矿有利地段。“红化”蚀变和“褪色”蚀变是区内独特的围岩蚀变现象,找矿指示作用明显,结合构造、地层、化探异常等其他条件,可作为矿区外围及邻区的找矿标志。     

断裂构造控矿的数学和力学分析：以山东新城——河西金矿区为例

以山东新城－河西金矿区为例,通过新城、河西和候西矿床容矿断裂的形态、断裂活动、构造因素、构造应力场和变形场的数学、力学半定量及定量分析,探计断裂构造控矿规律以及成矿的力学机理。提出了金矿成矿受主断裂面形态、次级小断裂、节理的发育强度,断裂构造的力学特征、变形强度等控制。矿体多位于波状起伏的主断裂面凸峰的下盘、凹谷的上盘。矿化强度与次级断裂、节理的发育强度正相关。断裂构造带和次级构造裂隙带是内应力低     

黑龙江绥芬河市北寒葱河河谷地下水水质保护及开发利用建议

为掌握绥芬河市北寒葱河河谷地下水的水质状况,向地方提供合理的水资源开发建议,本研究以地质、水文地质调查、水样采集等手段为基础,利用模糊综合评价法和层级阶梯法分别进行了研究区地下水水质和污染状况评价,应用物探测试、抽水试验等原位测试技术论证了区域地下水的富水性。以上工作基本查明了研究区地下水的水量和水质现状.认为研究区裂隙承压水一般为Ⅰ~Ⅲ类水质,污染等级为未污染水,水质状况较好,污染程度较低,宜于饮用;中生代构造破碎带涌水量可达350m3·d-1以上,建议地方政府应重点围绕构造破碎带开展物探找水,并开展地下水源地分区保护规划.     

Petrogenetic and Metallogenetic Background of the Dajing Cu–Sn–Ag–Pb–Zn Ore Deposit, Inner Mongolia, and Characteristics of the Mineralizing Fluid

Abstract: The Dajing Cu–Sn–Ag–Pb–Zn ore deposit, Inner Mongolia of China, is a fissure‐filling hydrothermal ore deposit that occurs within the Upper Permian Linxi group. No magmatic pluton and volcanic rocks outcrop on the surface of the deposit. Most of ore veins show clear‐cut boundary with country rocks. Wallrock alterations that include silicification, carbonation, chlori–tization, and sericitization are generally weak and occur in the close vicinity of ore veins. Mineralization is divided into three stages: (1) cassiterite–arsenopyrite–quartz stage, (2) sulfide stage, and (3) Pb–Zn–Ag–carbonate stage. These mineralization stages have distinct ranges of homogenization temperatures, 290–350C for Stage 1, 260–320C for Stage 2, and 150–250C for Stage 3. However, salinities for Stages 1, 2, and 3 overlap and range between 2.2 and 10.4 wt % NaCl equivalent. The dD values relative to V‐SMOW of inclusion water from quartz are lower than –88% and centered at –100 to –130%. The δ³⁴S values relative to CDT of sulfide ore minerals and δ¹³C values relative to PDB of carbonate gangue minerals, vary from –0.3 to +2.6%, and from –7.0 to –2.9%, respectively. Integrated isotopic data point to two major contributions to the mineralizing fluid that include a dominant meteoric‐derived water and the other from hypogene magma for sulfur and carbon species. Analyses of inclusion gas and liquid compositions are performed. The H₂O and CO₂ are the two most abundant gaseous components, whereas SO₄^2‐ and Cl^‐, and Na⁺, Ca²⁺, and K⁺ are the major anions and cations, respectively. A linear trend is shown on the gaseous H₂O versus CO₂ plot. Phase separation is excluded as cause for the trend on the basis of isotope data and fluid inclusion microthermometry. In addition, a weak wallrock alteration does not support fluid‐rock interaction as an efficient mechanism. Hence, the linear H₂O–CO₂ trend is interpreted in terms of absorption or dilution of CO₂–dominant magmatic vapor by meteoric‐derived water. Cooling effects resulting from dilution may have caused precipitation of ore minerals. Major and trace element compositions of regional granites show a high‐K calc–alkaline characteristics and an arc–affinity. Lead isotopic compositions of galena samples from the Dajing deposit exhibit elevated U/Pb and Th/Pb ratios. These characteristics indicate a common source of supra subduction zone mantle wedge for regional granites and metals from the Dajing deposit.     

Magnetite geochemistry of the Longqiao and Tieshan Fe–(Cu) deposits in the Middle-Lower Yangtze River Belt: Implications for deposit type and ore genesis

Magnetite is a common mineral in many ore deposits and their host rocks, and contains a wide range of trace elements (e.g., Ti, V, Mg, Cr, Mn, Ca, Al, Ni, Ga, Sn) that can be used for deposit type fingerprinting. In this study, we present new magnetite geochemical data for the Longqiao Fe deposit (Luzong ore district) and Tieshan Fe–(Cu) deposit (Edong ore district), which are important magmatic-hydrothermal deposits in eastern China.Textural features, mineral assemblages and paragenesis of the Longqiao and Tieshan ore samples have suggested the presence of two main mineralization periods (sedimentary and hydrothermal) at Longqiao, among which the hydrothermal period comprises four stages (skarn, magnetite, sulfide and carbonate); whilst the Tieshan Fe–(Cu) deposit comprises four mineralization stages (skarn, magnetite, quartz-sulfide and carbonate).Magnetite from the Longqiao and Tieshan deposits has different geochemistry, and can be clearly discriminated by the Sn vs. Ga, Ni vs. Cr, Ga vs. Al, Ni vs. Al, V vs. Ti, and Al vs. Mg diagrams. Such difference may be applied to distinguish other typical skarn (Tieshan) and multi-origin hydrothermal (Longqiao) deposits in the MLYRB. The fluid–rock interactions, influence of the co-crystallizing minerals and other physicochemical parameters, such as temperature and fO₂, may have altogether controlled the magnetite trace element contents of both deposits. The Tieshan deposit may have had higher degree of fO₂, but lower fluid–rock interactions and ore-forming temperature than the Longqiao deposit. The TiO₂–Al₂O₃–(MgO + MnO) and (Ca + Al + Mn) vs. (Ti + V) magnetite discrimination diagrams show that the Longqiao Fe deposit has both sedimentary and hydrothermal features, whereas the Tieshan Fe–(Cu) deposit is skarn-type and was likely formed via hydrothermal metasomatism, consistent with the ore characteristics observed.