复合注浆法在基础加固中的应用

复合注浆法是将静压注浆法和高压旋喷注浆法进行时序上的结合，分别发挥两种注浆加固方法各自的优点，又可克服各自的技术和工艺缺陷的一种基础加固新方法，它可以较好地对既有建筑物地基和新建建筑基础出现质量问题进行加固处理。简述了复合注浆法的加固作用机理、设计及计算模型，在此基础上通过工程实例介绍其施工技术并分析其加固效果和经济性。     

Dynamic theory of rigid-plasticity

This paper deals with an analysis method for the response and motion of soil-like rigid-plastic bodies under seismic loading conditions. A continuity condition to determine the acceleration distribution within the rigid-plastic body when the failure occurs during seismic motions is proposed. Combining this continuity condition of acceleration and the ‘Generalized Limit Equilibrium Method (GLEM)’, the responses of the earth structure during seismic motions as well as the permanent displacements can be obtained, where GLEM is one of the limit equilibrium methods proposed by the authors for static problems and providing the approximate solution for Kötter's equation. The theoretical formulation of the method, the illustrative examples, and some comparisons between the analytical and experimental results are demonstrated.     

Experimental and theoretical study of stability of dense hydrous magnesium silicates in the deep upper mantle

Fluid-undersaturated experiments were conducted to determine the phase relations in the simplified peridotite system MgO-SiO₂-H₂O (MSH) at 11.0-14.5 GPa and 800-1400 °C. Stability relations of dense hydrous magnesium silicates (DHMSs) under fluid-undersaturated conditions were experimentally examined. From the fluid-absent experimental results, we retrieved thermodynamic data for clinohumite, phase A, phase E, and hydrous wadsleyite, consistent with the published data set for dry mantle minerals. With this new data set, we have calculated phase equilibria in the MSH system including dehydration reactions. The dehydration reactions calculated with lower water activities of 0.68-0.60 match the fluid-present experiments of this study above 11.0 GPa and 1000 °C, indicating that considerable amounts of silicate component were dissolved into the fluid phase. The calculated phase equilibria illustrate the stability of the post-antigorite phase A-bearing assemblages. In the cold subducting slab peridotite, phase A + enstatite assemblage survives into the transition zone, whereas phase A + forsterite + enstatite assemblage forms hydrous wadsleyite at a much shallower depth of about 360-km. The slab is subducted with no dehydration reactions occurring when entering the transition zone. The phase equilibria also show the high temperature stability of phase E. Phase E is stable up to 1200 °C at 13.5 GPa, a plausible condition in the mantle of relatively low temperature, i.e., beneath subduction zones. Phase E is a possible water reservoir in the mantle as well as wadsleyite and ringwoodite.     

The impact of epistemic uncertainty on an earthquake loss model

Models capable of estimating losses in future earthquakes are of fundamental importance for emergency planners, for the insurance and reinsurance industries, and for code drafters. Constructing a loss model for a city, region or country involves compiling databases of earthquake activity, ground conditions, attenuation equations, building stock and infrastructure exposure, and vulnerability characteristics of the exposed inventory, all of which have large associated uncertainties. Many of these uncertainties can be classified as epistemic, implying—at least in theory—that they can be reduced by acquiring additional data or improved understanding of the physical processes. The effort and cost involved in refining the definition of each component of a loss model can be very large, for which reason it is useful to identify the relative impact on the calculated losses due to variations in these components. A mechanically sound displacement‐based approach to loss estimation is applied to a test case of buildings along the northern side of the Sea of Marmara in Turkey. Systematic variations of the parameters defining the demand (ground motion) and the capacity (vulnerability) are used to identify the relative impacts on the resulting losses, from which it is found that the influence of the epistemic uncertainty in the capacity is larger than that of the demand for a single earthquake scenario. Thus, the importance of earthquake loss models which allow the capacity parameters to be customized to the study area under consideration is highlighted. Copyright © 2005 John Wiley & Sons, Ltd.     

致密砂岩的形成机制及其地质意义——以塔里木盆地英南2井为例

砂质岩的孔隙和喉道被网格状粘土矿物和次生加大矿物充填成微细孔喉状结构时,形成具有较高毛细管压力的致密砂岩。它与地层水发生水锁效应,可大大降低渗透率,成为致密砂岩盖层。当含水饱和度在50%以下时,束缚水饱和度比较低,致密砂岩储层可以产气;当含水饱和度在50%～90%区间时,具有较高的束缚水饱和度,相对渗透率非常低,它既不能产气也不能产水,反映为渗透率瓶颈区(具有盖层性质);当含水饱和度大于90%以上时,致密砂岩储层仅微量产水。塔里木盆地英南2井侏罗系气藏盖层由致密砂岩构成,不含水时的气体渗透率在(0.027～0.081)×10-3μm2,不能构成封堵;当含水饱和度达到60%以上时,相对渗透率几乎为零,构成有效盖层。     

Annihilation of both place and sense of place: the experience of the Cheslatta T'En Canadian First Nation within the context of large-scale environmental projects

The water resources of Canada are today, and have always been, of major importance to the welfare of Canadians. Throughout most of Canada's history, these resources have been viewed within a supply–management framework and, frequently, exploited through the construction of 'megaprojects', often with little or no concern for issues such as environmental harm and social and community disruption. As in many parts of the world, those most affected by such large-scale water resource developments have been aboriginals (in Canada, 'First Nations' peoples). Although the issues of environmental, social and economic damage to First Nations as a result of water megaprojects have been investigated, little has been written about the impact of such projects – especially dam construction – on the loss of sense of place of deracinated peoples. This paper investigates one example of such loss of sense of place, that of the Cheslatta T'En forcibly removed from their ancestral lands in the 1950s so as to allow for the construction of a private hydroelectric dam by the Aluminum Company of Canada (Alcan).     

Primary Ore Mineral Assemblage and Fluid Inclusion Study of the Batu Hijau Porphyry Cu-Au Deposit, Sumbawa, Indonesia

Abstract. The Batu Hijau porphyry Cu‐Au deposit, Sumbawa Island, Indonesia, is associated with a tonalitic intrusive complex. The temperature‐pressure condition of mineralization at the Batu Hijau deposit is discussed on the basis of fluid inclusion microthermometry. Then, the initial Cu‐Fe sulfide mineral assemblage is discussed. Bornite and chalcopyrite are major copper ore minerals associated with quartz veinlets. The quartz veinlets have been classified into ‘A’ veinlets associated with bornite, digenite, chalcocite and chalcopyrite, ‘B’ veinlets having chalcopyrite bornite along vuggy center‐line, rare ‘C’ chalcopyrite‐quartz veinlets, and late ‘D’ veinlets consisting of massive pyrite and quartz (Clode et al., 1999). Copper and gold mineralization is associated with abundant ‘A’ quartz veinlets. Abundant fluid inclusions are found in veinlet quartz consisting mainly of gas‐rich inclusions and polyphase inclusions throughout the veinlet types. The hydrothermal activity occurred in temperature‐pressure conditions of aqueous fluid immiscibility into hypersaline brine and dilute vapor. The halite dissolution (Tm[halite]) and liquid‐vapor homogenization (Th) temperatures of the polyphase inclusions in veinlet quartz range from 270 to 472d?C and from 280 to 454d?C, respectively. The estimated salinity ranges from 36 to 47 wt% (NaCl equiv.). The apparent pressures lower than 300 bars are estimated to have been along the liquid‐vapor‐halite curve for the fluid inclusions having the Th lower than the Tm that trapped the brine saturated with halite, or at slightly higher pressure relative to liquid‐vapor‐halite curve for the fluid inclusions having the Th higher than the Tm that trapped the brine unsaturated with halite. The actual temperature and pressure during the hydrothermal activity at the Batu Hijau deposit are estimated to have been around 300d?C and 50 bars. At such temperature‐pressure conditions, the principal and initial Cu‐Fe sulfide mineral assemblages are thought to be chalcopyrite + bornite solid solution (bnss) for the chalcopyrite‐bearing assemblage, and chalcocite‐digenite solid solution and bnss for the chalcopyrite‐free assemblage.     

Geologic and geotechnical effects of an impact caused by an airplane crash

A Turkish Airlines (THY) Boeing 737-400 plane crashed into alluvial soils creating an approximately 13 m deep and 30 m wide crater near the village of Adatepe, Ceyhan in southern Turkey. Effects of the impact on the soils in and around the crater were investigated from both the geological and soil mechanics point of view.

The results show that the impact caused severe deformations in the soils in and around the crater. The soils deformed similar to metamorphic rocks seen at many terrestrial hypervelocity impact craters around the world and became overconsolidated up to a distance of about 10 m from the crater wall as a result of the impact.

Also, the crash was recorded as a 2.7 magnitude earthquake by a nearby microtremor seismograph which provided both the location (epicenter) and time of the crash which was not known immediately after the crash.     

事故经济损失评估方法及计算机程序设计

分析了事故的后果和经济损失,详细论述了由于生产活动的中止和人的死亡或劳动能力的丧失而导致的生产活动中劳动力资源损失的计算方法,并应用面向对象的数据库系统Cache′和Delphi开发工具编写了事故经济损失计算程序,以货币形式给出了每个损失点的损失大小并输出可能损失的报告书,为事故管理、安全决策和风险评估提供了科学的依据.