Refining the pre-industrial atmospheric Pb isotope evolution curve in Europe using an 8000 year old peat core from NW Spain

Pb pollution has existed for several millennia and remains relevant today. By using peat cores as environmental archives it is possible to reconstruct this long history on a regional scale. This is a significant contribution to the findings from ice core records, the only other archive recording purely atmospheric additions. Without information that allows linking and comparison between sites regionally, within Europe and elsewhere, our ability to make coherent global models of the natural Pb cycle, and anthropogenic forcing of this cycle, is limited. In this respect, the characteristics of the Pb pre-pollution aerosol (PPA) are important to define globally. We characterize for the first time a PPA in Southern Europe with [Pb] = 0.78 ± 0.86 μg g^− 1, net Pb accumulation rates of 0.032 ± 0.030 mg m^− 2 y^− 1 and a ²⁰⁶Pb / ²⁰⁷Pb signature of 1.25470 ± 0.02575. This PPA Pb isotope signature is more radiogenic than that found thus far in Western and Northern Europe. Spain is a historically important mining site. Using three-isotope plots and a pool of potential Pb isotope signatures, a detailed source appointment of both natural and anthropogenic Pb sources was made. We found evidence of Saharan aridification and its termination ∼4400 BP and/or agricultural signals and strong local control (from rock and soil) of the Pb PPA. Human impact is first recorded at 3210 BP but does not exceed 50% of deposited Pb until 3005 BP. Mines in SE Spain dominate early Pb pollution history at this site. During the rise of Roman rule, contributions come from mines in N, NW and SW Spain with no strong indication of other European mining activities. In Medieval and Industrial times local contributions to the peat bog are reduced.     

The lacustrine sedimentary records of coal-burning atmospheric pollution

With the acceleration of industrialization, coal- burning atmospheric pollution is getting more and more serious in many regions in China. However, there are only about ten odd years literature records about pollution in some large and mid-sized cities, where the atmosphere has perhaps been polluted for several decades, and therefore it is difficult to know the process and characteristic of pollution, and diffi-cult to evaluate its damage to environment. Lacustrine sediment, a natural record w…     

Assessment of regional air pollution distribution by point cumulative semivariogram method at Erzurum urban center, TURKEY

In the assessment of air quality, regional distribution and dispersion with distance are important, together with the variations of pollutants in time. On this occasion, the point cumulative semi-variogram (PCSV) method is used in order to find simply regional distribution of pollutants of Erzurum urban centre. This method is based simply on the summation of square differences in air pollutant concentrations between different sites. Monthly regional variation maps of Erzurum are constructed by finding radius of influence (for SO₂, from 1000 m to 3500 m and, for TSP, 1000–2000 m) and PCSV scattering diagram data at different levels by using monthly average sulphur dioxide (SO₂) and total suspended particulate (TSP) matter concentrations in 2001–2002 winter season. Consequently, the air pollution distribution of Erzurum is assessed.     

Transformation of arsenic compounds in modern intertidal sediments of Iriomote Island, Japan

The arsenic accumulation process in intertidal sediments of Iriomote Island, Japan, is analyzed as a naturally balanced arsenic-fixation system. Major and minor element chemistry is analyzed by X-ray fluorescence photometry, mineralogy is investigated by X-ray diffractometry, and four arsenic compounds are characterized by hydrogen-generated atomic absorption photometry. It is found that arsenic is accumulated by iron hydroxides/oxides precipitated following the decomposition of humic acids in the shallower sediment, and is subsequently incorporated into iron sulfide minerals at depth. The arsenic is immobile during incorporation into arsenic-bearing phases, suggesting that arsenic is unlikely to be released into the porewater under natural conditions in early diagenesis. The formation and decomposition of arsenic-bearing organic compounds appear to be associated with the formation and decomposition of arsenic in oxyhydroxides/oxides, suggesting that microbial activity may play an important role in controlling the behavior of arsenic and arsenic-bearing phases in the sediment column.     

Correlation between magnetic susceptibility and heavy metals in urban topsoil: a case study from the city of Xuzhou, China

Anthropogenic influence, mainly due to urban and industrial activities and traffic exhaust, may affect urban topsoil via atmospheric contamination and solid waste. Magnetic susceptibility measurements were conducted on 21 urban topsoil samples from the city of Xuzhou, China. High intensities of magnetic susceptibility were detected in the majority of the samples. SEM analysis shows that magnetic minerals are in the form of spherules and mainly due to anthropogenic inputs. The heavy metals Pb, Cu, Zn, Se, Sc, Mo, Fe, and Bi show strong correlations with magnetic susceptibility, and Ag, Ba, Cd, Ni, Cr, Sb, and Sn, on the other hand, show a weak correlation with magnetic susceptibility. Whereas, of these metals studied, only Hg has no significant correlation with the susceptibility. The Tomlinson pollution load index (PLI) also shows significant correlation with the susceptibility (χ). The present study shows that magnetic susceptibility is a fast, inexpensive, and non-destructive method for the detection and mapping of contaminated soils.     

Environmental pollution impact on water and sediments of Kumaun lakes, Lesser Himalaya, India: a comparative study

A study of the water and sediment chemistry of the Nainital, Bhimtal, Naukuchiyatal and Sattal Lakes of Kumaun, has shown that the water of these lakes are alkaline and that electrical conductivity, total dissolved solid and bicarbonate HCO ₃ ⁻ are much higher in Nainital than in the other three lakes. The weathering of limestone lithology and anthropogenic pollution, the latter due to the very high density of population in the Nainital valley, are the primary sources of enhanced parameters. The low pH of Nainital Lake water is due to low photosynthesis and enhanced respiration, increasing CO₂ in the water and the consequent enhancement of Ca²⁺ and HCO ₃ ⁻ . The dissolved oxygen in Nainital Lake is less compared to other lakes, indicating anoxic conditions developing at the mud–water interface at depth. The PO ₄ ³⁻ content in Nainital is higher (124 μg/l), showing an increasing trend over time leading to eutrophic conditions. The trace metals (Cu, Co, Zn, Ni, Mn, and Sr) are present in greater amounts in the water of Nainital Lake than in the other three lakes, though Fe and Cr are high in Bhimtal and Fe in Naukuchiyatal. The higher abundance is derived from the leaching of Fe–Mg from metavolcanic and metabasic rocks. Most of the heavy metals (Cr, Ni, Cu, Mn, Fe, Sr, and Zn) significantly enrich the suspended sediments of the lakes compared to the bed sediments which due to their adsorption on finer particles and owing to multiple hydroxide coating and organic content, except for Fe, which is enriched in the bed sediments. The high rate of sedimentation, 11.5 mm/year in Nainital, compared to Bhimtal with 4.70 mm/year, Naukuchiyatal with 3.72 mm/year, and Sattal with 2.99 mm/year, has resulted in shorter residence time, poor sorting of grains, and lesser adsorption of heavy metals, leading consequently, their depletion in the bed sediments of Nainital Lake.     

Water pollution in gold mining industry: a case study in Roşia Montană district, Romania

The preliminary study of streams and rivers from the Roşia Montană area revealed that the concntration of heavy metals— Cd, Mn, Cu, Pb, and Zn—are above accepted limits. The gold extraction method is based on flotation. The most important pollution sources are mine tailings. The determinations were performed for samples collected in: April 2004, July 2004, September 2004, November 2004, February 2005 and May 2005. The highest concentrations were found for cadmium in September 2004: 0.17 mg/L; for copper in September 2004: 1.38 mg/L; for manganese in July 2004: 239.4 mg/L; for lead in May 2005: 0.54 mg/L; and for zinc in September 2004: 35.37 mg/L;. This study involved three small rivers (streams) that flow into the Mureş River and finally into the Danube River, having a great impact on human health and environmental stability in the area. In May 2005, a sample of drinking water from the mining district was also collected.     

松花江上游地区汞污染的化学生态效应

采样分析了吉林省东部松花江上游金矿开采区及其附近水、土壤、动植物及河流沉积物样品中汞的含量，发现河流沉积物中汞的污染相当严重；受其影响当地的植物和两栖类动物——中国林蛙体内总汞和甲基汞含量也明显高于对照组。实验表明，林蛙内脏对汞的富集能力大于肌肉；秋季对汞的富集大于春季；河流沉积物中甲基汞的含量与林蛙体内甲基汞的含量有较好的正相关。汞污染的来源与区域内个体金矿的滥采滥排有直接关系，表明人类活动所产生的有毒重金属在地表过程中出现了化学生态效应。     

Development of a soil moisture‐based distributed hydrologic model for determining hydrologically based critical source areas

A simple grid cell‐based distributed hydrologic model was developed to provide spatial information on hydrologic components for determining hydrologically based critical source areas. The model represents the critical process (soil moisture variation) to run‐off generation accounting for both local and global water balance. In this way, it simulates both infiltration excess run‐off and saturation excess run‐off. The model was tested by multisite and multivariable evaluation on the 50‐km² Little River Experimental Watershed I in Georgia, U.S. and 2 smaller nested subwatersheds. Water balance, hydrograph, and soil moisture were simulated and compared to observed data. For streamflow calibration, the daily Nash‐Sutcliffe coefficient was 0.78 at the watershed outlet and 0.56 and 0.75 at the 2 nested subwatersheds. For the validation period, the Nash‐Sutcliffe coefficients were 0.79 at the watershed outlet and 0.85 and 0.83 at the 2 subwatersheds. The per cent bias was less than 15% for all sites. For soil moisture, the model also predicted the rising and declining trends at 4 of the 5 measurement sites. The spatial distribution of surface run‐off simulated by the model was mainly controlled by local characteristics (precipitation, soil properties, and land cover) on dry days and by global watershed characteristics (relative position within the watershed and hydrologic connectivity) on wet days when saturation excess run‐off was simulated. The spatial details of run‐off generation and travel time along flow paths provided by the model are helpful for watershed managers to further identify critical source areas of non‐point source pollution and develop best management practices.     

The Fluxes and Behaviour of Plumes Inferred from Measurements of Coherent Structures within Images of the Bulk Flow

This paper describes how measurements of the movement of identifiable features at the edge of a turbulent plume can be interpreted to determine the properties of the mean flow and consequently, using plume theory, can be used to make estimates of the fluxes of volume (mass), momentum, and buoyancy in a plume. This means that video recordings of smoke rising from a chimney or buoyant material from a source on the sea bed can be used to make accurate estimates of the source conditions for the plume. At best we can estimate the volume flux and buoyancy flux to within about 5% and 15% of the actual values, respectively. Although this is restricted to the case of a plume rising in a stationary and unstratified environment, we show that the results may be of practical use in other more complex situations. In addition, we demonstrate that large-scale (turbulent) coherent structures at the plume edge form on a scale approximately 40% of the local (mean) plume half-width and travel at almost 60% of the average local (mean) velocity in the plume.