Atomistic simulation of the structure and elastic properties of pyrite (FeS2) as a function of pressure

Interatomic potential parameters have been derived at simulated temperatures of 0 K and 300 K to model pyrite FeS₂. The predicted pyrite structures are within 1% of those determined experimentally, while the calculated bulk modulus is within 7%. The model is also able to simulate the properties of marcasite, even though no data for this phase were included in the fitting procedure. There is almost no difference in results obtained for pyrite using the two potential sets; however, when used to model FeS₂ marcasite, the potential fitted at 0 K performs better. The potentials have also been used to study the high-pressure behaviour of pyrite up to 44 GPa. The calculated equation of state gives good agreement with experiment and shows that the Fe–S bonds shorten more rapidly that the S–S dimer bonds. The behaviour of marcasite at high pressure is found to be similar to that of pyrite.     

Petrological and geochronological constraints on high pressure, high temperature metamorphism in the Snowbird tectonic zone, Canada

The upper deck of the East Athabasca mylonite triangle (EAmt), northern Saskatchewan, Canada, contains mafic granulites that have undergone high P–T metamorphism at conditions ranging from 1.3 to 1.9 GPa, 890–960 °C. Coronitic textures in these mafic granulites indicate a near‐isothermal decompression path to 0.9 GPa, 800 °C. The Godfrey granite occurs to the north adjacent to the upper deck high P–T domain. Well‐preserved corona textures in the Godfrey granite constrain igneous crystallization and early metamorphism in the intermediate‐pressure granulite field (Opx + Pl) at 1.0 GPa, 775 °C followed by metamorphism in the high pressure granulite field (Grt + Cpx + Pl) at 1.2 GPa, 860 °C. U–Pb geochronology of zircon in upper deck mafic granulite yields evidence for events at both c. 2.5 Ga and c. 1.9 Ga. The oldest zircon dates are interpreted to constrain a minimum age for crystallization or early metamorphism of the protolith. A population of 1.9 Ga zircon in one mafic granulite is interpreted to constrain the timing of high P–T metamorphism. Titanite from the mafic granulites yields dates ranging from 1900 to 1894 Ma, and is interpreted to have grown along the decompression path, but still above its closure temperature, indicating cooling following the high P–T metamorphism from c. 960–650 °C in 4–10 Myr. Zircon dates from the Godfrey granite indicate a minimum crystallization age of 2.61 Ga, without any evidence for 1.9 Ga overgrowths. The data indicate that an early granulite facies event occurred at c. 2.55–2.52 Ga in the lower crust (c. 1.0 GPa), but at 1.9 Ga the upper deck underwent high P–T metamorphism, then decompressed to 0.9–1.0 GPa. Juxtaposition of the upper deck and Godfrey granite would have occurred after or been related to this decompression. In this model, the high P–T rocks are exhumed quickly following the high pressure metamorphism. This type of metamorphism is typically associated with collisional orogenesis, which has important implications for the Snowbird tectonic zone as a fundamental boundary in the Canadian Shield.     

Effect of the chemical composition of the crust on the metamorphic evolution of orogenic wedges

Petrological data provide a good record of the thermal structure of deeply eroded orogens, and, in principle, might be used to relate the metamorphic structure of an orogen to its deformational history. In this paper, we present two‐dimensional thermal modelling of various subduction models taking into account varying wedge geometry as well as variation of density and topography with metamorphic reactions. The models clearly show that rock type accreted in the wedge has important effects on the thermal regime of orogenic wedges. The thermal regime is dominated by radiogenic heat production. Material having high radioactive heat production, like the granodioritic upper crust, produces high temperature metamorphism (amphibolitic conditions). Material with low radioactive heat production results in low temperature metamorphism of greenschist or blueschist types depending on the thickness of the wedge. Application of this model to seemingly unrelated areas of the Central Alps (Lepontine Dome, Grisons) and Eastern Alps (Tauern Window) explains the coexistence and succession of distinct Barrovian and blueschist facies metamorphic conditions as the result of a single, continuous tectonic process in which the main difference is the composition of the incoming material in the orogenic wedge. Accretion of the European upper continental crust in the Lepontine and Tauern Domes produces Barrovian type metamorphism while accretion of oceanic sediments results in blueschist facies metamorphism in the Valaisan domain.     

Ultrahigh-pressure metamorphism in the forbidden zone: the Xugou garnet peridotite, Sulu terrane, eastern China

The Xugou garnet peridotite body of the southern Sulu ultrahigh‐pressure (UHP) terrane is enclosed in felsic gneiss, bounded by faults, and consists of harzburgite and lenses of garnet clinopyroxenite and eclogite. The peridotite is composed of variable amounts of olivine (Fo₉₁), enstatite (En_92?93), garnet (Alm_20?23Prp_53?58Knr_6?9Grs_12?18), diopside and rare chromite. The ultramafic protolith has a depleted residual mantle composition, indicated by a high‐Mg number, very low CaO, Al₂O₃ and total REE contents compared to primary mantle and other Sulu peridotites. Most garnet (Prp_44?58) clinopyroxenites are foliated. Except for rare kyanite‐bearing eclogitic bands, most eclogites contain a simple assemblage of garnet (Alm_29?34Prp_32?50Grs_15?39) + omphacite (Jd_24?36) + minor rutile. Clinopyroxenite and eclogite exhibit LREE‐depleted and LREE‐enriched patterns, respectively, but both have flat HREE patterns. Normalized La, Sm and Yb contents indicate that both eclogite and garnet clinopyroxenite formed by high‐pressure crystal accumulation (+ variable trapped melt) from melts resulting from two‐stage partial melting of a mantle source. Recrystallized textures and P–T estimates of 780–870 °C, 5–7 GPa and a metamorphic age of 231 ± 11 Ma indicate that both mafic and ultramafic protoliths experienced Triassic UHP metamorphism in the P–T forbidden zone with an extremely low thermal gradient (< 5 °C km^?1), and multistage retrograde recrystallization during exhumation. Develop of prehnite veins in clinopyroxenite, eclogite, felsic blocks and country rock gneiss, and replacements of eclogitic minerals by prehnite, albite, white mica, and K‐feldspar indicate low‐temperature metasomatism.     

Contrasting metamorphic evolution of metasedimentary rocks from the Çine and Selimiye nappes in the Anatolide belt, western Turkey

Abstract P–T conditions, mineral isograds, the relation of the latter to foliation planes and kinematic indicators are used to elucidate the tectonic nature and evolution of a shear zone in an orogen exhumed from mid‐crustal depths in western Turkey. Furthermore, we discuss whether simple monometamorphic fabrics of rock units from different nappes result from one single orogeny or are related to different orogenies. Metasedimentary rocks from the Çine and Selimiye nappes at the southern rim of the Anatolide belt of western Turkey record different metamorphic evolutions. The Eocene Selimiye shear zone separates both nappes. Metasedimentary rocks from the Çine nappe underneath the Selimiye shear zone record maximum P–T conditions of about 7 kbar and >550 °C. Metasedimentary rocks from the overlying Selimiye nappe have maximum P–T conditions of 4 kbar and c. 525 °C near the base of the nappe. Kinematic indicators in both nappes are related to movement on the Selimiye shear zone and consistently show a top‐S shear sense. Metamorphic grade in the Selimiye nappe decreases structurally upwards as indicated by mineral isograds defining the garnet‐chlorite zone at the base, the chloritoid‐biotite zone and the biotite‐chlorite zone at the top of the nappe. The mineral isograds in the Selimiye nappe run parallel to the regional S_R foliation, parallel the Selimiye shear zone and indicate that the Selimiye shear zone formed during this prograde greenschist to lower amphibolite facies metamorphic event but remained active after the peak of metamorphism. ⁴⁰Ar/³⁹Ar mica ages and the tectonometamorphic relationship with the Eocene Cyclades–Menderes thrust, which occurs above the Selimiye nappe in the study area, suggests an Eocene age of metamorphism in the Selimiye nappe. Metasedimentary rocks of the Çine nappe 20–30 km north of the Selimiye shear zone record maximum P–T conditions of 8–11 kbar and 600–650 °C. An age of about 550 Ma is indicated for amphibolite facies metamorphism and associated top‐N shear in the orthogneiss of the Çine nappe. Our study shows that simple monophase tectonometamorphic fabrics do not always indicate a simple orogenic development of a nappe stack. Preservation in some areas and complete overprinting of those fabrics in other areas apparently occur very heterogeneously.     

Metamorphic petrology and zircon geochronology of high-grade rocks from the central Mozambique Belt of Tanzania: crustal recycling of Archean and Palaeoproterozoic material during the Pan-African orogeny

New data on the metamorphic petrology and zircon geochronology of high‐grade rocks in the central Mozambique Belt (MB) of Tanzania show that this part of the orogen consists of Archean and Palaeoproterozoic material that was structurally reworked during the Pan‐African event. The metamorphic rocks are characterized by a clockwise P–T path, followed by strong decompression, and the time of peak granulite facies metamorphism is similar to other granulite terranes in Tanzania. The predominant rock types are mafic to intermediate granulites, migmatites, granitoid orthogneisses and kyanite/sillimanite‐bearing metapelites. The meta‐granitoid rocks are of calc‐alkaline composition, range in age from late Archean to Neoproterozoic, and their protoliths were probably derived from magmatic arcs during collisional processes. Mafic to intermediate granulites consist of the mineral assemblage garnet–clinopyroxene–plagioclase–quartz–biotite–amphibole ± K‐feldspar ± orthopyroxene ± oxides. Metapelites are composed of garnet‐biotite‐plagioclase ± K‐feldspar ± kyanite/sillimanite ± oxides. Estimated values for peak granulite facies metamorphism are 12–13 kbar and 750–800 °C. Pressures of 5–8 kbar and temperatures of 550–700 °C characterize subsequent retrogression to amphibolite facies conditions. Evidence for a clockwise P–T path is provided by late growth of sillimanite after kyanite in metapelites. Zircon ages indicate that most of the central part of the MB in Tanzania consists of reworked ancient crust as shown by Archean (c. 2970–2500 Ma) and Palaeoproterozoic (c. 2124–1837 Ma) protolith ages. Metamorphic zircon from metapelites and granitoid orthogneisses yielded ages of c. 640 Ma which are considered to date peak regional granulite facies metamorphism during the Pan‐African orogenic event. However, the available zircon ages for the entire MB in East Africa and Madagascar also document that peak metamorphic conditions were reached at different times in different places. Large parts of the MB in central Tanzania consist of Archean and Palaeoproterozoic material that was reworked during the Pan‐African event and that may have been part of the Tanzania Craton and Usagaran domain farther to the west.     

对目前岩石“全曲线”测试的若干看法

从电液伺服岩石压力试验机工作机理的角度,对目前岩石应力-应变全过程曲线(以下简称“全曲线”)测试中的一些问题进行了分析,提出了自己的看法,目的是为了解决“全曲线”测试的2个问题,即如何测出“全曲线”;如何使测出的“全曲线”真实反映岩石的力学特性,并将其用到工程中。     

止水帷幕在高层建筑深基坑中的应用

某高层建筑基坑西侧紧邻一道河沟,水量较大,采取三重管高压摆喷帷幕止水[1～4],施工完成后通过监测,未发现渗漏、地下水位明显下降和周围建筑物沉降现象。     

岩体断层基础加固与溶洞灌浆处理中的高压灌浆技术

阐述了在岩体断层加固和溶洞处理中的高压灌浆技术,分析了高压灌浆的作用机理,灌浆压力控制的方法,介绍了高压灌浆在水利枢纽工程上的应用效果。     

黄壁庄水库副坝塌坑Ⅳ76+1槽段安全监测

介绍了黄壁庄水库副坝塌坑Ⅳ76+1槽段进行的安全监测设计及根据此设计进行的安全监测实施,根据取得的监测资料解决了一直未能确定的主要变形地层的问题,为水库的加固施工和后期的运行安全提供了一定的依据。