镍铜硫化物矿石中磁黄铁矿固溶体的退火及其选矿意义

磁黄铁矿固治体从硫化物熔体结晶后，在缓慢冷却过程中经历了显著的退火。出治和出治体的租化是固治体退火的两种方式。叶片状的单斜磁黄铁矿和“火焰状”的镍黄铁矿原始出治相在降温过程中均可发生退火和租化。分布于磁黄铁矿等矿物粒间或包于磁黄铁矿粒内的粒状镍黄铁矿，不只是高温出治的直接产物，有一部分可能是由火焰状出治体租化而成的。磁黄铁矿中单斜变体的出治和租化可使矿石的磁性发生改变，镍黄铁矿出治体的租化使含镍矿物的粒度加大。因而，退火作用对矿石的选矿工艺性能有着显著影响。     

路基施工沉降观测精度要求及数据处理

本文通过对路基施工沉降观测的精度分析,提出了路基施工沉降观测的精度要求；根据路基施工沉降观测的特点，提出了相应的观测措施及数据处理方法。     

现代通讯技术在自动化测量系统中的应用

介绍了基于现代通讯技术ADSL及GPRS的两种远程监控方式在自动化测量系统工程中的应用。获得的结论对于相关技术及专业的应用研究具有一定的借鉴作用。     

武汉基准台超导重力仪重力潮汐观测结果

本文采用重力残差信号对武汉基准台超导重力仪的原始观测数据（２０秒采样）作预处理，将原始观测信号分解成重力潮汐和残差两部分，在残差信号中消除一些已知的干扰因素的影响。利用ＥＴＥＲＮＡ软件作调和分析，两主波（Ｏ１和Ｍ２）的重力潮汐参数（振幅因子和相位滞后）为：Ｏ１：１．１７８８±０．０００６，－０．５９７５°±０．０２８°；Ｍ２：１．１７１３±０．０００２，－０．５８７３°±０．００８°经海潮改正以后，Ｏ１和Ｍ２波的潮汐参数与Ｗａｈｒ－Ｄｅｈａｎｔ潮汐模型值相比，振幅因子的偏差优于０．１％。     

科学计算可视化技术的研究与应用

本文介绍了科学计算可视化技术的发展和应用情况，论述了这一新技术的特点及其在油气藏描述，工程设计ＣＡＤ等学科的应用和发展趋势。阐述了目前国际国内计算机图形学领域具体的研究方向和方法及图形软件、图形硬件的发展概况。     

航空物探平剖图自动绘制的可视化处理

简要介绍了航空物探平面剖面图的自动绘制方法,给出了绘制中对一些问题的处理方法;重点介绍了彩色渐变填充着色、彩色渐变渲染着色等几种可视化处理方法,并提出了着色中渐变度、透明度概念及应用方法。     

A New Model for Quantifying Anisotropic Scale Invariance and for Decomposition of Mixing Patterns

A new power–law function has been derived to represent the relationship between area of the set consisting of wave numbers with spectral energy density above S (A(>S)) on the two-dimensional frequency plane and S. The power–law relation holds if the field concerned possessing isotropic scale invariance or generalized scaling invariance involves rotational and ratio-scale changing transforms. The equation is valid for dealing with common exploration geophysical and geochemical fields encountered in mineral exploration and environmental assessment. This power–law function not only provides a new model for characterizing anisotropic scaling invariance for generalized scaling field, for example, estimating the power exponent of power spectrum of generalized scale invariance measure in frequency domain, but also forms a theoretical base for the S–A filtering technique developed for decomposing a mixing field into components on the basis of distinct scaling properties in the frequency domain. It is demonstrated that the method has potential to become a general technique for image processing and pattern recognition.     

Image processing of 2D resistivity data for imaging faults

A methodology to locate automatically limits or boundaries between different geological bodies in 2D electrical tomography is proposed, using a crest line extraction process in gradient images. This method is applied on several synthetic models and on field data set acquired on three experimental sites during the European project PALEOSIS where trenches were dug. The results presented in this work are valid for electrical tomographies data collected with a Wenner-alpha array and computed with an l₁ norm (blocky inversion) as optimization method. For the synthetic cases, three geometric contexts are modelled: a vertical and a dipping fault juxtaposing two different geological formations and a step-like structure. A superficial layer can cover each geological structure. In these three situations, the method locates the synthetic faults and layer boundaries, and determines fault displacement but with several limitations. The estimated fault positions correlate exactly with the synthetic ones if a conductive (or no superficial) layer overlies the studied structure. When a resistive layer with a thickness of 6 m covers the model, faults are positioned with a maximum error of 1 m. Moreover, when a resistive and/or a thick top layer is present, the resolution significantly decreases for the fault displacement estimation (error up to 150%). The tests with the synthetic models for surveys using the Wenner-alpha array indicate that the proposed methodology is best suited to vertical and horizontal contacts. Application of the methodology to real data sets shows that a lateral resistivity contrast of 1:5–1:10 leads to exact faults location. A fault contact with a resistivity contrast of 1:0.75 and overlaid by a resistive layer with a thickness of 1 m gives an error location ranging from 1 to 3 m. Moreover, no result is obtained for a contact with very low contrasts (1:0.85) overlaid by a resistive soil. The method shows poor results when vertical gradients are greater than horizontal ones. This kind of image processing technique should be systematically used for improving the objectiveness of tomography interpretation when looking for limits between geological objects.     

地理信息数据加工管理辅助系统的开发

目前,地理信息数据加工产业在管理方式方法上,存在着先进的生产力与不先进的管理方式相矛盾的问题.如何有效管理"管理信息流"等诸多管理问题,是一个无法回避和必须解决的课题.本文基于开发实践,介绍系统的技术路线、系统功能、系统特点以及系统数据库的设计.随着本系统的不断推广应用,一定能为地理信息数据加工行业的生产管理开拓新的模式,提供有力的支撑.