不同地形条件地面同步光谱定标场对比研究

利用美国ASD公司的FieldSpec Pro FR地面波谱仪,选择5°视场角探头和135cm探头距测试地物高度,开展0°、5°、10°、15°、20°等五种不同地形坡度明、暗地物自然定标场地面波谱测试。通过对比研究不同地形坡度具代表性、能真实反映被测试目标平均自然性的各波谱测试点波谱曲线特征,得出0°、5°地形坡度获取的波谱曲线连续、平滑,信噪比高,没有混入大气水气吸收、仪器噪声等因素导致的剧烈波动、跳跃现象或尖锐锯齿状噪声,波谱特征明显,吸收峰最小值位置清晰可辨,各波谱测试点波谱曲线变化幅度小,整体反射率值变化小,Fe~(2+)、Fe~(3+)、Al-OH、Mg-OH、CO_3~(2-)等分子基团与离子波谱的诊断性波谱特征位置清晰可辨。因此0°和5°坡度地形条件获取的地面同步自然场光谱定标波谱曲线,可以满足航空高光谱遥感数据的大气校正、光谱重建和空、地回归分析等所需的地面波谱数据要求。     

Investigation of a longfin inshore squid's swimming characteristics and an underwater locomotion during acceleration

In the present study, locomotion of a real longfin inshore squid (Doryteuthis pealeii) was numerically investigated. Geometry of a real squid was obtained using computed tomography (CT) images. In addition to a two-dimensional axisymmetric squid model, a modified squid model with no cavities around her head and an ellipse shaped model were generated with a fineness ratio (the ratio of body length to maximum body diameter) of 7.56. These numerical models were exposed to an acceleration with two different velocity programs. Added mass and basset forces on bodies were calculated during acceleration of the squid models starting from rest. Pressure and viscous drag forces were also calculated due to pressure variation along the squid models and friction on the surface of the models. The effect of a nozzle diameter on jet velocities and propulsive efficiency at all bodies were evaluated when time dependent velocity profiles (from 0 to 10 m/s in 0.5 and 1 s time durations) were set for the inlet of computational domain. The modified squid model required least thrust force during acceleration phase of time dependent velocity profile compared to the other models while the 0.02 m nozzle diameter provided largest propulsive efficiency for all models.     

Compression limit state of HVAC submarine cables

An industry accepted standard does not currently exist for determination of compression limits in a subsea cable. This has resulted in most manufacturers specifying that subsea cables are not permitted to be axially loaded in compression.Additionally industry guidance does not exist regarding the consequences of inducing compression forces within subsea cables and the resulting effect on cable integrity. Industry recommended practice and guidance also does not have any information regarding experimental test arrangements to determine allowable compression levels within a subsea cable. This lack of modelling/testing guidance along with manufacturer recommendations of zero compressive loads within subsea cables results in overly conservative and restrictive design parameters for subsea cable installation and use.Due to the complex interaction within a subsea cable structure, such as contact interaction and friction between cable strands, theoretical modelling has been unable to provide reliable stress predictions and therefore an experimental testing regime is required if compression limits within the cable are to be appropriately determined. This paper describes combined axial and bending test arrangements that can be used as a guideline for determination of allowable compression limits for subsea cables.     

Origin of the Breno and Esino dolomites in the western Southern Alps (Italy): Implications for a volcanic influence

The Esino Limestone of the western Southern Alps represents a differentiated Ladinian-Lower Carnian (?) carbonate platform comprised of margin, slope and peritidal inner platform facies up to 1000 m thick. A major regional subaerial exposure event lead to coverage by another peritidal Lower Carnian carbonate platform (Breno Formation). Multiphase dolomitization affected the carbonate sediments. Petrographic examinations identified at least three main generations of dolomites (D1, D2, and D3) that occur as both replacement and fracture-filling cements. These phases have crystal-size ranges of 3–35 μm (dolomicrite D1), 40–600 μm (eu-to subhedral crystals D2), and 200 μm to 5 mm (cavity- and fracture-filling anhedral to subhedral saddle dolomite D3), respectively.The fabric retentive near-micritic grain size coupled with low mean Sr concentration (76 ± 37 ppm) and estimated δ¹⁸O of the parent dolomitizing fluids of D1 suggest formation in shallow burial setting at temperature ∼ 45–50 °C with possible contributions from volcanic-related fluids (basinal fluids circulated in volcaniclastics or related to volcanic activity), which is consistent with its abnormally high Fe (4438 ± 4393 ppm) and Mn (1219 ± 1418 ppm) contents. The larger crystal sizes, homogenization temperatures (D2, 108 ± 9 °C; D3, 111 ± 14 °C) of primary two-phase fluid inclusions, and calculated salinity estimates (D2, 23 ± 2 eq wt% NaCl; D3, 20 ± 4 eq wt% NaCl) of D2 and D3 suggest that they formed at later stages under mid-to deeper burial settings at higher temperatures from dolomitizing fluids of higher salinity, which is supported by higher estimated δ¹⁸O values of their parent dolomitizing fluids. This is also consistent with their high Fe (4462 ± 4888 ppm; and 1091 ± 1183 ppm, respectively) and Mn (556 ± 289 ppm and 1091 ± 1183 ppm) contents, and low Sr concentrations (53 ± 31 ppm and 57 ± 24 ppm, respectively).The similarity in shale-normalized (SN) REE patterns and Ce (Ce/Ce*)_SN and La (Pr/Pr*)_SN anomalies of the investigated carbonates support the genetic relationship between the dolomite generations and their calcite precursor. Positive Eu anomalies, coupled with fluid-inclusion gas ratios (N₂/Ar, CO₂/CH₄, Ar/He), high F⁻ concentration, high F/Cl and high Cl/Br molar ratios suggest an origin from diagenetic fluids circulated through volcanic rocks, which is consistent with the co-occurrence of volcaniclastic lenses in the investigated sequence.     

南海中尺度涡强度的季节和年际变化分析

为了研究南海中尺度涡强度的季节和年际变化规律,利用Matlab提取50 a(1958~2007年)简单海洋资料同化(Simple Ocean Data Assimilation,SODA)月平均数据集中流场和海表面高度场数据,应用一个涡旋自动探测算法对南海中尺度涡初始生成位置进行分析,并分析了海表面高度异常均方根值的季节变化和年际变化。结果表明:50 a里南海中尺度涡主要分布在吕宋岛西北海域、吕宋岛西南海域和越南以东广大海域,秋、冬季中尺度涡能量较高,春季中尺度涡最弱,中尺度涡强度高值区年际变化明显。从季节变化上看,海面高度异常均方根春、夏季最小,秋冬季最大;从年际变化上看,与同时期Nino3指数有显著负相关,周期大约为3 a。     

Optimal routing for waste collection: a case study in Singapore

ABSTRACT

To collect and dispose growing amounts of municipal solid waste (MSW) changed to be a hot topic along with the rapid urbanization in past decades. Cities are more and more dependent on the incineration instead of landfilling due to the cost-efficiency and environmental concerns. Considering the limited number of incineration plants and complicated situation of transportation in both spatial and temporal dimensions in different cities, the optimal routing for waste collection turns to be meaningful research topic. In this research, the ant colony optimization (ACO)-based multi-objective routing model coupled with min-max model and Dijkstra’s algorithm is proposed to address the question of which route to take from these waste-generating points to the target incineration plant(s) considering travel time, accident probability (black spots), and population exposure, so as to support the routing decision-making. The model is successfully implemented in Singapore and the effectiveness of the model has also been justified. Besides, few limitations of this research have also been discussed, some of which would also be the future directions of our research, especially the design and integration of a web-based routing decision-making support system.     

基于WACCM+DART的临近空间SABER和MLS臭氧观测同化试验研究

本研究在WACCM+DART（Whole Atmosphere Community Climate Model,Data Assimilation Research Test-Bed）临近空间资料同化预报系统中加入SABER（Sounding of the Atmosphere using Broadband Emission Radiometry）和MLS（Microwave Limb Sounder）臭氧观测同化接口,并以2016年2月一次平流层爆发性增温（SSW）过程为模拟个例进行了SABER和MLS臭氧观测同化试验,得出以下结论:同化SABER和MLS臭氧体积浓度观测得出的WACCM+DART臭氧分析场能够较真实反映SSW期间北极上空平流层臭氧廓线随时间的演变特征,且与ERA5（Fifth Generation of ECMWF Reanalyses）再分析资料描述的臭氧变化特征具有很好的一致性;基于SABER和MLS臭氧观测的WACCM臭氧6 h预报检验表明同化臭氧观测对臭氧分析和预报误差的改善效果主要体现在南半球高纬平流层和北半球中高纬平流层中上层-中间层底部;基于ERA5再分析资料的WACCM+DART分析场检验表明同化SABER和MLS臭氧体积浓度资料可在提高北半球高纬地区上平流层-中间层底部臭氧场分析质量的同时减小该地区上平流层-中间层底部温度场和中间层底部纬向风场的分析误差;基于MLS臭氧资料的臭氧中期预报检验表明相对控制试验同化SABER和MLS臭氧体积浓度资料能更好改善0~5 d下平流层和中间层底部臭氧的预报效果。     

高分辨率模式雷达回波预报能力分析

利用2018年7—8月GRAPES_3 km、东北短临(WRFRUC)高分辨率模式综合雷达回波预报数据和辽宁省SWAN雷达组合反射率(MCR)实况,基于邻域法FSS评分指数,分析模式在台风北上和副热带高压边缘暴雨过程中的雷达回波预报能力。结果表明:两家模式在不同降水过程中对小阈值雷达回波有较好的预报技巧,随着回波量级增大,模式预报FSS逐渐减小,雷达回波55 dBz时,FSS甚至为0。当邻域半径是3时,35 dBz以下的回波预报中GRAPES模式在台风北上暴雨中的预报技巧低于副热带高压边缘,35 dBz则相反。WRFRUC模式始终表现为台风北上暴雨中预报较好。当邻域半径9时,WRFRUC模式在台风暴雨中的FSS评分高于GRAPES模式,GRAPES模式在副热带高压暴雨中的FSS评分始终高于WRFRUC模式。GRAPES和WRFRUC模式的最大FSS评分技巧均出现在邻域半径是11时,分别为0.239和0.195。GRAPES模式中FSS评分在12 h逐小时预报中前3个时次较强,WRFRUC模式则表现为中间时次强,两头弱。     

GE VCT-高图像质量和低剂量的和谐

在本文中讨论了实现图像质量和X射线剂量的和谐和同一的重要性,介绍了GELightSpeedVCT在硬件,软件和临床应用上降低病人剂量的方法。VCT在实现各向同性高分辨率的同时努力提高X射线的有效利用率,降低病人剂量,真正实现了高图像质量和低剂量的和谐。     

硬X射线成像仪量能器测试系统的设计与实现

硬X射线成像仪(Hard X-ray Imager, HXI)是先进天基太阳天文台(Advanced Space-based Solar Observatory, ASO-S)的3大载荷之一, 其中量能器作为其重要组成部分, 承担着观测30--200keV能段的太阳硬X射线的任务. 在卫星发射之前, 需要开展大量的测试工作, 以确保HXI量能器的各项功能和性能满足设计需求. HXI量能器通道数众多, 内含99个溴化镧探测器, 分别由8块相同的前端电子学板控制. 除了对各个通道的性能进行测试外, 地检系统还需模拟量能器在轨面对不同太阳活动时的运行情况, 对量能器进行全面完备的测试. 此外, 地检系统还需足够稳定, 能满足量能器在单机测试、环境试验、热真空与振动等多个不同测试项目的长时间测试需求. 为此, 设计了地检板与上位机软件, 结合放射源、直流电源、高压模块等组成一套HXI量能器的地检系统, 对8块前端电子学板实现同步配置与管理, 能高效完成指令发送与数据接收, 满足量能器最大数据输出带宽400Mbps的需求. 利用该系统, 在地面完成了HXI量能器的功能、性能验证, 获得了量能器的线性、死时间、能量分辨率等各项性能指标, 为HXI量能器的在轨高性能运行提供了保障.