Risk analysis of landslides – A case study

The effects of uncertainty due to the variability of soil parameters on the risk of landsliding in the Himalayan region are investigated using a random field model combined with slope stability analyses. Effects of spatial variability both in horizontal and vertical directions, number of test samples, variations in piezometric level and the influence of earthquake on the reliability of a typical slope in a slide area are investigated. The results show that the reliability of slopes in the slide area is significantly affected by the coefficients of variation of soil parameters, spatial variations of soil parameters, number of test samples and piezometric variations. The results also show that the assumption of isotropic variations to assess slope reliability isconservative. The results of the study are useful in providing guidelines and pointing to remedial measures in the form of sub-surface drainage to improve slope reliability in the area.     

Compression mechanisms of coesite

 The structure of coesite has been determined at ten pressures up to a maximum of 8.68 GPa by single-crystal X-ray diffraction. The dominant mechanism of compression is the reduction of four of the five independent Si–O–Si angles within the structure. There is no evidence of the fifth linkage, Si1–O1–Si1, deviating from 180°. Some Si–O bond distances also decrease by up to 1.6% over the pressure range studied. The pattern of Si–O–Si angle reduction amounts to a rotation of the Si2 tetrahedron around the [001] direction. This rotation induces significant internal deformation of the Si1 tetrahedron. Comparison of the experimental data with rigid-unit distance least-squares simulations of coesite suggests that this pattern of compression, the anomalous positive values of both s₂₃ and K′′ in the equation of state of coesite, its high elastic anisotropy and the unusual straight Si1–O1–Si1 linkage within the structure are all consequences of the connectivity of the tetrahedral framework. Received: 11 July 2002 / Accepted: 14 January 2003 Acknowledgements The help of Christian Baerlocher of ETH Zurich in providing both the DLS-76 software and advice in its use is gratefully acknowledged, as are discussions with Paul Ribbe of Virginia Tech and the comments of two anonymous reviewers. The data analysis was supported by the National Science Foundation under grant EAR-0105864 to N.L. Ross and R.J. Angel.     

Atomistic simulation of the structure and elastic properties of pyrite (FeS2) as a function of pressure

Interatomic potential parameters have been derived at simulated temperatures of 0 K and 300 K to model pyrite FeS₂. The predicted pyrite structures are within 1% of those determined experimentally, while the calculated bulk modulus is within 7%. The model is also able to simulate the properties of marcasite, even though no data for this phase were included in the fitting procedure. There is almost no difference in results obtained for pyrite using the two potential sets; however, when used to model FeS₂ marcasite, the potential fitted at 0 K performs better. The potentials have also been used to study the high-pressure behaviour of pyrite up to 44 GPa. The calculated equation of state gives good agreement with experiment and shows that the Fe–S bonds shorten more rapidly that the S–S dimer bonds. The behaviour of marcasite at high pressure is found to be similar to that of pyrite.     

Petrological and geochronological constraints on high pressure, high temperature metamorphism in the Snowbird tectonic zone, Canada

The upper deck of the East Athabasca mylonite triangle (EAmt), northern Saskatchewan, Canada, contains mafic granulites that have undergone high P–T metamorphism at conditions ranging from 1.3 to 1.9 GPa, 890–960 °C. Coronitic textures in these mafic granulites indicate a near‐isothermal decompression path to 0.9 GPa, 800 °C. The Godfrey granite occurs to the north adjacent to the upper deck high P–T domain. Well‐preserved corona textures in the Godfrey granite constrain igneous crystallization and early metamorphism in the intermediate‐pressure granulite field (Opx + Pl) at 1.0 GPa, 775 °C followed by metamorphism in the high pressure granulite field (Grt + Cpx + Pl) at 1.2 GPa, 860 °C. U–Pb geochronology of zircon in upper deck mafic granulite yields evidence for events at both c. 2.5 Ga and c. 1.9 Ga. The oldest zircon dates are interpreted to constrain a minimum age for crystallization or early metamorphism of the protolith. A population of 1.9 Ga zircon in one mafic granulite is interpreted to constrain the timing of high P–T metamorphism. Titanite from the mafic granulites yields dates ranging from 1900 to 1894 Ma, and is interpreted to have grown along the decompression path, but still above its closure temperature, indicating cooling following the high P–T metamorphism from c. 960–650 °C in 4–10 Myr. Zircon dates from the Godfrey granite indicate a minimum crystallization age of 2.61 Ga, without any evidence for 1.9 Ga overgrowths. The data indicate that an early granulite facies event occurred at c. 2.55–2.52 Ga in the lower crust (c. 1.0 GPa), but at 1.9 Ga the upper deck underwent high P–T metamorphism, then decompressed to 0.9–1.0 GPa. Juxtaposition of the upper deck and Godfrey granite would have occurred after or been related to this decompression. In this model, the high P–T rocks are exhumed quickly following the high pressure metamorphism. This type of metamorphism is typically associated with collisional orogenesis, which has important implications for the Snowbird tectonic zone as a fundamental boundary in the Canadian Shield.     

对目前岩石“全曲线”测试的若干看法

从电液伺服岩石压力试验机工作机理的角度,对目前岩石应力-应变全过程曲线(以下简称“全曲线”)测试中的一些问题进行了分析,提出了自己的看法,目的是为了解决“全曲线”测试的2个问题,即如何测出“全曲线”;如何使测出的“全曲线”真实反映岩石的力学特性,并将其用到工程中。     

止水帷幕在高层建筑深基坑中的应用

某高层建筑基坑西侧紧邻一道河沟,水量较大,采取三重管高压摆喷帷幕止水[1～4],施工完成后通过监测,未发现渗漏、地下水位明显下降和周围建筑物沉降现象。     

岩体断层基础加固与溶洞灌浆处理中的高压灌浆技术

阐述了在岩体断层加固和溶洞处理中的高压灌浆技术,分析了高压灌浆的作用机理,灌浆压力控制的方法,介绍了高压灌浆在水利枢纽工程上的应用效果。     

黄壁庄水库副坝塌坑Ⅳ76+1槽段安全监测

介绍了黄壁庄水库副坝塌坑Ⅳ76+1槽段进行的安全监测设计及根据此设计进行的安全监测实施,根据取得的监测资料解决了一直未能确定的主要变形地层的问题,为水库的加固施工和后期的运行安全提供了一定的依据。     

俯伪斜分段密集采煤法三维有限元数值模拟研究

俯伪斜分段密集采煤法,作为一种较新的采煤方法,在我国技术上还不很成熟,因此,首次针对京煤集团木城涧矿大台井的地质条件和赋煤状况,通过简化建立三维立体有限元模型,模拟计算了该矿煤层顶底板在开采前后运动变化情况。结果表明:煤层倾角、推采距离和开采巷道数三者是影响煤层顶底板运动规律的重要因素,得到了表征顶底板运动规律的顶底板法向最大应力和法向最大位移与三影响因素关系曲线,详细阐述了三影响因素下的煤层顶底板运动规律;同时,对现场开采中支撑压力大小,特别是在三影响因素下,超前支撑压力的作用范围与应力峰值位置进行了数值计算,并总结了其影响规律;最后,指出了该数值分析方法对现场开采将具有十分重要的应用价值和指导意义。     

基桩缺陷逐步能量恢复递推定量分析

通过大量正演计算,对不同桩周土条件下缺陷程度与时域速度响应波形中入射波波幅与反射波波幅的比值进行了相关性分析,拟合出桩侧土为粘土、砂土、粉土条件下桩径变化程度与波幅比之间的关系式。通过理论分析,在基桩存在多缺陷时,导出了缩颈与扩颈对下一个缺陷引起的反射波幅值的影响系数,进而,提出了逐步能量恢复递推缺陷程度的理论与方法,在时间域中,实现了基桩存在多缺陷时的低应变动测缺陷量化分析。模型桩试验分析结果表明,缺陷量化分析方法可取得显著效果。