陕西蓝田地区三趾马化石新材料

刘东生等60多年前描述的在陕西蓝田灞河组下部的Hipparion sp., 材料较少, 但形态特殊, 此后一直未见相关报道。近年来在这一地区又发现了类似三趾马化石的新材料。新发现的Hipparion sp. 个体小, 原尖短、圆, 次尖明显偏向舌侧, 次尖颈收缩, DP4的次尖几乎完全孤立; 原小尖褶长大复杂, 次附尖粗大、分叉, 向外伸出; 端附尖长大, 根部收缩, 内侧收缩沟内伸, 并呈复杂的褶沟。这些组合特征与包括Hipparion chiai在内的灞河组上部3种三趾马扁长的原尖截然不同, 也区别于九老坡的Hipparion plocodus(Hipparion fossatum), 而接近于大庙沟的Hipparion sp.。新材料的发现表明灞河早期的这种形态比较特殊的三趾马可能延续到了灞河晚期, 甚至更晚的时代, 同时在白鹿塬西侧蓝田汤峪河道一带有新近系地层出露。     

浅论马鞍山地区的膨胀土

膨胀土由于粘土矿物含量较多,在一定气候条件下其体积随含水量的增加而膨胀,随含水一的减少而收缩,以膨胀土为地基的低层建筑物常常成群开裂,笔者首次报道了马鞍山地区的膨胀土,并对该区膨胀土的分布,成因,评价方法和防治措施等提出了初步看法。     

地电化学异常形成机理初探

一直以来,人们都倾向认为地电化学方法取得的异常是由其吸附的金属离子引起,文中通过多个矿区地电化学试验发现,电提取微量元素异常往往与Fe、Al等常量元素异常高度一致,而Fe、Al等常量元素是组成粘土矿物的主要成分. 进一步对地电化学泡塑样品开展扫描电镜观测,发现电提取后泡塑载体样品中存在大量的大小从数微米至数十微米的粘土矿物颗粒. 由此初步推断,当前所使用的地电化学方法取得的异常很大程度上是由土壤中存在的具有电活动性的极细粒粘土矿物颗粒引起,地电化学提取过程对这些粘土矿物颗粒具有选择性吸附.     

粉质黏土堤防漫溢溃决试验

为研究粉质黏土堤防漫溢溃决破坏过程及其对水流要素和土体性质的响应规律,以河道流量、筑堤土体含水率和孔隙率为变量,在弯道水槽中开展了9组堤防漫溢溃决概化试验.通过试验发现,粉质黏土堤漫溢溃决溃口发展过程可分为垂向侵蚀和横向扩宽两个阶段,垂向侵蚀阶段以"陡坎"后退为主要形式;筑堤土体含水率与孔隙率不仅影响了溃口垂向侵蚀以及横向扩宽速度,而且决定了溃口最终形态,河道流量主要影响堤防溃口的横向扩宽速度;溃口处流速以及下游水位变化受溃口高度的制约.拟合得到土体黏聚力与土体含水率、孔隙率的相关关系式;通过试验数据提出了由土体黏聚力和水流参数表达的"陡坎"侵蚀后退速度计算公式,证明具有一定合理性.     

Evaluation of stress strain non-uniformities in the laboratory direct simple shear test specimens using 3D discrete element analysis

The direct simple shear (DSS) device is one of the commonly used laboratory element testing tools to characterize the shear behaviour of soil. The interpretation of results from an element test requires understanding of the degree of stress and strain non-uniformities in a given test specimen. So far, studies on stress and strain non-uniformities in the DSS test have been conducted using direct boundary measurements of stresses in laboratory specimens supported by a continuum based analytical approach. Discrete element modelling now provides a means of modelling the soil behaviour in a realistic manner using a particulate approach. Accordingly, the performance of a DSS specimen was modelled using discrete element modelling with emphasis on assessing stress and strain non-uniformities in the specimen during shearing. The approach allowed for the numerical determination of stresses not only at the boundaries, but also within the DSS specimen. It was shown that mobilised stress ratio distribution throughout the shearing phase for the majority of specimen volume at locations near the central planes parallel and perpendicular to the direction of shearing is fairly uniform. Finally, it was noted that the potential for particle slippage at locations near the specimen centre can result in non-uniform shear strain distributions.     

常用锂同位素地质标准物质的多接收器电感耦合等离子体质谱分析研究

锂同位素研究是非传统稳定同位素地球化学研究的前沿,已广泛应用于从地表到地幔的岩石圈及流体等固体地球科学的研究领域。准确测定锂同位素比值是应用该同位素体系的前提。本文报道了国际上7种常用地质标准物质(BHVO-2、JB-2、BCR-2、AGV-2、NKT-1、L-SVEC、IRMM-016)的锂同位素组成数据。分析中采用硝酸-氢氟酸混合酸消解岩石标准样品,通过3根阳离子交换树脂(AG50W-X8,200~400目)填充的聚丙烯交换柱和石英交换柱对锂进行分离富集,利用Neptune型多接收器电感耦合等离子体质谱(MC-ICPMS)测定锂同位素比值,使用标准-样品交叉法(SSB)校正仪器的质量分馏。实验得到这7种常用地质标准物质的锂同位素组成与测试精度(2SD)分别为:δ7LiBHVO-2—L-SVEC=4.7‰±1.0‰(n=53),δ7LiJB-2—L-SVEC=4.9‰±1.0‰(n=20),δ7LiBCR-2—L-SVEC=4.4‰±0.8‰(n=8),δ7LiAGV-2—L-SVEC=6.1‰±0.4‰(n=14),δ7LiNKT-1—L-SVEC=9.8‰±0.2‰(n=3),δ7LiL-SVEC—L-SVEC=-0.3‰±0.3‰(n=10),δ7LiIRMM-016—L-SVEC=0.0‰±0.5‰(n=10),这些数据在误差范围内与国际上已发表的数据一致。Li同位素分析精度可以达到大约0.5‰,长期的分析精度即外部重现性≤±1.0‰,达到了国际同类实验室水平。7种常用地质标准物质的锂同位素组成数据的发表为锂同位素研究提供了统一的标准,使地质样品的锂同位素数据的质量监控成为可能。在基质效应的研究中,使用不同量的IRMM-016配制的标准溶液过柱,深入探讨了样品量对锂同位素测定值的影响,结果表明,在现有测试精度下,只要分析样品的锂含量达到100μg/L,且不超过树脂的承载量,样品的锂同位素组成在误差范围内与真值吻合,样品量的大小不影响锂同位素测定结果的准确性。     

Comprehensive study of the drying behavior of Boom clay: Experimental investigation and numerical modeling

This paper presents a thermo‐hydro‐mechanical framework to model the drying behavior of Boom clay. First, the experimental campaign conducted Noémie Prime is briefly presented because it is used to validate the model. The data acquisition and processing is emphasized because of the use of X‐ray microtomography to be able to more accurately compare experimental and numerical strain fields. The different submodels are introduced. Numerical simulations are performed to illustrate the capability of the proposed model to reproduce the observed behavior. Finally, a comprehensive sensitivity study on several key model parameters associated with the water retention curve, and the permeability of the medium, is performed to get a better understanding of the physics behind the coupled model.     

Dynamics of unsaturated poroelastic solids at finite strain

We derive the governing equations for the dynamic response of unsaturated poroelastic solids at finite strain. We obtain simplified governing equations from the complete coupled formulation by neglecting the material time derivative of the relative velocities and the advection terms of the pore fluids relative to the solid skeleton, leading to a so‐called u^s ? p^w ? p^a formulation. We impose the weak forms of the momentum and mass balance equations at the current configuration and implement the framework numerically using a mixed finite element formulation. We verify the proposed method through comparison with analytical solutions and experiments of quasi‐static processes. We use a neo‐Hookean hyperelastic constitutive model for the solid matrix and demonstrate, through numerical examples, the impact of large deformation on the dynamic response of unsaturated poroelastic solids under a variety of loading conditions. Copyright © 2011 John Wiley & Sons, Ltd.     

深部细粒碎屑岩储层成岩作用研究——以苏北盆地张家垛油田阜三段为例

毗邻烃源岩的细粒储层,由于其岩石结构、组分及沉积环境的特殊性,成岩作用表现出一定差异。本文以张家垛油田阜三段细粒碎屑岩储层为例,通过铸体薄片、X射线衍射、扫描电镜等相关分析,研究其成岩作用的特殊性。研究结果表明:(1)细粒储层的成分成熟度和结构成熟度较高,常被泥岩包裹,在压实作用中若存在欠压实,粒间孔可以被很好地保留下来;(2)细粒储层形成时水动力较弱,杂基含量高导致微孔较多;(3)大量的粘土矿物使孔隙比表面增加,抑制了后期硅质和碳酸盐胶结物的析出;(4)比表面的增加减缓了孔隙流体的对流速率和扩散速率,不利于次生孔隙的形成,粒度越细,次生孔隙越不发育。细粒碎屑岩储层有别于常规储层,对其特殊的成岩作用进行研究具有重要的理论价值和实际意义。     

非饱和上海软土水力和力学特性耦合弹塑性模拟

目前大多数非饱和土的弹塑性本构模型用非饱和击实土的试验结果进行验证,但现场其他类型的土,如沉积土经常有在非饱和状态下外部环境变化的情况。现有的非饱和土弹塑性模型是否适用于沉积土一类的现场土是需要研究的课题。进行非饱和上海第③层土的吸力控制排水排气三轴剪切试验,使用文中提出的能统一考虑非饱和土水力性状和力学性状的弹塑性本构模型,预测上述三轴试验结果,并与试验数据进行比较。比较结果显示,建立的本构模型能够很好地预测非饱和上海软土的水力和力学性质,说明该模型不仅可以适用击实土的预测,还能够很好地适用于其他类型非饱和土的水力和力学性质的模拟。