基坑开挖与土钉支护的数值模拟

运用FLAC程序对深基坑土钉墙支护设计进行了数值模拟,分析了边壁土体的变形大小和土钉应力分布,并与现场实测结果对比,得出基坑顶的水平位移值与实测值相差不大,并对差值进行了分析。在应力方面,改善了土体内应力集中的现象,从而制约了土体的变形。剪应力在支护结构和坡角处有集中现象,在坡角处较为严重。     

Stability of arsenopyrite and As(III) in low-temperature acidic solutions

Arsenopyrite is one of the most important pri-mary arsenic mineral. In the Eh-pH diagram of the As-O2-S-H2O system, if the total arsenic concentration (TAs) is taken to be 0.75 mg/L, the total sulfur con-centration, 32 mg/L, the temperature, 25℃and the pressure, one atmosphere pressure for the discrimina-tion of arsenic species, it may be found that under hy-pergene conditions, arsenopyrite is a moderately stable mineral. Only in the strongly alkaline and reducing environment can arsenopy…     

基于电场理论的主动防雷系统的初步设想

针对目前使用的传统雷电防护技术存在的问题，通过分析雷电原理和雷电触发机制，利用电场理论来设计一套主动防雷系统，即实现保护对象所在空间大气处于被激放电状态，并利用闪电将大气激活为自激放电状态。介绍了主动防雷系统的原理，并对其核心的“引而不发”理论进行阐述，在此基础上设计出主动防雷系统的模型。具体说明了构成主动防雷系统的阻塞系统、疏导系统和电源系统的构造和特征以及它们之间的关系。计算得到主动防雷系统所需的电场强度E=0．69kV／m。最后指出了存在问题与发展方向，在结论中总结了主动防雷系统的特点及其关键。     

浅谈计算机信息系统的雷电防护

通过对计算机信息系统的检测及其避雷装置的安装实践,总结了一些操作要领和技巧,并结合工作中的体会对新的防雷技术进行了探讨。     

内蒙古武川-四子王旗地区地下水中的NO-3污染

三氮对人体的危害已引起人们的关注，NO3^--N是三氮的主体。本文分析了武川一四子王旗地区NO3^-的污染现状及其在水平和垂向上的分布特征和规律，研究了污染原因和过程，提出了相应的防治对策。     

Mountain Protection Forests against Natural Hazards and Risks: New French Developments by Integrating Forests in Risk Zoning

Forests can play a very significant role in protection against natural hazards and risks in mountain lands, especially against erosion and rockfalls. This paper first assesses knowledge concerning the capacity of forests to control natural hazards, with emphasis placed on forest location in catchments or slopes. Zoning aspects are then presented; based on the use of GIS, they allow determining priorities for forestry operations (cuts and biological engineering), in view to setting up an 'optimal management' of mountain forest ecosystems. Finally, an explanation is given of how the results of research are used for the management and planning of mountain ecosystems, illustrated by an example of researcher-practitioner transfer in France. Zoning, prevention, display and regular aspects are developed. On the basis of the experience and knowledge presented here, recommendations are proposed to better take into account the role of mountain forests in the control of natural hazards and risks. It is necessary to have an adapted legislative and economic framework, define priority forest intervention zones and determine an adapted sylviculture.     

Centrifuge modelling of the influence of crustal fabrics on the development of transfer zones: insights into the mechanics of continental rifting architecture

Centrifuge analogue experiments are used to model the reactivation of pre-existing crustal fabrics during extension. The models reproduced a weakness zone in the lower crust whose geometry was varied in order to investigate its role in controlling the architecture of rift segments and related transfer zones. The typical rift system geometry was characterised by two offset rift segments connected by a major transfer zone in which boundary faults were oblique to the extension vector and displayed a significant transcurrent component of movement. The transfer zone was also characterised by cross-basin faults with both trend and strike-slip component of movement opposite to that displayed by the master faults. Typically, different structural patterns were obtained by changing the offset angle φ between the rift segments, supporting that the structural pattern at transfer zones is strongly influenced by the orientation of pre-existing discontinuities with respect to the stretching vector. In the models, the aspect ratio (ratio of length vs. width) of the transfer zone shows a positive correlation with the offset angle (i.e., the more the inherited fabric is parallel to the extension direction, the longer and narrower the transfer zones). In case of staircase offset of the rift segments (φ=90°), the structural pattern was characterised by two isolated rift depressions linked by a narrow transfer zone in which border faults with alternating polarity overlapped. Prominent rise of the ductile lower crust was also observed at the transfer zone. Many of these geometrical features display striking similarities with natural rift systems. The results of the current experiments provide useful insights into the mechanics of continental rift architecture, supporting that rift propagation, width and along-axis segmentation may be strongly controlled by the reactivation of pre-existing pervasive crustal fabrics.     

Are isolated stable rigid clasts in shear zones equivalent to voids?

Particles in shear enclose important information about a rock's past and can potentially be used to decipher the kinematic history and mechanical behavior of a certain outcrop or region. Isolated rigid clasts in shear zones often exhibit systematic inclinations with respect to the shear-plane at small angles, tending towards the instantaneous stretching direction of the shear zone. This shape preferred orientation cannot be easily explained by any of the analytical theories used in geology. It was recently recognized that a weak mantle surrounding the clast or a slipping clast–matrix interface might be responsible for the development of the observed inclinations. Physical considerations lead us to conjecture that such mantled, rigid clasts can be effectively treated as voids that are not allowed to change their shape. The resulting equivalent void conjecture agrees well with numerical and field data and has the following important geological implications. (i) Clasts in shear zones can have stable positions in simple shear without the requirement of an additional pure shear component. (ii) The stable orientation can be approached either syn- or antithetically; hence, the clast can rotate against the applied shear sense. (iii) The strain needed to develop a strong shape preferred orientation is small (γ≈1) and therefore evaluations based on other theories may overestimate strain by orders of magnitude. (iv) The reconstruction of far-field shear flow conditions and kinematic vorticity analysis must be modified to incorporate these new findings.     

Structural controls on gold mineralisation and the nature of related fluids of the Paiol gold deposit, Almas Greenstone Belt, Brazil

Chemical analyses suggest that the metavolcanic rocks of the Almas Greenstone Belt (AGB), Tocantins State, Brazil have a continental affinity, possibly related to a continental rift environment. They were metamorphosed to amphibolite facies during a regional tectono-metamorphic event (D_n), retrogressed to greenschist facies assemblages and then hydrothermally altered within dextral strike–slip shear zones (D_n+1). Fracture sets related to D_n+2 intersect S_n+1.The Paiol Gold Mine is one of several mineralised zones within metabasic and meta-intermediate rocks of the AGB. It exploits shoots of sulphide–Au–quartz mineralisation that occupy dilational zones approximately perpendicular to an elongation lineation (L_n+1) within mylonitic foliation S_n+1 (S_n+1=S within the S–C fabric). The dilational zones probably formed due to dextral displacement on sinistrally en echelon C surfaces. Minor amounts of gold may have been introduced or remobilised during D_n+2.Coexisting primary and pseudosecondary fluid inclusions in mineralised quartz veins from ore shoots comprise a high-salinity three-phase type (Type II) and a lower salinity two-phase type (Type I). Homogenisation temperatures for Type II inclusions range from 200 to 410 °C and Type I from 90 to 320 °C. The inclusions and their temperature ranges are believed to reflect heat exchange and some mixing between the two fluid types under relatively constant ambient temperatures, but variable (though broadly declining) fluid temperatures. This took place late in D_n+1 in conjunction with greenschist facies retrogression and localised hydrothermally induced metasomatism.     

探矿工程(岩土钻掘工程)技术与可持续发展

可持续发展是我们时代的主题，已被世界各国人民作为发展本国经济所追求的理想方式。作为国民经济建设先行官的地质工作组成部分的探矿工程(岩土钻掘工程)技术与可持续发展有密不可分的关系。针对我们所处的时代特征及人类生存发展的时代主题，面对国民经济建设新形势，简要阐述了探矿工程(岩土钻掘工程)技术与可持续发展的关系以及技术本身发展的有关问题。