Plerospheres and their role in reduction of emitted fine fly ash particles

Particles, less than PM10 in size, emitted from the stack of pulverized coal-fired power plants are of environmental concern since they can easily enter the human respiratory track. These fine particles are examined by Scanning Electron Microscope/Electron Dispersive Spectrometry （SEM/EDX）. Plerospheres are found in fly ash and are particles containing smaller particles formed during combustion of coal. The large plerospheres 〉50 μm mostly are present in ESP fly ash, indicating that they are effectively capturing fine particles and reducing their stack emission.     

The seismic hazard assessment of the Dead Sea rift, Jordan

The Dead Sea fault system and its branching faults represent one of the most tectonically active regions in the Middle East. The aim of this study is to highlight the degree of hazards related to the earthquake activities associated with the Dead Sea rift, in terms of speculating the possible future earthquakes. The present investigation mainly is based on available data and vertical crustal modeling of Jordan and the Dead Sea model for the Dead Sea basin with particular emphasis of the recent earthquake activities, which occurred on December 31st, 2003 (Mc = 3.7), February 11th, 2004 (strongest Mc = 4.9 R), and March 15th, 2004 (Mc = 4). The present research examines the location of the strong events and correlates them with the various tectonic elements in the area. The source mechanism of the main shock and the aftershock events is also examined. The analyses were based on the available short period seismogram data, which was recorded at the Natural Resources Authority of Jordan, Seismological Observatory. The seismic energy appears to have migrated from the south to the north during the period from December 31st up to March 12th, where the released seismic energy showed a migration character to the southern block of the eastern side of the Dead Sea, which led the seismic event to occur on March 15th.     

A comparison of mud- and sand-dominated meanders in a downstream coarsening reach of the mixed bedrock-alluvial Klip River, eastern Free State, South Africa

Along a 28 km reach of the Klip River, eastern Free State, South Africa, mud- and sand-dominated meanders have developed in close proximity within a floodplain wetland up to 1.5 km wide, providing an unusual opportunity to compare their characteristics under similar hydrological conditions. Throughout the reach, the channel bed is grounded on sandstone/shale bedrock although the banks are alluvial, and most river activity occurs during summer high flows. The reach can be divided into three geomorphological zones: Zone 1 (0–11 km), a muddy proximal part with a single meandering channel (w/d < 10) and near-permanent standing water in oxbows and backswamps; Zone 2 (11–17.5 km), a transitional mud-to-sand part with one main channel (w/d  20–30), a number of sinuous palaeochannels and oxbows, and only limited standing water; and Zone 3 (17.5–28 km), a sandy distal part with a single meandering channel (w/d  15–30), scroll bars and oxbows, and little standing water. Each zone also has a distinctive sedimentology: Zone 1 is characterised by an  3–4 m thick succession of basal sand and minor granules overlain by dominantly muddy sediment deposited primarily by oblique accretion in meander bends; Zone 2 is characterised by < 4 m of interbedded sand and mud deposited primarily by lateral point-bar accretion, although a history of avulsions also attests to the importance of abandoned-channel accretion; and Zone 3 is characterised by < 3 m of dominantly sand deposited primarily by lateral point-bar accretion. This unusual downstream sediment coarsening trend, and the associated changes in channel and floodplain character, are independent of sediment inputs from tributaries, and result from a downstream increase in bankfull unit stream power from < 3.5 W m^− 2 (Zone 1) to  4–10 W m^− 2 (Zone 3). Mud is deposited primarily in low-energy Zone 1 but is conveyed in suspension more effectively through higher energy Zones 2 and 3, only forming drapes over sandy lateral accretion deposits during waning flood stages. The downstream increase in unit stream power is controlled in part by a slight downstream increase in floodplain gradient that may be related to a subtle variation in the erosional resistance of the bedrock underlying the channel bed. These findings add to previous work on meandering rivers by demonstrating that mud-dominated meanders can occur in long-term erosional settings where the channel bed is grounded on bedrock, and that downstream fining trends may be reversed locally.     

Net Energy Payback and CO2 Emissions from Three Midwestern Wind Farms: An Update

This paper updates a life-cycle net energy analysis and carbon dioxide emissions analysis of three Midwestern utility-scale wind systems. Both the Energy Payback Ratio (EPR) and CO₂ analysis results provide useful data for policy discussions regarding an efficient and low-carbon energy mix. The EPR is the amount of electrical energy produced for the lifetime of the power plant divided by the total amount of energy required to procure and transport the materials, build, operate, and decommission the power plants. The CO₂ analysis for each power plant was calculated from the life-cycle energy input data. A previous study also analyzed coal and nuclear fission power plants. At the time of that study, two of the three wind systems had less than a full year of generation data to project the life-cycle energy production. This study updates the analysis of three wind systems with an additional four to eight years of operating data. The EPR for the utility-scale wind systems ranges from a low of 11 for a two-turbine system in Wisconsin to 28 for a 143-turbine system in southwestern Minnesota. The EPR is 11 for coal, 25 for fission with gas centrifuge enriched uranium and 7 for gaseous diffusion enriched uranium. The normalized CO₂ emissions, in tonnes of CO₂ per GW_eh, ranges from 14 to 33 for the wind systems, 974 for coal, and 10 and 34 for nuclear fission using gas centrifuge and gaseous diffusion enriched uranium, respectively.     

小型水电站建设用地地质灾害评估技术研究——以湄尼多河小型水电站为例

现阶段,地质灾害评估技术人员在评估实践中,往往不注重各评估对象的差异性,采取同一评估模式,结果达不到评估的目的。在对小型水电站进行评估时,野外调查的重点,评估过程中所使用的方法以及危险性现状、预测及综合分区评估等与大型水电站、路线工程、矿山开采、民用建筑等工程有所不同。湄尼多河小型水电站工程位于云南省怒江州福贡县马吉乡境内,地质环境条件复杂,评估级别综合为二级。文章以该电站建设用地地质灾害危险性评估为例,对小型水电站建设用地地质灾害危险性评估的方法与理论进行探讨。     

Spectral Simulation and Conditioning to Local Continuity Trends in Geologic Modeling

Spectral simulation has gained application in building geologic models due to the advantage of better honoring the spatial continuity of petrophysical properties, such as reservoir porosity and shale volume. Distinct from sequential simulation methods, spectral simulation is a global algorithm in the sense that a global density spectrum is calculated once and the inverse Fourier transform is performed on the Fourier coefficient also only once to generate a simulation realization. The generated realizations honor the spatial continuity structure globally over the whole field instead of only within a search neighborhood, as with sequential simulation algorithms. However, the disadvantage of global spectral simulation is that it traditionally cannot account for the local information such as the local continuity trends, which are often observed in reservoirs and hence are important to be accounted for in geologic models. This disadvantage has limited wider application of spectral simulation in building geologic models. In this paper, we present ways of conditioning geologic models to the relevant local information. To account for the local continuity trends, we first scale different frequency components of the original model with local-amplitude spectrum ratios that are specific to the local trend. The sum of these scaled frequency components renders a new model that displays the desired local continuity trend. The implementation details of this new method are discussed and examples are provided to illustrate the algorithm.     

地震信号的相位恢复及误差分析

常见的几种地震子波有:零相位子波、最小相位子波、最大相位子波和混合相位子波。以不同类型的信号为激发子波,对不同地层模型合成地震道。仅用原始合成地震道记录的振幅谱来恢复原始记录,讨论不同方法下,由于激发子波的不同,对比分析原始记录与恢复记录的差异,及其恢复效果。     

基于GIS的供电台区经营综合评价

探讨了运用GIS技术对供电台区经营综合评价的实现方法,选取了业务属性和空间属性两个方面评价因子,介绍了从系统软硬件、评价实现过程及显示结果等方面评价过程的具体技术实现。     

基于广义Hough变换的不规则形状目标提取方法

提出了一种基于广义Hough变换的不规则形状目标的提取方法。该方法主要包括目标参数描述和目标提取两部分。实验表明，该方法精度好、效率高。     

基于复小波变换的SAR图像斑点滤波方法

斑点噪声的存在使得SAR图像的应用受到较大的限制.文中首先介绍了SAR图像斑点噪声模型以及几种常用的SAR斑点噪声抑制方法;然后对小波变换斑点噪声滤波方法进行分析,提出了基于二元树复小波变换的SAR图像滤波方法.实验比较表明,二元树复小波变换抑制SAR斑点噪声效果明显,较小波变换更具有优越性.