A three‐component end‐member analysis of streamwater hydrochemistry in a small Japanese forested headwater catchment

Intensive water sampling in conjunction with hydrological observations was conducted during three different rainstorms in order to understand the effects of rainfall events on the temporal variation of streamwater chemistry in a small headwater forest catchment. Concentrations of Na⁺ and SO₄^2? decreased as the discharge rate increased. Hydrograph separation of the components was made using the three‐component model based on the end‐members mixing analysis (EMMA). The three end‐members were:

• 1 the groundwater in the saturated zone that prescribes the chemistry of the baseflow;
• 2 the throughfall that dilutes the streamwater;
• 3 the groundwater in the transient saturated zone prescribed, which was dependent on the groundwater level.

When the groundwater level was lower, only the two components, groundwater in the saturated zone and throughfall, affected the streamwater chemistry. When the groundwater level rose and the saturated zone spread, the groundwater in the transient saturated zone became the third component. When the groundwater in the transient saturated zone contributed to the discharge, this component became the dominant source and the streamwater chemistry was affected by the groundwater chemistry in the transient saturated zone. When this component was discharged as the saturation overland flow, the streamwater chemistry was greatly affected by this component. Copyright © 2001 John Wiley & Sons, Ltd.     

打滑地层新型孕镶金刚石钻头

在分析打滑地层特点的基础上,指出了钻进该地层所存在的问题,提出了用于打滑地层钻进的新型孕镶金刚石钻头的设计思路,在钻头工作层中采用主、辅两种磨料,并对这两种磨料的工作机理、处理工艺以及该新型钻头的制造进行了阐述.钻头的室内钻进试验结果表明:在钻进极坚硬致密的锆刚玉时,相对于普通金刚石钻头,新型孕镶金刚石钻头的钻进时效提高1.93倍,平均磨损量增加38%,具有高时效、相对寿命长的优点,是打滑地层钻进的理想钻头.     

Identification of modal parameters of non‐classically damped linear structures under multi‐component earthquake loading

A method for parametric system identification of classically damped linear system in frequency domain is adopted and extended for non‐classically damped linear systems subjected up to six components of earthquake ground motions. This method is able to work in multi‐input/multi‐output (MIMO) case. The response of a two‐degree‐of‐freedom model with non‐classical damping, excited by one‐component earthquake ground motion, is simulated and used to verify the proposed system identification method in the single‐input/multi‐output case. Also, the records of a 10 storey real building during the Northridge earthquake is used to verify the proposed system identification method in the MIMO case. In this case, at first, a single‐input/multi‐output assumption is considered for the system and modal parameters are identified, then other components of earthquake ground motions are added, respectively, and the modal parameters are identified again. This procedure is repeated until all four components of earthquake ground motions which are measured at the base level of the building are included in the identification process. The results of identification of real building show that consideration of non‐classical damping and inclusion of the multi‐components effect of earthquake ground motions can improve the least‐squares match between the finite Fourier transforms of recorded and calculated acceleration responses. Copyright © 2006 John Wiley & Sons, Ltd.     

GIS中地籍宗地面积的方差分量估计

探讨在地籍宗地数字化的面积处理问题中,把已知面积数据和数字化坐标同时作为观测值的面积处理方法.采用方差分量估计,解决已知面积数据参与平差时的权的确定.通过实例分析,认为采用条件平差方差分量估计方法来对宗地面积处理,能够更加合理地调整已有面积与由数字化坐标得到的面积值之间的差异.     

Helmert方差分量估计的粗差检验与抗差解

当观测值中含有粗差时，检验表明Helmert方差分量估计结果同样含有粗差，且粗差还可能会发生转移，为有效地抵制粗差和随机模型差的互相影响，指出了发生这一转移的原因，介绍了基于双因子等价权的抗差估计，并针对相关Helmert方差分量估计抗差解求解过程中容易出现的法矩阵0值溢出问题，提出了改进方法。     

ASP应用中COM组件开发方法研究

从ASP技术与COM技术出发，针对MCU远程控制应用的多层分布体系结构特点及应用要求，详细论述了如何进行组件线程类型选择、接口设计、物理定位开发与实现具有特定功能的COM组件并如何在ASP应用中创建和扫行，以实现远程控制MCU功能。论述了在设计与实现COM组件过程中，其安全性与作用域的选择。     

若干交代成岩成矿作用组份质量转移的计算与分析

本以几种常见的交代成岩成矿作用为例，介绍了一种新的综合性的组份质量转移计算法－真恒量定值非固定同体积质量计算法（TCFM法），并根据计算结果对这些成岩，成岩作用的形成条件进行了分析。     

柴东侏罗系源岩生油组分荧光特征与生烃意义

通过荧光特征研究了柴达木盆地东部侏罗系源岩生油组分,指出了不同生油组分对生烃的贡献、意义及其热演化特征。侏罗系源岩有暗色泥岩、油页岩、煤和炭质泥岩四种类型,主要生油组分为壳质组和矿物—沥青基质,不同生油组分荧光特征的差异又是生烃潜力大小、热演化程度和降解情况的综合反映。     

测量地应力的新方法

论述了用赤平投影学方法分析确定地应力的主方向，用Kaiser效应测量地应力大小。将两者有机结合起来可以克服Kaiser效应测量地应力时，主应力方向难以确定的最大缺点。通过和传统现场地应力测量方法比较，表明该法具有更为简单，更为经济，准确度高等优点，便于大量测量，以寻求工程地区地应力变化规律。