Low-order stabilized finite element for the full Biot formulation in soil mechanics at finite strain

This article presents a novel finite element formulation for the Biot equation using low-order elements. Additionally, an extra degree of freedom is introduced to treat the volumetric locking steaming from the effective response of the medium; its balance equation is also stabilized. The accuracy of the proposed formulation is demonstrated by means of numerical analyses.     

Analytical solutions for advective–dispersive solute transport in double‐layered finite porous media

Analytical solutions for advection and dispersion of a conservative solute in a one‐dimensional double‐layered finite porous media are presented. The solutions are applicable to five scenarios that have various combinations of fixed concentration, fixed flux and zero concentration gradient conditions at the inlet and outlet boundaries that provide a wide number of options. Arbitrary initial solute concentration distributions throughout the media can be considered via explicit formulations or numerical integration. The analytical solutions presented have been verified against numerical solutions from a finite‐element‐based approach and an existing closed‐form solution for double‐layered media with an excellent correlation being found in both cases. A practical application pertaining to advective transport induced by consolidation of underlying sediment layers on contaminant movement within a capped contaminated sediment system is presented. Comparison of the calculated concentrations and fluxes with alternative approaches clearly illustrates the need to consider advection processes. Consideration of the different features of contaminant transport due to varying pore‐water velocity fields in primary consolidation and secondary consolidation stages is achieved via the use of non‐uniform initial concentration distributions within the proposed analytical solutions. Copyright © 2010 John Wiley & Sons, Ltd.     

南极低温降解菌Shewanella sp. NJ49羟化酶分离纯化及最适产酶条件研究

羟化酶是细菌降解烷烃的关键酶,本文以南极低温降解菌Shewanella sp.NJ49为研究对象,通过硫酸铵沉淀、超滤浓缩及葡聚糖凝胶Sephadex G-75柱层析方法,分离纯化NJ49的羟化酶,获得了单一羟化酶组分,研究了温度、p H、表面活性剂和盐度等环境因素对NJ49羟化酶酶活活性影响。结果表明,羟化酶组分由α、β、γ三个亚基组成,分子质量分别为56,45和36 k D。NJ49最适产酶条件为:温度15℃、p H7.2、盐度55;不同类型表面活性剂对酶的活性影响效应不一,两性离子表面活性剂、阳离子表面活性剂、非离子表面活性剂对酶活没有作用,阴离子表面活性剂+非离子表面活性剂混和剂和阳离子表面活性剂+非离子表面活性剂混和剂能提高羟化酶的活性。     

Cutting of Phragmites australis as a lake restoration technique: Productivity calculation and nutrient removal in Wuliangsuhai Lake, northern China

Reed is one of the most frequent and dominant species in wetlands all over the world, with common reed (Phragmites australis (Cav.) Trin. ex Steud.) as the most widely distributed species. In many wetlands, P. australis plays a highly ambivalent role. On the one hand, in many wetlands it purifies wastewater, provides habitat for numerous species, and is a potentially valuable raw material, while on the other hand it is an invasive species which expands aggressively, prevents fishing, blocks ditches and waterways, and builds monospecies stands. This paper uses the eutrophic reed-swamp of Wuliangsuhai Lake in Inner Mongolia, northern China, as a case to present the multiple benefits of regular reed cutting. The reed area and aboveground biomass production are calculated based on field data. Combined with data about water and reed nutrient content, the impact of reed cutting on the lake nutrient budget (N and P) is investigated. Currently, at this lake around 100,000 tons of reed are harvested in winter annually, removing 16% and 8% of the total nitrogen and phosphorus influx, respectively. Harvesting all available winter reed could increase the nutrient removal rates to 48% and 24%, respectively. We also consider the effects of summer harvesting, in which reed biomass removal could overcompensate for the nutrient influx but could potentially reduce reed regrowth.     

Defining the Potential of Nanoscale Re‐Os Isotope Systematics Using Atom Probe Microscopy

Atom probe microscopy (APM) is a relatively new in situ tool for measuring isotope fractions from nanoscale volumes (< 0.01 μm³). We calculate the theoretical detectable difference of an isotope ratio measurement result from APM using counting statistics of a hypothetical data set to be ± 4δ or 0.4% (2s). However, challenges associated with APM measurements (e.g., peak ranging, hydride formation and isobaric interferences), result in larger uncertainties if not properly accounted for. We evaluate these factors for Re‐Os isotope ratio measurements by comparing APM and negative thermal ionisation mass spectrometry (N‐TIMS) measurement results of pure Os, pure Re, and two synthetic Re‐Os‐bearing alloys from Schwander et al. (2015, Meteoritics and Planetary Science, 50, 893) [the original metal alloy (HSE) and alloys produced by heating HSE within silicate liquid (SYN)]. From this, we propose a current best practice for APM Re‐Os isotope ratio measurements. Using this refined approach, mean APM and N‐TIMS ¹⁸⁷Os/¹⁸⁹Os measurement results agree within 0.05% and 2s (pure Os), 0.6–2% and 2s (SYN) and 5–10% (HSE). The good agreement of N‐TIMS and APM ¹⁸⁷Os/¹⁸⁹Os measurements confirms that APM can extract robust isotope ratios. Therefore, this approach permits nanoscale isotope measurements of Os‐bearing alloys using the Re‐Os geochronometer that could not be measured by conventional measurement principles.     

Modelling tropical cyclone risks for present and future climate change scenarios using geospatial techniques

Tropical cyclones and their devastating impacts are of great concern to coastal communities globally. An appropriate approach integrating climate change scenarios at local scales is essential for producing detailed risk models to support cyclone mitigation measures. This study developed a simple cyclone risk-modelling approach under present and future climate change scenarios using geospatial techniques at local scales, and tested using a case study in Sarankhola Upazila from coastal Bangladesh. Linear storm-surge models were developed up to 100-year return periods. A local sea level rise scenario of 0.34?m for the year 2050 was integrated with surge models to assess the climate change impact. The resultant storm-surge models were used in the risk-modelling procedures. The developed risk models successfully identified the spatial extent and levels of risk that match with actual extent and levels within an acceptable limit of deviation. The result showed that cyclone risk areas increased with the increase of return period. The study also revealed that climate change scenario intensified the cyclone risk area by 5–10% in every return period. The findings indicate this approach has the potential to model cyclone risk in other similar coastal environments for developing mitigation plans and strategies.     

煤田绳索取心钻探应建立新的行业钻探体系

煤炭仍然是世界主要能源资料,煤田地质勘探必将向深部发展,绳索取心钻探技术是深部钻探优质高效的首选方法。目前煤田绳索取心钻探技术未能全面采用,存在若干不适应煤田地层的技术问题,但都能采取措施解决。煤田地质钻探钻遇地层普遍存在水敏现象,导致泥浆含砂、含泥量过高使性能变坏。煤田绳索取心钻探还存在与“水敏”、“砂害”伴随着的泵压高、泥浆流速快、冲刷严重、冲洗液动力学效应负作用大等问题,采用非煤地质勘探标准钻具（柱）,强度低,能力弱,难以抵抗负面作用。为此,不仅需要优选适应地层抑制其水敏性的泥浆配比,更重要的是解决除砂除泥问题。同时要打破旧有思维,建立新体系,扩大钻孔直径,增大配套间隙,提升装备动力,用大功率去克服问题。     

冲-洪积平原1:5万区域地质调查技术方法探索

首都地区规划建设工作主要分布于平原松散地层之上,第四纪地质研究显得尤为重要。依托近几年来在北京地区开展的平原覆盖区1:5万区域地质调查和活动断裂专项调查项目成果,系统总结了平原区第四纪区域地质调查与评价的主要工作手段和技术方法,及其在解决第四纪基础地质问题及生态环境中所起的作用。通过平原区区域地质调查工作,可查明第四纪精细地质结构、含水层分布特征,精确厘定活动断裂位置及其活动时限,探讨自然环境演化序列与人类活动关系等,为城市规划、重大工程建设和应急水源地水资源合理开采提供基础地学数据。研究成果对首都城市减灾防灾、生态环境演变研究具有重要地学支撑作用。