钻孔灌注桩后压浆作用机理与应用

通过对桩侧和桩底后压浆,可大幅度提高钻孔灌注桩单桩承载力.应用桩-土理论分析了后压浆中浆液对土体及桩体的作用,并从分析影响桩基承载力的因素出发,研究了后压浆的作用机理.在渗透率小的地层中后压浆以压密注浆为主,在渗透率大的地层中后压浆以渗透注浆为主.为避免过分压裂土层,在压浆过程中应控制灌浆压力.压浆量是影响后压浆质量和提高单桩承载力的关键因素之一.     

Mineralogy and geochemistry of a Late Permian coal in the Dafang Coalfield, Guizhou, China: influence from siliceous and iron-rich calcic hydrothermal fluids

This paper describes the influence of siliceous and iron-rich calcic low-temperature hydrothermal fluids (LTHF) on the mineralogy and geochemistry of the Late Permian No. 11 Coal (anthracitic, R_r=2.85%) in the Dafang Coalfield in northwestern Guizhou Province, China. The No. 11 Coal has high contents of vein ankerite (10.2 vol.%) and vein quartz (11.4 vol.%), with formation temperatures of 85 and 180 °C, respectively, indicating that vein ankerite and vein quartz were derived from low-temperature calcic and siliceous hydrothermal fluids in two epigenetic episodes. The vein quartz appears to have formed earlier than vein ankerite did, and at least three distinct stages of ankerite formation with different Ca/Sr and Fe/Mn ratios were observed.The two types of mineral veins are sources of different suites of major and trace metals. Scanning electron microscope and sequential extraction studies show that, in addition to Fe, Mg, and Ca, vein ankerite is the dominant source of Mn, Cu, Ni, Pb, and Zn in the coal, and the contents of these five elements are as high as 0.09% and 74.0, 33.6, 185, and 289 μg/g, respectively. In contrast, vein quartz is the main carrier mineral for platinum-group elements (PGEs) Pd, Pt, and Ir in the coal, and the contents of Pd, Pt, and Ir are 1.57, 0.15, and 0.007 μg/g, respectively. Sequential extraction showed a high PGE content in the silicate fraction, up to 10.4 μg/g Pd, 1.23 μg/g Pt, and 0.05 μg/g Ir, respectively. It is concluded that the formation of ankerite and quartz and the anomalous enrichment of trace elements in the No. 11 Coal in the Dafang Coalfield, Guizhou, result from the influx of calcic and siliceous low-temperature hydrothermal fluids.     

箱形基础上浮病害整治技术

结合箱形基础不均匀上浮工程病害实例，综合分析了病害原因，提出了应用高压灌浆和抗浮锚杆工艺进行处治的方案。     

乌江渡水电站岩溶地区高压灌浆施工特殊情况的处理

乌江渡水电站扩机地下厂房防渗帷幕工程身处岩溶发育地区，工程地质条件复杂，地质构造以层间错动断层为主，并有部分陡倾角断层发育,岩层受构造挤压强烈，断层、节理、破碎带发育；水平岩溶、垂直岩溶发育。以此工程为例介绍了高压灌浆施工工艺，阐述了岩溶地区高压灌浆过程中出现的特殊问题并提出了处理措施。     

沉管灌注桩大面积断桩原因分析

通过2个工程实例分析了沉管灌注桩出现大面积断桩的原因是由于后期基坑开挖不当造成的，并提出了预防断桩出现的一些措施以及对断桩的处理补救措施。     

浙江江山石鼓水库除险加固工程技术措施

根据浙江江山石鼓水库大坝的结构构造特点、水库地质条件以及水库病险原因与状况，制定出一套科学完善的病险水库除险加固工程技术措施和施工操作规程，对病险水库进行了全面彻底治理，并取得良好效果。详细介绍了工程病险状况，除险加固方案设计，施工工艺及操作规程，加固效果检测及评价等。     

广西百色水电站边坡治理工程

文章通过广西右江百色水利枢纽地下发电厂房进水口与尾水洞高边坡的治理，介绍在此工程中具有特殊性的一些施工方法。该工程地质体为弱风化硅质泥岩夹泥化夹层、强风化含洞穴硅质泥岩石、强风化硅质岩及全强风化辉绿岩，地质条件非常复杂，对坡体的稳定极其不利。根据三维有限元的分析计算和国内有关权威专家的调查研究需施工1500kN、1000kN的锚索方能保证坡体的永久稳定。大吨位的锚索需锚固在强风化岩土体上，锚索设计采用能提高锚固力的防腐型压力分散锚索。通过现场锚索基本试验，其锚固力完全能满足工程需要。为保证进水口总体施工的进度，在施工进水口约30m高的垂直壁上的锚索时，笔者采用了通常施工中较少采用的垂直壁悬吊式施工法，满足了水电站的整体施工进度和要求。     

云南个（旧）-冷（墩）公路K22＋336回头湾段边坡治理工程研究

目前，在我国地质灾害防治及道路建设工程中，岩土锚固施工大多采用单一的拉力型锚索工法。一般锚索索体的长效防腐问题没有得到应有的重视。文章对云南省个旧-冷墩公路边坡工程中所采用的压力分散型锚索工法从设计、试验及成功应用等多方面进行了详细介绍。①在一些复杂地形条件下，锚索防护方案有其独特的经济实用性。②在地基承载力较低的软弱地层中，常用的拉力型锚索无法提供防护工程所需的大吨位锚固力。而有多个受力体的压力分散型锚索则因其对锚固段全长范围内地基承载力的充分利用来提供较大吨位的锚固力；③永久锚索防护工程作为一项具有隐蔽性强特点的结构工程，为保证在其报务年限内锚索能够可靠地工作，在设计阶段，锚索体的长效防腐应为不能忽略的主要考虑因素。在该工程中首次应用了新型高强材料——环氧全喷涂无粘结钢绞线作为锚索体的杆材，较好地解决了永久锚固工程中的锚索防腐问题。     

Polymorphic phase transition in Superhydrous Phase B

We synthesized superhydrous phase B (shy-B) at 22 GPa and two different temperatures: 1200°C (LT) and 1400°C (HT) using a multi-anvil apparatus. The samples were investigated by transmission electron microscopy (TEM), single crystal X-ray diffraction, Raman and IR spectroscopy. The IR spectra were collected on polycrystalline thin-films and single crystals using synchrotron radiation, as well as a conventional IR source at ambient conditions and in situ at various pressures (up to 15 GPa) and temperatures (down to −180°C). Our studies show that shy-B exists in two polymorphic forms. As expected from crystal chemistry, the LT polymorph crystallizes in a lower symmetry space group (Pnn2), whereas the HT polymorph assumes a higher symmetry space group (Pnnm). TEM shows that both modifications consist of nearly perfect crystals with almost no lattice defects or inclusions of additional phases. IR spectra taken on polycrystalline thin films exhibit just one symmetric OH band and 29 lattice modes for the HT polymorph in contrast to two intense but asymmetric OH stretching bands and at least 48 lattice modes for the LT sample. The IR spectra differ not only in the number of bands, but also in the response of the bands to changes in pressure. The pressure derivatives for the IR bands are higher for the HT polymorph indicating that the high symmetry form is more compressible than the low symmetry form. Polarized, low-temperature single-crystal IR spectra indicate that in the LT-polymorph extensive ordering occurs not only at the Mg sites but also at the hydrogen sites.     

Statistical identification of orographic effects in the regional analysis of extreme rainfall

Regional models of extreme rainfall must address the spatial variability induced by orographic obstacles. However, the proper detection of orographic effects often depends on the availability of a well‐designed rain gauge network. The aim of this study is to investigate a new method for identifying and characterizing the effects of orography on the spatial structure of extreme rainfall at the regional scale, including where rainfall data are lacking or fail to describe rainfall features thoroughly. We analyse the annual maxima of daily rainfall data in the Campania region, an orographically complex region in Southern Italy, and introduce a statistical procedure to identify spatial outliers in a low order statistic (namely the mean). The locations of these outliers are then compared with a pattern of orographic objects that has been a priori identified through the application of an automatic geomorphological procedure. The results show a direct and clear link between a particular set of orographic objects and a local increase in the spatial variability of extreme rainfall. This analysis allowed us to objectively identify areas where orography produces enhanced variability in extreme rainfall. It has direct implications for rain gauge network design criteria and has led to promising developments in the regional analysis of extreme rainfall. Copyright © 2015 John Wiley & Sons, Ltd.