资源勘查图件计算机辅助编绘系统的结构分析与开发策略研究

如何站在信息系统的高度来进行资源图件计算机辅助编绘系统的快速开发，是资源信息系统领域计算机应用的一个重要研究课题。在结构分析的基础上，将资源图件计算机辅助编绘系统划分为图形数据库，应用图形系统和基础图形系统3个基本部分。对于复杂资源图件的计算机辅助编绘，需要地矿点源信息系统的支持。在基础图形系统上进行专业编绘程序的二次开发是高效建立图件编绘系统的最佳途径，并需注意GIS集成应用，三维可视化，人工智能和参数化设计等方法的运用，而系统平台开发是复杂应用的高级阶段。该思想可应用于煤及油气勘探，工程开发，矿区管理及区域地质等诸多领域的软件开发中。     

基于GM(1,1)优化模型的岩石边坡变形预报

岩石边坡系统是一典型灰色系统，其变形发展过程可以用灰色预测模型完成。尽管传统GM（1，1）模型预测有很多成功的实例，但是也存在一些预测偏差过大的情况，必须对其进行优化。逐步迭代法GM（1，1）模型不仅收敛速度快，而且与原始数据库序列的凹凸性保护一致。利用自编的计算程序对马步坎边坡预测测点G1沉降和开裂进行预测分析，结果表明逐步迭代法GM（1，1）优化模型计算精度较传统GM（1，1）模型和背景构造法GM（1，1）优化模型高，较好地反映了岩石边坡的变形趋势。     

平落坝储层有机包裹体特征与气藏形成过程研究

通过储集层成岩作用与有机包裹体的研究认为,研究区储集层有机包裹体主要通过交代和重结晶作用而形成,有各种相态形式,主要分布在石英颗粒内溶蚀缝或孔隙中,构造裂缝中基本未见有机包裹体。上三叠统储集层包裹体丰度明显高于侏罗系沙溪庙组。香二气藏砂岩有机包裹体均一温度主峰在 10 0～ 110℃;沙溪庙气藏砂岩有机包裹体均一温度主峰在 90～ 10 0℃。香二气藏形成时间早,经历了印支期少量注入到印支期末-喜山早期大量注入,再到喜山晚期调整、部分注入的过程。沙溪庙气藏天然气注入则主要发生于喜山运动期。     

原油在储层介质中的加水裂解生气模拟实验

采用高温高压热模拟实验方法,开展了原油在砂岩和火成岩储层介质中的加水裂解生气模拟实验研究.结果表明,原油开始大量裂解的温度是400℃,随模拟温度增加,甲烷相对含量增大,乙烷以上重烃气尤其是丙烷相对含量减小.其中砂岩的油水混合物裂解生气主要发生在450～500℃之间,生气窗范围小,对应的烃气产率高,火成岩的油水混合物裂解生气主要发生在450～600℃之间,生气窗范围大,对应的烃气产率小.模拟烃气的组分碳同位素分馏显著,随模拟温度增加呈变重趋势.在裂解生气过程中,水解加氢和催化作用对烃气的组成、产率和碳同位素分布有重要影响。     

Structural damage detection using the optimal weights of the approximating artificial neural networks

This work presents a novel neural network‐based approach to detect structural damage. The proposed approach comprises two steps. The first step, system identification, involves using neural system identification networks (NSINs) to identify the undamaged and damaged states of a structural system. The partial derivatives of the outputs with respect to the inputs of the NSIN, which identifies the system in a certain undamaged or damaged state, have a negligible variation with different system errors. This loosely defined unique property enables these partial derivatives to quantitatively indicate system damage from the model parameters. The second step, structural damage detection, involves using the neural damage detection network (NDDN) to detect the location and extent of the structural damage. The input to the NDDN is taken as the aforementioned partial derivatives of NSIN, and the output of the NDDN identifies the damage level for each member in the structure. Moreover, SDOF and MDOF examples are presented to demonstrate the feasibility of using the proposed method for damage detection of linear structures. Copyright © 2001 John Wiley & Sons, Ltd.     

Comparative response analysis of conventional and innovative seismic protection strategies

The paper presents a numerical investigation aimed at evaluating the improvements achievable through devices for passive seismic protection of buildings based on the use of shape memory alloys (SMA) in place of conventional steel or rubber devices. To get some generality in the results, different resisting reinforced concrete plane frames were analysed, either protected or not. ‘New’ and ‘existing’ buildings were considered depending on whether seismic provisions are adopted in the building design or not. Base isolation and energy dissipation were equally addressed for both conventional and innovative SMA‐based devices. Fragility analyses were performed using specific damage measures to account for comparisons among different damage types; the results were then used to estimate quantitatively the effectiveness of the various protection systems. More specifically, the assessment involved a direct comparison of the damage reduction provided by each protection system with respect to the severe degradation experienced by the corresponding non‐protected frame. Structural damage, non‐structural damage and damage to contents were used on purpose and included in a subsequent phase of cost analysis to evaluate the expected gains also in terms of economic benefits and life loss prevention. The results indicate that base isolation, when applicable, provides higher degrees of safety than energy dissipation does; moreover, the use of SMA‐based devices generally brings about better performances, also in consideration of the reduced functional and maintenance requirements. Copyright © 2002 John Wiley & Sons, Ltd.     

Multi‐objective optimal design of FLC driven hybrid mass damper for seismically excited structures

Structural vibration control using active or passive control strategy is a viable technology for enhancing structural functionality and safety against natural hazards such as strong earthquakes and high wind gusts. Both the active and passive control systems have their limitations. The passive control system has limited capability to control the structural response whereas the active control system depends on external power. The power requirement for active control of civil engineering structures is usually quite high. Thus, a hybrid control system is a viable solution to alleviate some of the limitations. In this paper a multi‐objective optimal design of a hybrid control system for seismically excited building structures has been proposed. A tuned mass damper (TMD) and an active mass driver (AMD) have been used as the passive and active control components of the hybrid control system, respectively. A fuzzy logic controller (FLC) has been used to drive the AMD as the FLC has inherent robustness and ability to handle the non‐linearities and uncertainties. The genetic algorithm has been used for the optimization of the control system. Peak acceleration and displacement responses non‐dimensionalized with respect to the uncontrolled peak acceleration and displacement responses, respectively, have been used as the two objectives of the multi‐objective optimization problem. The proposed design approach for an optimum hybrid mass damper (HMD) system, driven by FLC has been demonstrated with the help of a numerical example. It is shown that the optimum values of the design parameters of the hybrid control system can be determined without specifying the modes to be controlled. The proposed FLC driven HMD has been found to be very effective for vibration control of seismically excited buildings in comparison with the available results for the same example structure but with a different optimal absorber. Copyright © 2002 John Wiley & Sons, Ltd.     

全谱直读等离子发射光谱法直接测定天然矿泉水中的SO2-4

采用全谱直读等离子发射光谱(ICP-AES)直接测定天然矿泉水中SO2-4的方法在优化工作条件下SO42-的测定下限为0.09mgL-1,方法简便,快速,适用于批量生产.     

海拉尔盆地含油气系统

海拉尔盆地为中－新生代的断陷－坳陷型盆地，其发育演化主要经历了地壳隆起、断陷、坳陷、萎缩四个阶段。根据对成藏要素分析，确定出以凹陷为单元的三类含油气系统，各含油气系统都有各自的形成和分布规律。按其空间展布，又可划分为同期并列式、同期交叉式、异期叠合式三种组合形式。这些形式的有效组合，构成了海拉尔盆地内有利的油气聚集带。     

非常规综合物化探油气预测研究

非常规综合物化探方法油气预测研究中存在的主要问题为：缺乏系统与综合的基础性理论研究，异常形成的机理还不十分清楚，在参数的优化组合及异常的求取上尚有诸多不足。针对后一种情况，选择松辽盆地东岭构造作为实验区进行了有益的探索。选取低能吸附烃、放射性测氡及土壤热释光三类参数进行了优化组合，分别计算了综合指标MAE与MAC及组合熵，然后对各值采用泛克里格法求取异常，取得了良好的效果。下一步研究应从异常形成的机理入手，建立三维非常规综合物化探油气预测模式，以提高油气预测成功率。