夏季东海西部表层海水中的pCO2及海-气界面通量

根据2001年夏季长江口及东海西部海域表层海水pCO     

波浪作用下海床的有效应力分析

波浪作用下海床的稳定性分析是海洋工程地质评价的重要内容。海床的稳定性可通过计算分析其随时间变化的有效应力场来评估。本文建议了一个周期荷载作用下土体的本构模型 ,并用于计算波浪作用下海床的应力与变形。采用Biot固结理论和有限单元法 ,分析了海床的动态应力场与孔隙水压力场。波浪作用下两种渗透系数时有效应力的动态变化过程结果对比 ,反映了渗透消散作用对海床有效应力变化的影响     

基于神经网络的平底结构砰击压力预报

对利用神经网络预报平底结构入水砰击压力的方法进行了探讨。首先利用仿真软件计算各种情况下平底结构入水所产生的砰击压力，以此形成训练神经网络的数据集。其次利用数据集对三层反馈式网络进行了训练，讨论了不同隐含层节点数对该非线性系统的拟合能力，并且对梯度下降法、动量修正法和基于优化的LM算法的有效性和精度进行了比较，最后得出了适合平底结构入水砰击系统的网络结构。     

Plastic buckling of ring-stiffened conical shells under external hydrostatic pressure

The paper describes experimental tests carried out on three ring-stiffened cones that were tested to destruction under external hydrostatic pressure. The cones were carefully machined from EN1A Steel. All three cones failed by plastic non-symmetric bifurcation buckling in a mode commonly known as general instability. In this mode the entire ring-shell combination buckles bodily.The paper also provides a design chart using the results obtained from these three vessels, together with the results of six other vessels obtained from other tests. The design chart allows the possibility of obtaining a plastic knock down factor, so that the theoretical buckling pressures, based on elastic theory, can be divided by the plastic knockdown factor, to give the predicted buckling pressure. This method can also be used for the design of full-scale vessels.     

Stability of waterfront retaining wall subjected to pseudo-static earthquake forces

Waterfront retaining walls supporting dry backfill are subjected to hydrostatic pressure on upstream face and earth pressure on the downstream face. Under seismic conditions, if such a wall retains a submerged backfill, additional hydrodynamic pressures are generated. This paper pertains to a study in which the effect of earthquakes along with the hydrodynamic pressure including inertial forces on such a retaining wall is observed. The hydrodynamic pressure is calculated using Westergaard's approach, while the earth pressure is calculated using Mononobe-Okabe's pseudo-static analysis. It is observed that when the horizontal seismic acceleration coefficient is increased from 0 to 0.2, there is a 57% decrease in the factor of safety of the retaining wall in sliding mode. For investigating the effect of different parameters, a parametric study is also done. It is observed that if φ is increased from 30° to 35°, there is an increase in the factor of safety in the sliding mode by 20.4%. Similar observations were made for other parameters as well. Comparison of results obtained from the present approach with [Ebeling, R.M., Morrison Jr, E.E., 1992. The seismic design of waterfront retaining structures. US Army Technical Report ITL-92-11. Washington DC] reveal that the factor of safety for static condition (k_h=0), calculated by both the approaches, is 1.60 while for an earthquake with k_h=0.2, they differ by 22.5% due to the consideration of wall inertia in the present study.     

桩式离岸堤保滩促淤工程消浪效果试验研究

在上海奉贤南北港保滩促淤工程中，采用了一种新型结构型式－桩式离岸堤，并通过物理模式试验进行了桩式离岸堤消浪效果研究。针对离岸堤通常建于近岸水区破波带的特点，重点研究水深，堤高以及堤身结构对波浪衰减的影响，同时对桩式离岸堤堤后水域的波浪底流速 分析探讨。研究结果表明，桩式离岸堤不仅具有良好的消浪效果。而且可在较大范围内改变波态，即由引起水体剧烈紊动的破波转变为浅水推进波，从而有效地改善海滩上的动力条件，促进海滩免受侵蚀，是一种具有广泛应用前景和新型保滩促淤结构。     

威海地区高压岩石组合及其成因演化

利用矿物地质温压计估算变质高峰期温压条件、退变质作用温压条件。研究表明,本区为鲁苏构造带的北延部分,代表本区晚元古代华南陆块与华北陆块的碰撞及三叠纪华北陆块向华南陆块推覆事件的发生和演化。     

The buckling of plastic oblate hemi-ellipsoidal dome shells under external hydrostatic pressure

The paper presents a theoretical and an experimental investigation into the buckling of seven oblate hemi-ellipsoidal dome shells under external hydrostatic pressure. Four of the shells were made in glass reinforced plastic and three were made from a thermosetting plastic called solid urethane plastic. All the vessels were tested to destruction. The theoretical study was made with the aid of a non-linear finite element solution, where both geometrical and material non-linearity were allowed for. Good agreement was found between experiment and theory for all the vessels. The very oblate domes failed axisymmetrically. Theoretical convergence was good for the more oblate domes but it was not as good as for the less oblate domes. This may have been because the less oblate domes did not fail in a classical axisymmetric manner as was expected. This work is of much importance in ocean engineering.     

Analysis of seabed instability using element free Galerkin method

Wave-induced seabed instability, either momentary liquefaction or shear failure, is an important topic in ocean and coastal engineering. Many factors, such as seabed properties and wave parameters, affect the seabed instability. A non-dimensional parameter is proposed in this paper to evaluate the occurrence of momentary liquefaction. This parameter includes the properties of the soil and the wave. The determination of the wave-induced liquefaction depth is also suggested based on this non-dimensional parameter. As an example, a two-dimensional seabed with finite thickness is numerically treated with the EFGM meshless method developed early for wave-induced seabed responses. Parametric study is carried out to investigate the effect of wavelength, compressibility of pore fluid, permeability and stiffness of porous media, and variable stiffness with depth on the seabed response with three criteria for liquefaction. It is found that this non-dimensional parameter is a good index for identifying the momentary liquefaction qualitatively, and the criterion of liquefaction with seepage force can be used to predict the deepest liquefaction depth.     

Influence of large-diameter pipe pile driving on surrounding marine soils and adjacent submarine pipelines

Abstract

With the large-scale development and utilization of ocean resources and space, it is inevitable to encounter existing submarine facilities in pile driving areas, which necessitates a safety assessment. In this article, by referring to a wharf renovation project as a reference, the surrounding soil response and buried pipe deformation during pile driving in a near-shore submarine environment are investigated by three-dimensional (3D) numerical models that consider the pore water effect. Numerical studies are carried out in two different series: one is a case of a single pile focusing on the effect of the minimum plane distance of the pile–pipe, and the other is a case of double piles focusing on the effect of the pile spacing.