Study on copper complexing ligand concentrations in several China’s coastal waters

Copper complexing ligand concentrations in the Daya Bay, Qingdao coast, Jiaozhou Bay, South China Sea and Huanghe Estuary waters were determined by the anodic stripping voltammetry technique. The distribution regularity and the relationship with other parameters were discussed. The results were as follows: Copper complexing ligand concentrations of the South China Sea were a little higher than those of other sea areas, and they were apparently higher than those of the ocean. Compared with the subsurface layer (SSL) in the sea surface microlayer copper complexing ligand concentrations showed an enrichment phenomenon, of which the mechanism is similar to dissolved organic matter. The metal complexing ligand concentration profiles of the South China Sea showed that the value in the sea surface was the highest, then it decreased with depth accruing, and a higher value appeared at the bottom. Copper complexing ligand concentrations were higher than those of cadmium and lead. Ligands in each sea area exhibited a complicated property. In short, the distribution regularity of copper complexing ligand concentrations in China' s coastal waters was consistent with that of other regions in the world. Meanwhile, the positive relationship between the copper complexing ligand concentrations and biological oxygen demand, chemical oxygen demand, dissolved organic carbon, and viscosity were found clearly.     

Evaluation of bending moments and shear forces at unit connections of very large floating structures using hydroelastic and rigid body analyses

This paper investigates the characteristics of bending moments, shear forces and stresses at unit connections of very large floating structures (VLFS) under wave loads. The responses of VLFS are calculated by solving multi-body motion equation considering hydroelasticity and connection stiffness. Hydroelastic responses are calculated by the direct method. Higher-order boundary element method (HOBEM) is used for fluid analysis and finite element method (FEM) is introduced for structural analysis. The equation of motion is modified to describe the unit connections by employing spring elements. Bending moments and shear forces at the connections are obtained from the dynamic equilibrium condition for pressures and inertia forces. Two types of VLFS units such as tandem arranged units and side-by-side arranged units are considered in the numerical examples. The influences of connection stiffness, wave frequency and heading angle on responses of VLFS are investigated through the numerical examples. Rigid body analysis along with hydroelastic analysis is also carried out in the numerical analysis and comparison of those two approaches is discussed.     

一种带自由面的三维船体贴体网络的数值生成

本文提出了一个生成自由面的三维船体贴体网格的数值方法。文中以静水面以上的船体型线作为描述非定常自由面的计算网格域，进一步完善了我们以往开发的无法考虑兴波与静水面以上的船体型线相互作用对船舶粘性流动影响的网格生成方法。静水面以上的初始自由面网格分别沿船面法线η及切线ζ方向的曲线长的指数进行分布，即可极方便地调节自由面在船面及静水面附近的网格间距，也保证了在数值离散三维Ｐｏｉｓｓｏｎ方程时具有相当好的收敛性。这种方法的特点是计算量相当小，尤其能极方便地控制网格在船面簿粘性层中及静水面附近的分布。以Ｓｅｒｉｅｓ６０船模作为计算算例，带自由面的网格分布是相当满意的     

Distribution of dissolved species and suspended particulate copper in an intertidal ecosystem affected by copper mine tailings in Northern Chile

The coastline near Chañaral in Northern Chile is one of the most highly Cu-contaminated zones in the world due to discharges from mining activities for more than 60 years. The speciation of Cu has been studied to determine the importance of organic complexation in highly contaminated areas, and to assess the likely physiological impacts of Cu on marine organisms. Dissolved Cu concentrations of up to 500 nM were measured, completely saturating organic ligands and leading to free Cu²⁺ concentrations in excess of 10^− 8 M. These values are higher than those reported in any other marine environment, and because they occur over an extensive area, provide a unique opportunity to study the effects of Cu on marine ecosystems and to see how Cu behaves when its speciation is predominantly inorganic. We found strong gradients in free Cu²⁺ between Chañaral and adjacent areas with lower Cu, where speciation is dominated by organic complexation. There is also a significant increase in the partitioning of Cu onto suspended particles in the contaminated areas, consistent with previous studies that showed that organic ligands stabilize Cu in the dissolved phase, whilst “excess” Cu is rapidly scavenged. Those high dissolved Cu concentrations persist in spite of solid phase partitioning and advective processes along this open-ocean coastline, suggesting that Cu inputs into the system are still very large. Measurements were made using anodic stripping voltammetry with a thin mercury film coated with Nafion, which previous workers have shown can mitigate ambiguity in the data arising from inadvertent reduction of organic complexes. Our findings suggest that this is a useful methodology for contaminated systems.     

An experimental method for determining the frequency-dependent added mass and added mass moment of inertia for a floating body in heave and pitch motions

Most of the existing relevant materials have been obtained from experiments, in which evaluating the added mass at the resonant frequency corresponding to the peak of a frequency-response curve obtained from the “forced” vibration analysis is the most popular technique. In this paper, a simple experimental method was presented where the “free” vibration responses instead of the “forced” ones were used to determine the values of m_ah and I_ap. The main part of the experimental system is composed of a floating body (model) and a spring–shaft shaker. The “free” vibration of this main part was induced by imposing on it an initial displacement (and/or an initial velocity), and from the time histories of displacements information such as the “damped” natural frequencies, damping ratios, sectional added mass coefficients (C_V and C_P) were obtained. Since the displacements of the spring–shaft shaker are “translational” and those of the floating body due to pitch motions are “angular”, a technique for the transformation between the associated parameters of the two components of the main part was presented.     

McCreary和Fickian湍扩散形式差异的分析

用矩阵方法,求解McCreary和Fickian铅垂向湍扩散形式下,无界海洋条件时在风应力和深层浮力作用下的线性解。得出不同的湍扩散系数A情况下McCreary与Fickian湍扩散形式的流场结构。指出随湍扩散系数的增加,McCreary和Fickian湍扩散形式下u分量结构及其量值差异增大。在Fickian湍扩散形式下,能量穿越密度跃层的传递能力较强。当A=0.1cm~2s~(-3)时,在风应力和深层浮力作用下两种湍扩散形式造成流场的差异很小。提出在小湍扩散系数下,用McCreary湍扩散形式研究热带海洋环流,其结果和Fickian形式应相当一致。     

抑制栉孔扇贝第一极体对受精卵染色体行为及胚胎倍性组成的影响

采用细胞松弛素B（CB）处理，栉孔扇贝（Chlamys ferreri）抑制其受精卵的第一极体（PB1），研究抑制PB1对受精卵减数分裂过程及胚胎倍性组成的影响。结果发现，抑制第一极体显著改变了受精卵的染色体行为，在第二次减数分裂过程中共发现4种典型染色体分离类型，分别是三极分离（41．7％）、二极分离（11．7％）、双二极分离（24．9％）和非同步分离（2．8％），其余的受精卵（19．0％）染色体分离行为紊乱。对4-8细胞期胚胎的倍性组成进行分析，发现处理组中含有二倍体（10．9％）、三倍体（12．5％）、四倍体（19.5％）、五倍体（12．6％）以及非整倍体（46．6％）胚胎。研究结果表明，二极分离和双二极分离分别是形成三倍体和四倍体的主要机制，而其他的染色体分离行为将主要形成非整倍体。     

台湾东北海域冷水块的特征

根据海洋调查历史资料 ,对台湾东北海域冷水块的时空分布、结构、特点进行分析 ,主要结果如下 :(1 )首次利用卫星跟踪漂流浮标的轨迹 ,佐证冬季该冷水块的存在。 (2 )鉴于该冷水的重要性 ,建议对它给予称谓 ,暂定名为“彭花棉”冷水块。 (3 )该冷水块是黑潮次表层水涌升的结果 ,是黑潮对我国近海海洋环境影响的典型实例之一。 (4)该冷水块具有低温、高盐、高密、低氧、高磷、高硅和高氮等特性