罕遇地震作用下的框架-摇摆刚架结构体系动力可靠度研究

针对钢筋混凝土框架结构的受力特点,采用增设摇摆刚架的抗震设计方法,以提高罕遇地震下建筑结构的安全性。建立了框架一摇摆刚架结构体系的计算模型,结合状态空间法与虚拟激励法,求解结构的平稳随机响应,并根据计算所得随机响应对框架一摇摆刚架体系的动力可靠度进行分析。以西部地区某已建成的6层框架结构为算例,探讨了罕遇地震作用下不同刚度比的摇摆刚架对新结构体系动力可靠度的影响。结果表明,通过增设不同刚度比的摇摆刚架,可以有效协调结构体系的变形模式,充分发挥结构的耗能能力,降低整体结构的条件失效概率。     

Statistical moment-based structural damage detection method in time domain

A novel structural damage detection method with a new damage index,i.e.,the statistical moment-based damage detection(SMBDD) method in the frequency domain,has been recently proposed.The aim of this study is to extend the SMBDD method in the frequency domain to the time domain for building structures subjected to non-Gaussian and non-stationary excitations.The applicability and effectiveness of the SMBDD method in the time domainis verified both numerically and experimentally.Shear buildings with various damage scenarios are first numerically investigated in the time domain taking into account the effect of measurement noise.The applicability of the proposed method in the time domain to building structures subjected to non-Gaussian and non-stationary excitations is then experimentally investigated through a series of shaking table tests,in which two three-story shear building models with four damage scenarios aretested.The identified damage locations and severities are then compared with the preset values.The comparative results are found to be satisfactory,and the SMBDD method is shown to be feasible and effective for building structures subjected to non-Gaussian and non-stationary excitations.     

Residual drift demands in moment‐resisting steel frames subjected to narrow‐band earthquake ground motions

This paper presents the main results of the evaluation of residual inter‐story drift demands in typical moment‐resisting steel buildings designed accordingly to the Mexican design practice when subjected to narrow‐band earthquake ground motions. Analytical 2D‐framed models representative of the study‐case buildings were subjected to a set of 30 narrow‐band earthquake ground motions recorded on stations placed in soft‐soil sites of Mexico City, where most significant structural damage was found in buildings as a consequence of the 1985 Michoacan earthquake, and scaled to reach several levels of intensity to perform incremental dynamic analyses. Thus, results were statistically processed to obtain hazard curves of peak (maximum) and residual drift demands for each frame model. It is shown that the study‐case frames might exhibit maximum residual inter‐story drift demands in excess of 0.5%, which is perceptible for building's occupants and could cause human discomfort, for a mean annual rate of exceedance associated to peak inter‐story drift demands of about 3%, which is the limiting drift to avoid collapse prescribed in the 2004 Mexico City Seismic Design Provisions. The influence of a member's post‐yield stiffness ratio and material overstrength in the evaluation of maximum residual inter‐story drift demands is also discussed. Finally, this study introduces response transformation factors, T_p, that allow establishing residual drift limits compatible with the same mean annual rate of exceedance of peak inter‐story drift limits for future seismic design/evaluation criteria that take into account both drift demands for assessing a building's seismic performance. Copyright © 2013 John Wiley & Sons, Ltd.     

云南中小地震矩震级的测定

利用云南省测震台网的数字地震波形资料,反演了2008年1月至2012年9月675个中小地震的震源波谱参数,并计算了这些地震的地震矩M0和矩震级Mw,最后利用回归分析方法得到了近震震级ML和Mw之间的关系式.     

一种顾及影像间位置关系的匀光方法

提出了基于矩匹配的色彩平衡算法,在顾及影像间位置关系的基础上将影像的均值和均方差映射到给定的数值,并且使不同区域的灰度均值和均方差近似相等,在尽量保持影像原有色调的条件下消除影像之间以及影像内部的色调和亮度差异。     

HIGH PRECISION CCD CALIBRATION AND ITS APPLICATIONS

ABSTRACT

With the help of CCD images, the realization of high precision positioning and measurement has become the basic standard for machine vision and real time photogrammetry systems. However, deformation and other sorts of degradation occurring during transmission are major limiting factors of the precision attainable with most current CCD cameras and frame grabbers. So a precise radiometric and geometric transmission of images from CCD sensor to memory is a fundamental aspect of CCD camera calibration. The geometric calibration system, which uses some image processing algorithms of the CCD camera based on the researched and developed system is discussed. The reliability and validity are also discussed. The experimental results for the calibration of the CCD array will be taken as an important quality index for CCD evaluation.     

Influence of the mean period of ground motion on the inelastic dynamic response of single and multi degree of freedom systems

This paper focuses on examining the effects of frequency content of the ground motion on the inelastic demands imposed on both single degree of freedom (SDF) and multi degree of freedom (MDF) steel‐framed systems. A detailed literature review is conducted to identify the indicator that best represents the frequency content of ground motion. The mean period (T_m) of ground motion is selected owing to its ability to distinguish between various spectral shapes of ground motion, and its relationship with magnitude, distance and site characteristics. Inelastic displacement demands on SDF systems for target ductility levels are first studied in the light of T_m, using a suite of 128 ground motion records. The study is then extended to MDF systems with the help of incremental dynamic analysis by employing the same ground motion ensemble to assess the influence of T_m on various engineering demand parameters. The results obtained indicate that, for SDF systems, the amplification of displacements occurs when the period ratio between elastic period (T_e) and T_m is lower than unity. For MDF systems, the results demonstrate that the influence of higher modes on the base shear and maximum storey drift profile becomes more pronounced, as T_m approaches the higher mode periods of the structure. These observations, for both SDF and MDF systems, tend to be more evident for higher levels of inelasticity. The significance of the results, with particular reference to European seismic design procedures, is highlighted. Copyright © 2010 John Wiley & Sons, Ltd.     

2009年11月至2010年11月27次中强地震的快速矩张量解

经过半个世纪的发展,地震震源的矩张量表示及其反演已日臻成熟(Dziewonski,Woodhouse,1983).矩张量解不但能够较好地反映地震震源的特性,还能为其它研究提供有用的参考.一些科研机构和组织,如美国地质调查局(USGS)和全球矩心矩张量研究组(GCMT)已经能够在震后5小时内准实时地发布矩     

Numerical simulation of the seismic behavior of self-centering steel beam-column connections with bottom flange friction devices

A new type of steel moment resisting frame with bottom ? ange friction devices (BFFDs) has been developed to provide self-centering capacity and energy dissipation, and to reduce permanent deformations under earthquakes. This paper presents a numerical simulation of self-centering beam-column connections with BFFDs, in which the gap opening /closing at the beam-column interfaces is simulated by using pairs of zero-length elements with compression-only material properties, and the energy dissipation due to f...