输电线路抢修塔拉线基础的优化设计

通过分析以往地锚结构设计方法的不足,研究输电线路抢修塔拉线基础的优化设计方法。运用现行杆塔基础设计理论建立数学优化模型,应用MATLAB优化工具箱,编制地锚结构优化程序,设计出输电线路抢修塔最安全,经济,合理的基础型式。此优化方法可以在目前输电线路拉线基础中推广使用,并发挥其显著的经济效应和社会效益。     

双翼弧平式长螺旋锚杆成孔钻具工艺技术研究

通过对以往黏性土层锚杆钻具成孔出现的问题分析,查明了常规取芯钻具与短螺旋钻具在水平方向小角度成孔过程中,土体失去了原始均衡应力造成钻孔缩径,使扰土不能及时输出孔外,是产生堵孔塌孔的直接原因.为此研制了长螺旋锚杆成孔钻具,解决了成孔时扰土输出问题,创新的旋板解决了钻孔内壁土颗粒结构松弛问题,并且彻底解决了在黏性土层中锚杆成孔塌堵现象,保证锚杆成孔设计角度,形成一套较为标准的长螺旋锚杆钻具成孔操作规则.     

基于半数值方法的限弯器剪弯刚度分析

柔性管缆限弯器存在接触非线性导致剪弯刚度分析困难。为此先基于悬臂梁方程建立剪弯刚度理论模型;然后构建考虑接触边界的锁合结构数值模型,得到其扭转刚度曲线;最后结合理论分析和数值计算求得考虑接触非线性的限弯器剪弯刚度曲线,并同传统的整体数值方法相比较,验证该半数值分析方法的有效性。对比发现基于半数值方法的限弯器剪弯计算效率远高于传统数值方法,其结果误差也满足工程需求;并且限弯器锁合结构处受接触边界影响有明显的非线性;限弯器子梁这一短梁结构基于Timoshenko梁理论计算的结果精度更高也更保守。相较于传统数值方法,该半数值方法用方程直接表达部分参数与剪弯刚度关系,并可以高效地分析限弯器剪弯刚度,使设计工作更加高效。     

Uplift of symmetrical anchor plates by using grid-fixed reinforced reinforcement in cohesionless soil

Uplift response of symmetrical anchor plates with and without grid fixed reinforced （GFR） reinforcement was evaluated in model tests and numerical simulations by Plaxis. Many variations of reinforcement layers were used to reinforce the sandy soil over symmetrical anchor plates. In the current research, different factors such as relative density of sand, embedment ratios, and various GFR parameters including size, number of layers, and the proximity of the layer to the symmetrical anchor plate were investigated in a scale model. The failure mechanism and the associated rupture surface were observed and evaluated. GFR, a tied up system made of fiber reinforcement polymer （FRP） strips and end balls, was connected to the geosynthetic material and anchored into the soil. Test results showed that using GFR reinforcement significantly improved the uplift capacity of anchor plates. It was found that the inclusion of one layer of GFR, which rested directly on the top of the anchor plate, was more effective in enhancing the anchor capacity itself than other methods. It was found that by including GFR the uplift response was improved by 29%. Multi layers of GFR proved more effective in enhancing the uplift capacity than a single GFR reinforcement. This is due to the additional anchorage provided by the GFR at each level of reinforcement. In general, the results show that the uplift capacity of symmetrical anchor plates in loose and dense sand can be significantly increased by the inclusion of GFR. It was also observed that the inclusion of GFR reduced the requirement for a large L/D ratio to achieve the required uplift capacity. The laboratory and numerical analysis results are found to be in agreement in terms of breakout factor and failure mechanism pattern.     

格构锚固技术及其在边坡防治中的应用

格构锚固是将护坡与支挡有机地结合在一起抗滑的一种新型支挡加固措施,它适合于疏松介质边坡的整治。其特点是施工时不需要大型机械,不必开挖扰动边坡,施工安全快速,与植被恢复相结合还可美化环境。以宕昌县民福村边坡为例,说明格构锚固在边坡防治应用中具有较好的效果。     

Large deformation dynamic analysis of saturated porous media with applications to penetration problems

This paper outlines the development as well as implementation of a numerical procedure for coupled finite element analysis of dynamic problems in geomechanics, particularly those involving large deformations and soil-structure interaction. The procedure is based on Biot’s theory for the dynamic behaviour of saturated porous media. The nonlinear behaviour of the solid phase of the soil is represented by either the Mohr Coulomb or Modified Cam Clay material model. The interface between soil and structure is modelled by the so-called node-to-segment contact method. The contact algorithm uses a penalty approach to enforce constraints and to prevent rigid body interpenetration. Moreover, the contact algorithm utilises a smooth discretisation of the contact surfaces to decrease numerical oscillations. An Arbitrary Lagrangian–Eulerian (ALE) scheme preserves the quality and topology of the finite element mesh throughout the numerical simulation. The generalised-α method is used to integrate the governing equations of motion in the time domain. Some aspects of the numerical procedure are validated by solving two benchmark problems. Subsequently, dynamic soil behaviour including the development of excess pore-water pressure due to the fast installation of a single pile and the penetration of a free falling torpedo anchor are studied. The numerical results indicate the robustness and applicability of the proposed method. Typical distributions of the predicted excess pore-water pressures generated due to the dynamic penetration of an object into a saturated soil are presented, revealing higher magnitudes of pore pressure at the face of the penetrometer and lower values along the shaft. A smooth discretisation of the contact interface between soil and structure is found to be a crucial factor to avoid severe oscillations in the predicted dynamic response of the soil.     

饱和粉细砂层锚索预应力变化规律监测分析

锚索的预应力损失在工程建设中不可忽视,工程的场地环境条件成为影响锚索预应力损失的主因。饱和粉细砂层较其他地质条件更为复杂敏感,更易引起锚索预应力值的损失。通过对廊坊市某深基坑工程锚索预应力值的实时监测,结合工程环境,分析饱和粉细砂层中造成锚索预应力值变化的原因。结果表明,施工过程、张拉过程以及环境因素都影响锚索预应力的变化,其中开挖过程的影响最明显,预应力值的变化率最大值达79.1%;瞬时卸载造成预应力值22.8%⁵9.2%的损失。对饱和粉细砂层中锚索预应力变化规律的研究分析结论可为类似地质环境的工程建设提供经验。     

玻璃纤维增强聚合物抗浮锚杆抗拔性能试验研究与机制分析

抗浮锚杆作为一种竖向锚固技术在我国许多地区广泛应用,锚杆作为抗浮结构的核心其性能受到极大关注。但因钢材易腐蚀,传统金属锚杆的耐久性受到质疑,特别是地铁等地下工程存在杂散电流,限制了金属抗浮锚杆的应用。玻璃纤维增强聚合物(GFRP)抗浮锚杆是一种由树脂基体和玻璃纤维复合而成的新材料,与金属锚杆相比,它具有耐腐蚀、抗拉强度高、自重轻等优良特性。通过植入式裸光纤传感测试技术对GFRP抗浮锚杆的界面应力分布、荷载传递规律及破坏机制进行了研究,论证了GFRP抗浮锚杆使用的适宜性。试验表明,GFRP抗浮锚杆破坏以杆体基体材料剪切破坏为主,?28 mm锚杆极限抗拔力为250 kN,能够满足工程需要;杆体轴力沿深度方向逐渐递减,并且超过一定长度后杆体不再受力。结果显示,中风化岩地区,当锚固段长度为3.95⁶.95 m时,轴力影响深度范围约为3.7 m,说明GFRP抗浮锚杆同样存在临界锚固深度问题。锚杆界面剪应力呈不均匀分布,剪应力峰值随荷载的增加逐渐向下转移,同时0值点也向杆体深部转移。研究成果可为GFRP抗浮锚杆应用于工程实际提供依据。     

全球海底光缆传输网络的节点职能与鲁棒性评价

海底光缆传输网络是全球信息传递和要素流动的重要基础设施支撑,国家或地区在全球海底光缆网络中的节点职能和对网络鲁棒性的影响事关国家信息通信安全。在此背景下,研究基于全球网络基础设施Infrapedia数据库,提取了1991—2017年近30年全球光缆分布数据,运用复杂网络分析方法,研究了不同国家或地区在全球光缆网络中承担“传输职能”和“枢纽职能”的特征及其演变,并探究了全球海底光缆网络的鲁棒性。研究发现：①国家或地区的信息传输职能和枢纽职能具有不同的模式;其中信息传输职能较为扁平化,且呈明显廊道格局,咽喉海峡沿线的国家或地区占据重要位置;信息枢纽职能具有明显的等级结构。②毗邻海峡的地缘战略位置、背靠强劲的国家实力、增长迅速的市场需求等共同塑造了全球海底光缆网络中的重要节点。③部分节点（尤其是高中间中心性的节点）发生故障会导致整个网络功能的大幅下降。研究从避免海底光缆链接的单一性、提升全球枢纽职能等方面提出了维护我国海底信息传输安全的启示。     

煤矿井下定向钻孔中电阻率探测技术与应用

受高瓦斯/承压奥灰水威胁的工作面开采前,一般采取定向钻进技术在工作面底板开展压裂或注浆工程保障开采安全。利用底板定向钻孔开展孔中探测工作,可更加精细揭露工作面内隐伏构造,还可实现“一孔多用”。为解决定向钻孔内的探测问题,提出一种在水平定向钻孔中进行直流电阻率法探查的方法。定向钻孔施工完毕后,退出定向钻孔施工的通缆钻杆,送入内平钻杆,将孔中高密度电缆通过钻杆尾端特制水便送入钻孔,使孔中电缆平铺于钻孔中,在定向钻孔水平段,进行孔内直流电阻率法径向探测。在理论上通过数值模拟研究层状介质下单孔测量工作模式的接收信号衰减规律、视电阻率曲线变化特征、顶底板岩性对测量结果的影响等,并采用单孔测量数据对孔旁异常范围进行反演定位。数值模拟研究表明,孔中电阻率探测方法对隐伏的异常体有良好的探测效果。通过在陕西韩城某矿井下实际煤层底板探测试验,对研究区2个定向抽采钻孔孔中探测数据进行处理,反演结果异常区与工作面内隐伏小断层位置吻合,验证了定向钻孔中电缆布置的可行性和定向钻孔内通过孔内径向和孔间透视探测隐伏构造的可靠性。