求解制图区域的地图图幅编号的算法研究

基于地理格网理论,从点、线、面三个方面,提出了归原法、斜率分段-同异侧判别法和投影反算-图廓内外判别法,这些算法可准确映射各种投影后制图区域所对应的基础地理信息数据范围,实现了制图范围内地理信息数据所属地图图幅编号的可视化查询。     

基于现场实测的缓倾硬性结构面连通率统计

通过对缓倾角硬性结构面数据的分析、判别,现场实测结构面几何特征的各基本要素,如结构面坐标、结构面产状、结构面间距、结构面的连续性、结构面迹长等,运用三维空间投影图解,最终求解结构面连通率,取代以往现场用线连通率经验判断的传统模式。本方法已应用于水电工程施工过程,效果良好。     

弯曲结构面几何条件的图解方法及其应用

分析岩体和山体稳定性的主要问题也就是确定结构面及临空面之间的相对位置关系及组合方式。坐标投影作图法是一种以正投影为基础,以分析岩石工程中结构面的几何关系及由其切割出来的块体的稳定性为目的的图解方法。对于弯曲结构面,采用“以直代曲”的原理,将其简化为有限个小平面的集合体进行分析。以蛇蟠岛国际旅游度假村清风洞室群1号洞为例,采用坐标投影作图法对弯曲结构面进行分析,来解决弯曲结构面几何条件的描述和确定问题。     

Using GIS to Model and Forecast HIV/AIDS Rates in Africa, 1986–2010

In this article we draw on the power of geographic information systems (GIS) to examine the progression of HIV/AIDS in Africa for the period from 1986 to 2003. We use GIS for two purposes: (1) to transform and interpolate a set of annual point-based HIV/AIDS rates into area data; and (2) to extract or “mine” annual HIV/AIDS prevalence rates from the interpolated area (country) level maps. Once the rates are extracted from the GIS analysis we then model and forecast them into the near future (i.e., 2004–2010) by using the UNAIDS Estimation and Projection Package (EPP) software. The article offers an alternative grounded in geospatial analysis for yielding estimates of HIV/AIDS rates in Africa. Using incomplete sets of data for the period from 1986 to 2003, mean HIV/AIDS rates are generated from spatially interpolated data and future trends are estimated. The results indicate that the HIV/AIDS epidemic for many countries in Africa has reached the saturation or maturity level as evidenced by the typical S-shaped curves in the trends over time. As a matter of fact, some countries have begun to experience a sustained decline in the rates (e.g., Uganda, Burundi, Rwanda, and Zimbabwe).     

高校“地图学”课程思政元素挖掘与课堂融入

高校专业课的课程思政建设是高校思想政治工作的基本载体。“地图学”是测绘工程、遥感科学与技术、地理信息科学、地理科学等本科专业的基础课,在测绘、地理等学科的课程思政建设中具有基础性地位。本文依据教学实践,归纳了地图学课程中与课程思政相结合的知识点,并介绍了在教学中如何巧妙、潜移默化地融入思政元素,在地图学课程教学过程中做到能力培养和素质提升共同进步。     

地图投影变换浅析

通过研究得出,将地球上各种地理事物与现象表示到平面上,需要采取一系列数学变换,才能使地面上的点与平面上的相应点建立起对应关系,从而才有可能反映出它们的位置、距离、方向、面积、形状及数量大小关系。地图之所以能在平面上反映出球面上事物与现象的空间准确位置和相互关系,就是由于它经过了地图投影的转换。通过研究地图投影变换问题,可以为基于离散网格的数据管理和建模应用提供很好的投影变换基础。     

铁路测量中坐标系的建立与转换

在铁路测量中,长度投影变形要求小于2．5cm／km。但是由于铁路为典型的线性工程,通常横跨多个投影带,因此采用国家标准3。带难以满足铁路测量精度要求,本文通过分析高斯投影长度变形,提出分段建立独立坐标系的方法,控制长度投影变形,满足精度要求,最后介绍利用GlobalMapper软件实现两个独立坐标系的转换。     

Direct georeferencing of airborne LiDAR data in national coordinates

The topographic mapping products of airborne light detection and ranging (LiDAR) are usually required in the national coordinates (i.e., using the national datum and a conformal map projection). Since the spatial scale of the national datum is usually slightly different from the World Geodetic System 1984 (WGS 84) datum, and the map projection frame is not Cartesian, the georeferencing process in the national coordinates is inevitably affected by various geometric distortions. In this paper, all the major direct georeferencing distortion factors in the national coordinates, including one 3D scale distortion (the datum scale factor distortion), one height distortion (the earth curvature distortion), two length distortions (the horizontal-to-geodesic length distortion and the geodesic-to-projected length distortion), and three angle distortions (the skew-normal distortion, the normal-section-to-geodesic distortion, and the arc-to-chord distortion) are identified and demonstrated in detail; and high-precision map projection correction formulas are provided for the direct georeferencing of the airborne LiDAR data. Given the high computational complexity of the high-precision map projection correction approach, some more approximate correction formulas are also derived for the practical calculations. The simulated experiments show that the magnitude of the datum scale distortion can reach several centimeters to decimeters for the low (e.g., 500 m) and high (e.g., 8000 m) flying heights, and therefore it always needs to be corrected. Our proposed practical map projection correction approach has better accuracy than Legat’s approach,¹ but it needs 25% more computational cost. As the correction accuracy of Legat’s approach can meet the requirements of airborne LiDAR data with low and medium flight height (up to 3000 m above ground), our practical correction approach is more suitable to the high-altitude aerial imagery. The residuals of our proposed high-precision map projection correction approach are trivial even for the high flight height of 8000 m. It can be used for the theoretical applications such as the accurate evaluation of different GPS/INS attitude transformation methods to the national coordinates.     

利用数值投影变换构建全球六边形离散格网

本文针对全球离散格网构建过程中从平面格网到球面格网的关键步骤进行讨论,提出了一种新型的评价球面离散格网几何属性最优化的目标函数,使用遗传算法优化,得到了球面上有限层次内最优化条件下的直接剖分格网。利用有限层次内最优化格网提供的控制点数据,结合数值投影变换理论,成功地构建了几何属性更加均匀的全球六边形离散格网系统。实验表明,相对于现有Snyder等积投影建立的全球格网,在格网单元的均匀度上更优;在运算效率方面,速度大约是Snyder投影的2.5-3倍。     

巷道地质编录三维空间数字化及投影变换算法

本文以提高矿山地、测、采计算机管理与辅助设计质量和效率为基本目标,根据矿山地测数据处理的一般流程,从巷道地质编录图件出发,建立基于井下测量数据的巷道地质编录三维空间数字化及投影变换算法;在此基础上,研制了一套符合矿山生产实际的地质编录智能分析系统,实现了巷道地质编录图件的数字化及自动成图。