无机盐类对天然矿物低温催化混合酯生烃反应的影响

脂肪酸酯是一类重要的生烃母质。选择了十四烷酸甲酯、十六烷酸甲酯和十八烷酸甲酯的混合酯为模型反应物,以方解石、白云石、伊利石、钙蒙脱石和黄铁矿为催化剂,分别考察了氯化钾、氯化镁、氯化钠、硫酸钠以及混合盐对天然矿物低温催化混合酯生烃反应的影响。结果表明,无机盐类对矿物催化下混合酯的生烃反应均有不同程度的影响,硫酸钠具有反催化作用,其它盐类具有正催化作用。且在各无机盐存在下,不同的矿物表现出不同的催化活性。     

预防油页岩地层钻进中压差卡钻的措施

分析了油页岩地层钻进中压差卡钻发生的原因,提出了预防压差卡钻的途径及处理方法,并通过工程实例来强调预防为主的重要性。     

GYD-300型全液压动力头工程钻机的研制

GYD-300型全液压动力头工程钻机为全液压驱动,动力头反循环式机型。液压系统采用插装阀集成结构,电液复合操作。使用PC控制监测系统,适时检测孔底各相关压力,对不同地层进行范围设置,实现钻进过程中孔底的自动、手动恒压钻进。重点介绍了该钻机的结构特点、实验情况、主要技术参数等。     

海拉尔盆地贝尔凹陷兴安岭群储层粘土矿物组成及成因研究

油田注水开发是保持地层能量,提高采收率的有效手段.海拉尔地区由于粘土矿物含量高,在开发过程中储层遇水易泥化、坍塌,严重影响油气的有效开采.通过X射线衍射、偏光显微镜观察和扫描电镜分析,确定了海拉尔盆地贝16断块兴安岭群储层自上而下存在三种粘土矿物组合:蒙脱石 高岭石 (绿泥石)→高岭石 伊/蒙间层 伊利石 (绿泥石)→伊利石 绿泥石 绿/蒙间层 伊/蒙间层.粘土总量在9.1%～69.1%之间,由地层浅部到深部呈现由高到低的变化规律.详细研究了水敏性极强的钠蒙脱石及其间层矿物,认为凝灰物质的水解蚀变以及长石和中、酸性岩屑在成岩过程中的次生变化是造成海拉尔地区粘土含量高的主要因素.     

矿物数字博物馆的建设构想与实现

在基于互联网的应用、信息数字化、多种技术发展较为成熟及适应公众需求的基础上,对矿物数字博物馆的建设做了简要的分析,将矿物按矿物一结晶学分类方案将馆藏矿物进行合理的分类,设计了七大功能结构和相应的子结构,并对矿物所要展示的内容设定了标准.建设矿物数字博物馆旨在利用三维技术、多媒体技术、文字信息等,将矿物从宏观的外形到抽象的晶体形态和微观的晶体结构及其最小单位结构通过网络的形式具体展现给观众.矿物数字博物馆的建设可以为人们认知整个矿物世界搭建一个良好的平台,在科研教学、推动国民科学普及教育、培养创新人才方面发挥重要作用.     

岩石破坏前后曲线分类及脆-延转换围压研究——蚀变岩常规三轴压缩试验Ⅰ

蚀变岩是工程中少见的软弱岩类,在西南某重大水电工程中,蚀变岩处于工程的重要部位,为保证工程的长期稳定性,对蚀变岩力学特性进行了深入全面的试验研究.通过对孔隙度不同的饱水蚀变岩进行系统的常规三轴压缩试验和总结分析,提出了蚀变岩三轴压缩下破坏前应力.应变曲线可分为3大类,破坏后应力-应变曲线亦可分为3大类的形态模式.并得出结论:蚀变岩的破坏类型受围压与孔隙度的共同影响,在给定的12 MPa围压下蚀变岩以脆性破坏为主,只有孔隙度大于16%且围压大于4 MPa时才有可能进入脆-延转换状态,且脆-延转换围压随孔隙度增加而降低,临界状态应力比随孔隙度增大而增加.     

东菲律宾海深水铁锰结壳发育站位沉积物的粒度及黏土矿物学特征

大洋铁锰结壳是潜在的重要海洋资源,多年来世界各国对此已作了大量调查.传统意义上的铁锰结壳均分布于3000m水深以浅的海山基岩上.中国科学院海洋研究所在对东菲律宾海的地质调查中采集到大量褐黑色深水铁锰结壳.在300多个站位的取样中,在44个站位采集到结壳样品,可见结壳在研究区的分布较为广泛.该结壳发育于4000~5000m水深的致密至半固结沉积物的表层,厚度一般为2~3cm,最厚可达7cm.结壳为板(层)状.     

Effect of Cyclic Loading Frequency on Undrained Behaviors of Undisturbed Marine Clay

Based on a series of cyclic triaxial tests, the effect of cyclic frequency on the undrained behaviors of undisturbed marine clay is investigated. For a given dynamic stress ratio, the accumulated pore water pressure and dynamic strain increase with the number of cycles. There exists a threshold value for beth the accumulated pore water pressure and dynamic strain, below which the effect of cyclic frequency is very small, but above which the accumulated pore water pressure and dynamic strain increase intensely with the decrease of cyclic frequency for a given number of cycles. The dynamic strength increases with the increase of cyclic frequency, whereas the effect of cyclic frequency on it gradually diminishes to zero when the number of cycles is large enough, and the dynamic strengths at different frequencies tend to the same limiting minimum dynamic strength. The test results demonstrate that the reasons for the frequency effect on the undrained soil behaviors are beth the creep effect induced by the loading rate and the decrease of sample effective confining pressure caused by the accumulated pore water pressure.     

Spatial patterns and environmental risks of ringnet fishing along the Kenyan coast

Ringnet fishing began in the early 20th century and is practised worldwide, mainly to target nearshore pelagic species. The method was introduced to Kenya’s coastal waters by migrant fishers from Tanzania. However, the impacts of this fishing gear remain poorly assessed. We assessed the spatial distribution of ringnet fishing effort and its possible effects on ecosystem components, such as coral reefs, marine megafauna and marine protected areas, on the south coast of Kenya. We tracked 89 ringnet fishing trips made from December 2015 to January 2016 and used spatial multicriteria analysis to determine hotspots of possible environmental risks. The results showed that habitat type and bathymetric profile influenced the spatial distribution of ringnet fishing effort. Mixed seagrass and coral habitats had the highest concentration of the effort. Most of the habitats in the study area were moderately exposed to the impacts of the ringnet fishery. The study identifies high-risk areas that require spatial measures to minimise possible environmental risks of the gear both to habitats and to endangered sea turtles.     

Dynamic analysis of a vertical plate exposed to breaking wave impact

From the experimental studies in recent years, it has become known that when a wave breaks directly on a vertical faced coastal structure, high magnitude impact pressures are produced. The theoretical and experimental studies show that the dynamic response of such structures under wave impact loading is closely dependent on the magnitude and duration of the load history. The dynamic analysis and design of a coastal structure can be succeeded provided the design load history for the wave impact is available. Since these types of data are very scarce, it is much more convenient to follow a method which is based on static analysis for the dynamic design procedure. Therefore, to facilitate the dynamic design of a vertical plate that is exposed to breaking wave impact, a multiplication factor called “dynamic magnification factor” is herein presented which is defined as the ratio of the maximum value of the dynamic response to that found by static analysis. The computational results of the present study show that the dynamic magnification factor is a useful ratio to transfer the results of static analysis to the dynamic design of a coastal plate for the maximum impact pressure conditions of p_max/γH₀≤18.