东准噶尔纸房地区晚石炭世巴塔玛依内山组陆相火山-沉积体系特征

东准噶尔巴塔玛依内山组是典型陆相火山．沉积体系(盆地)，主体由基性及中酸性火山熔岩组成，火山碎屑岩及火山碎屑沉积岩较少，通过对纸房地区晚石炭世巴塔玛依内山组陆相火山岩的岩石化学、地球化学特征进行系统研究，认为它属于造山期后固结初期，新陆壳裂谷向高原火山岩演化的同岩浆源、同沉积盆地、同火山作用的钙碱系列双峰式火山岩．     

激光剥蚀等离子体质谱分析中激光剥蚀参数对信号响应的影响

探讨了激光剥蚀等离子体质谱固体微区分析中激光剥蚀参数对元素分析信号灵敏度及稳定性的影响。这些参数包括激光功率、脉冲频率、剥蚀孔经、散焦距离、剥蚀方式等。讨论了优化的激光剥蚀等离子体质谱信号采集及数据处理方式。在全质量范围内选用具有代表性的元素作为研究对象,建立了激光剥蚀的一般性特征规律和266nm紫外激光系统的最佳操作条件。在选定的激光剥蚀参数下,大多数被测元素的检出限为22.8~457ng/g,能够满足固体微区分析的要求。     

滑坡及危岩(崩塌)防治工程措施选择与工程设置

滑坡和危岩（崩塌）治理工程措施较多，措施组合可变性大，每种工程措施都有其相应的应用条件，不宜性、适宜性和最佳配置组合。治理工程措施选择应充分考虑治理工程功能性的具体要求、在不同工况条件下的安全性及耐久性、工期要求和投资的经济性以及后期维护的要求、工程岩土体性质及其蓄水后的变化、场地条件、施工技术条件、地方材料资源等具体制约因素以及环境保护的要求。在三峡水库区二期地质灾害防治工程国家级验收总结的基础上，对滑坡与危岩（崩塌）常用防治工程措施（排水、削方减载、回填压脚、抗滑桩、重力式抗滑挡墙、预应力锚索、格构锚固、拦石墙等）的工程适用条件、工程设置及不宜性进行了详细的分析，并提出工程设置应考虑及注意的问题。     

绿片岩三轴流变力学特性的研究(II):模型分析

首先,基于在岩石全自动流变伺服仪上得到的绿片岩三轴流变试验曲线,采用五元件线性粘弹性模型对表现为粘弹性流变特性的曲线进行了辨识,获得了绿片岩的粘弹性流变参数;然后,提出了一个新的非线性粘性元件,并将其与塑性体并联起来,得到一个新的非线性粘塑性体(NVPB),该体能充分反映岩石的加速流变特性:同时,将NVPB模型与五元件粘弹性模型串联起来,建立了一个新的岩石七元件非线性粘弹塑性流变模型。采用绿片岩加速流变全过程曲线,对提出的岩石七元件非线性粘弹塑性流变模型进行了辨识,得到了岩石七元件非线性粘弹塑性流变模型的材料参数。流变模型与试验结果的比较,显示了所建模型的正确性与合理性。     

Geometry and accuracy of reflecting points in bistatic satellite altimetry

The analysis of the time and space distribution of specular (reflecting) points in bistatic altimetry between GPS and CHAMP satellites or SAC-C (taken as examples) is extended from Wagner and Klokočník (2003 J. Geod 77: 128–138). We demonstrate a significantly higher number and density of reflecting points in bistatic altimetry in comparison with traditional monostatic altimetry. After an outline of our older accuracy assessment for the vertical position of the reflecting point, we add a new independent derivation and compare both approaches. We account for orbit errors of both the transmitters (GPS) and receiver (CHAMP) satellites, and the measurement (delay) error. We found that the accuracy of the vertical position of the reflecting point decreases only slowly with increasing off-nadir angle and that the orbit errors must be accounted for if decimeter and better accuracy is required. In this paper, we do not study errors such as state of the ocean, technical parameters of the receiving system, and atmospheric corrections.     

Outlier detection algorithms and their performance in GOCE gravity field processing

The satellite missions CHAMP, GRACE, and GOCE mark the beginning of a new era in gravity field determination and modeling. They provide unique models of the global stationary gravity field and its variation in time. Due to inevitable measurement errors, sophisticated pre-processing steps have to be applied before further use of the satellite measurements. In the framework of the GOCE mission, this includes outlier detection, absolute calibration and validation of the SGG (satellite gravity gradiometry) measurements, and removal of temporal effects. In general, outliers are defined as observations that appear to be inconsistent with the remainder of the data set. One goal is to evaluate the effect of additive, innovative and bulk outliers on the estimates of the spherical harmonic coefficients. It can be shown that even a small number of undetected outliers (<0.2 of all data points) can have an adverse effect on the coefficient estimates. Consequently, concepts for the identification and removal of outliers have to be developed. Novel outlier detection algorithms are derived and statistical methods are presented that may be used for this purpose. The methods aim at high outlier identification rates as well as small failure rates. A combined algorithm, based on wavelets and a statistical method, shows best performance with an identification rate of about 99%. To further reduce the influence of undetected outliers, an outlier detection algorithm is implemented inside the gravity field solver (the Quick-Look Gravity Field Analysis tool was used). This results in spherical harmonic coefficient estimates that are of similar quality to those obtained without outliers in the input data.     

World-wide synthetic tide parameters for gravity and vertical and horizontal displacements

The response of the Earth’s crust to the direct effect of lunisolar gravitational forcing is known as the body tide. The body tide is superimposed by surface-loading forces due to the pressure of the periodically varying ocean tide acting on the Earth, called ocean tide loading (OTL). Both body tide and OTL can be decomposed into components of the same frequency known as tidal parameters. However, OTL is more complicated than body tides because of the dynamic effects of the ocean. Estimating OTL requires a model of the ocean tides and knowledge of the elastic properties of the solid Earth. Thus, synthetic tide parameters (amplitude factors and phase leads) have been developed here on a world-wide grid for gravity and positional displacements. The body tide contributions were added to the oceanic contribution to provide the Earth tide response. The accuracy and reliability of the synthetic tidal parameters have been estimated by comparing observed gravity and vertical-displacement tide parameters with those interpolated from our synthetic model, which shows good agreement. Tests also indicate that the synthetic tide parameters provide realistic gravimetric and displacements for practical use in tidal prediction.     

近百年中国东部夏季降水的时空变率

利用中国东部25°N以北28个站1880-1999年夏季季降水序列,用旋转复经验正交函数（RCEOF）方法,研究了中国东部地区百年干湿的时空演变规律。结果表明,夏季降水空间变率大值区依次为:长江中下游地区、淮河流域、江南、华北、西南及东北。除西南外的5个关键区大体上反映了从6月到8月夏季雨带自南向北椎进所滞留的地区。旋转空间位相分布揭示了长江中下游地区、江南、东北的旱涝异常主要表现为驻波振动特征;而淮河流域、华北、西南地区显示出降水异常信号具有部分的行波特征。尤其第4空间模显示出旱涝异常信号从东北南部可沿着黄淮下游传到长江下游地区。对于近百年中国东部地区夏季于湿变化,长江中下游地区、淮河流域、华北及东北四个地区都存在20-25年时间尺度的周期振荡;长江中下游地区及华北地区都存在准60年时间尺度的振荡周期;东北地区主要表现出36年时间尺度的振荡周期;淮河流域存在明显的70-80年时间尺度的振荡周期;华北地区存在的11年时间尺度的振荡周期恰好与太阳黑子活动的11年周期相一致。在年代际时间尺度（包括次年代际时间尺度）上,长江中下游、淮河流域及华北地区的夏季降水的变化与太阳活动有显著的正相关。     

油田污水中Fe2+,S2-,DO及pH值对HPAM-酚醛CDG成胶性能影响的研究

在对河南油田双河矿区油田污水进行全分析的基础上，研究了污水中Fe^2 ,S^2-，溶解氧（DO）及污水的pH值对有机交联体系聚丙烯酰胺（HPAM）－酚醛胶态分散凝胶（CDG）成胶性能的影响。研究结果表明，Fe^2 ,S^2－，DO及污水的pH值对HPAM－酚醛体系的成胶性能都有影响当ρ（Fe^2 )=1.6mg/L,ρ（S^2-)=0.1mg/L,ρ（DO）=1.6mg/L，HPAM－酚醛体系就不能成胶；随着污水pH值的增大，CDG强度变弱。     

基于GM(1,1)优化模型的岩石边坡变形预报

岩石边坡系统是一典型灰色系统，其变形发展过程可以用灰色预测模型完成。尽管传统GM（1，1）模型预测有很多成功的实例，但是也存在一些预测偏差过大的情况，必须对其进行优化。逐步迭代法GM（1，1）模型不仅收敛速度快，而且与原始数据库序列的凹凸性保护一致。利用自编的计算程序对马步坎边坡预测测点G1沉降和开裂进行预测分析，结果表明逐步迭代法GM（1，1）优化模型计算精度较传统GM（1，1）模型和背景构造法GM（1，1）优化模型高，较好地反映了岩石边坡的变形趋势。