试谈超大型铀矿床分类及找矿问题

随着核电事业在我国的发展，对铀资源保证的要求将越来越迫切。这里所指的铀资源保证应包含数量和效益两层意思，而超大型铀矿床则能同时满足对这两方面的要求。因此，在我国寻找超大型铀矿床是一项刻不容缓的任务。为了确立找矿目标，作者尝试提出了一种将矿床产出地质特征和经济效益相结合的超大型铀矿床分类方案，共划分出３大类１３个亚类。结合我国情况，作者认为在７个有远景的类型中，有３个（即Ⅰ－２、Ⅱ－１和Ⅲ－５）在我国最有突破的希望，特别是Ⅲ－５。最后，作者参考国外超大型铀矿床的找矿经验，对于加强我国对超大型铀矿床的探索提出了四点具体意见。     

壤中氧测量在找矿中的意义

随着科学技术的发展，壤中氧测量已具备应用于野外找矿的基本条件。本文通过野外壤中氧测量的找矿实例，对方法的理论依据、技术基础做了简要的阐述。介绍了壤中Ｏ２测量与壤中Ｒｎ，ＣＯ２测量配合在找矿中的成功应用，并认为：以积分形式采集数据的壤中氧方法具有方便、稳定的特点。     

高温超高压下Ni40Mn30Fe30与叶蜡石反应的研究

本文对Ｎｉ４０Ｍｎ３０Ｆｅ３０合金与在不同焙烧温度下得到的含水叶蜡，在高温超高压下的反应进行了实验研究，温度测至１４２０℃，压是至５．５ＧＰａ，研究了该反应的物质－化学机制，以及反应速率与温度，压力，含水量等参数的关系，对高压下物质迁移运动的固有特征进行了探讨。     

山东牟平邓格庄金矿的地球化学特征及成因

邓格庄大型石英脉型金矿，分布于燕山期昆嵛山花岗岩体内金牛山断裂带次级断裂中。成矿年龄１１８×１０６ａ，它比容矿岩体冷凝至３５０℃时还晚１２×１０６ａ。成矿深度小于１ｋｍ（约０．７５ｋｍ），而容矿岩体的定位深度大于１３ｋｍ，它们的定位深度差大于１２ｋｍ。成矿流体来自地壳深部，通过水－岩反应又从容矿岩体中萃取一部分金。故此金矿不是传统意义的岩浆期后热液矿床     

多宝山矿田的地面波谱研究及其在铜矿预测中的应用

根据矿田内岩矿地质波谱与ＴＭ图象亮度的线性相关关系，论述了多宝山铜矿田内矿床的地面波谱特征，地空相关模型及ＴＭ数据的地空相关分析方法，在此基础上讨论了其在铜矿预测中的应用效果。     

山东文登金矿成矿动力学研究

本文通过古应力估算，流体包体研究，应变测量以及矿化蚀变规律研究，探讨了山东文登金矿的动力作用与金成矿的主要关系，认为构造动力作用的金成矿的主要原因，韧性剪切作用向韧－脆性变形作用的过渡过程是金成矿的必要条件之一。     

Important Geological Factors Controlling the Formation of Gold Deposits in East China

The major gold deposits in east China are characterized by their occurrence in pre-Cambrian host metamorphic rocks,restriction in some specific stratigraphic-structural terranes,tendentious localization in ductile or ductile-brittle shear zones,association with the syntexis type granitoids,and significant remobilization,superimposition and enrichment by the later stage Mesozoic tectono-magmatic activities.     

Upper Mississippi embayment shallow seismic velocities measured in situ

Vertical seismic compressional- and shear-wave (P-and S-wave) profiles were collected from three shallow boreholes in sediment of the upper Mississippi embayment. The site of the 60-m hole at Shelby Forest, Tennessee, is on bluffs forming the eastern edge of the Mississippi alluvial plain. The bluffs are composed of Pleistocene loess, Pliocene-Pleistocene alluvial clay and sand deposits, and Tertiary deltaic-marine sediment. The 36-m hole at Marked Tree, Arkansas, and the 27-m hole at Risco, Missouri, are in Holocene Mississippi river floodplain sand, silt, and gravel deposits. At each site, impulsive P- and S-waves were generated by man-made sources at the surface while a three-component geophone was locked downhole at 0.91-m intervals.

Consistent with their very similar geology, the two floodplain locations have nearly identical S-wave velocity (V_S) profiles. The lowest V_S values are about 130 m s⁻¹, and the highest values are about 300 m s⁻¹ at these sites. The shear-wave velocity profile at Shelby Forest is very similar within the Pleistocene loess (12 m thick); in deeper, older material, V_S exceeds 400 m s⁻¹.

At Marked Tree, and at Risco, the compressional-wave velocity (V_P) values above the water table are as low as about 230 m s⁻¹, and rise to about 1.9 km s⁻¹ below the water table. At Shelby Forest, V_P values in the unsaturated loess are as low as 302 m s⁻¹. V_P values below the water table are about 1.8 km s⁻¹. For the two floodplain sites, the V_P/V_S ratio increases rapidly across the water table depth. For the Shelby Forest site, the largest increase in the V_P/V_S ratio occurs at 20-m depth, the boundary between the Pliocene-Pleistocene clay and sand deposits and the Eocene shallow-marine clay and silt deposits.

Until recently, seismic velocity data for the embayment basin came from eartquake studies, crustal-scale seismic refraction and reflection profiles, sonic logs, and from analysis of dispersed earthquake surface waves. Since 1991, seismic data for shallow sediment obtained from reflection, refraction, crosshole and downhole techniques have been obtained for sites at the northern end of the embayment basin. The present borehole data, however, are measured from sites representative of large areas in the Mississippi embayment. Therefore, they fill a gap in information needed for modeling the response of the embayment to destructive seismic shaking.     

江西永平铜矿金属矿物化学成份及矿物包体特征

永平铜矿黄铁矿、黄铜矿的化学成份特征以及矿物测温和石英包体成份分析特征表明成矿经历了一个较低温度阶段，但所反映的后期成矿作用的改造特征也非常明显，特征是闪锌矿，其化学成份具明显的后期改造成矿特征，是岩浆热作用的产物。黄铁矿的同生成矿较为明显，闪锌矿的后期改造成矿特征更为明显，而黄铜矿具有明显的沉积改造特征。     

460铀矿床成矿构造背景

４６０矿床为一个大型斑岩型铀－钼矿床。晚侏罗世近东西向分布的火山岩系为铀元素的预富集打下了基础。白垩纪流纹斑岩为其主要的成矿母岩，可能为ＮＥ向展布。早第三纪末期的热液活动使铀进一步富集成矿，在区域应力场作用下，矿体呈ＮＷ走向。晚第三纪的表生淋积作用，使矿体上部近地表处形成次生富集带。基于上述研究，可以进一步明确此类矿床的找矿方向。