Discriminating between pore‐filling load and bed‐structure load: a new porosity‐based method,exemplified for the river Rhine

Sediments contained in the river bed do not necessarily contribute to morphological change. The finest part of the sediment mixture often fills the pores between the larger grains and can be removed without causing a drop in bed level. The discrimination between pore‐filling load and bed‐structure load, therefore, is of practical importance for morphological predictions. In this study, a new method is proposed to estimate the cut‐off grain size that forms the boundary between pore‐filling load and bed‐structure load. The method evaluates the pore structure of the river bed geometrically. Only detailed grain‐size distributions of the river bed are required as input to the method. A preliminary validation shows that the calculated porosity and cut‐off size values agree well with experimental data. Application of the new cut‐off size method to the river Rhine demonstrates that the estimated cut‐off size decreases in a downstream direction from about 2 to 0·05 mm, covariant with the downstream fining of bed sediments. Grain size fractions that are pore‐filling load in the upstream part of the river thus gradually become bed‐structure load in the downstream part. The estimated (mass) percentage of pore‐filling load in the river bed ranges from 0% in areas with a unimodal river bed, to about 22% in reaches with a bimodal sand‐gravel bed. The estimated bed porosity varies between 0·15 and 0·35, which is considerably less than the often‐used standard value of 0·40. The predicted cut‐off size between pore‐filling load and bed‐structure load (D_c,p) is fundamentally different from the cut‐off size between wash‐load and bed‐material load (D_c,w), irrespective of the method used to determine D_c,p or D_c,w. D_c,w values are in the order of 10^?1 mm and mainly dependent on the flow characteristics, whereas D_c,p values are generally much larger (about 10⁰ mm in gravel‐bed rivers) and dependent on the bed composition. Knowledge of D_c,w is important for the prediction of the total sediment transport in a river (including suspended fines that do not interact with the bed), whereas knowledge of D_c,p helps to improve morphological predictions, especially if spatial variations in D_c,p are taken into account. An alternative to using a spatially variable value of D_c,p in morphological models is to use a spatially variable bed porosity, which can also be predicted with the new method. In addition to the morphological benefits, the new method also has sedimentological applications. The possibility to determine quickly whether a sediment mixture is clast‐supported or matrix‐supported may help to better understand downstream fining trends, sediment entrainment thresholds and variations in hydraulic conductivity.     

Origin and mechanisms of K–Si-metasomatism of ca. 3.4–3.3 Ga volcaniclastic deposits and implications for Archean seawater evolution: Examples from cherts of Kittys Gap (Pilbara craton, Australia) and Msauli (Barberton Greenstone Belt, South Africa)

The effects of K–Si-metasomatism during the formation of Early Archean replacement cherts have been quantified in this study by the investigation of two well-known stratigraphic sections: the Msauli chert (MC, Barberton greenstone belt, South Africa) and the Kittys Gap chert (KGC, Pilbara craton, Western Australia). The KGCs have a dacitic precursor similar to Duffer Formation dacites (Pilbara craton), while the MCs are derived from Al-depleted komatiites similar to those from the Weltevreden Formation (Barberton greenstone belt). Mass balance calculations reveal that the volcaniclastic deposits had initial porosities of up to 85 vol.% for the KGC and of 65 vol.% for the MC. Secondary porosities (27 vol.%: MC, 8 vol.%: KGC) produced during K-metasomatism are proportional to the dissolution of Fe, Ca, Mg-rich glass and precursor minerals. Komatiites have a higher chemical exchange potential than dacites, each gram releasing 1.2 mmol Fe²⁺, 2.8 mmol Mg²⁺, 1.4 mmol Ca²⁺ and 1.1 mmol Na⁺ to seawater, together with 4.4 mmol O²⁻. K-metasomatism of 1 g of komatiite further implies an uptake of 0.67 mmol of K⁺ and 2.7 mmol of H⁺. The highest silica uptake is achieved for the KGC (82 mmol/g of precursor). This silica enrichment most likely operated in the water column and at the sediment–water interface by sorption mechanisms on the surface of detrital particles and particulate organic matter, as a result of seawater silica-saturation. Acidic conditions (pH 5.5–6.5) and hot temperatures (>70 °C) favored the formation of K-rich phyllosilicates by interaction with seawater during the early diagenetic alteration of the volcaniclastic particles. The widespread occurrence of K–Si-metasomatism in volcanic and sedimentary rocks can be regarded as a general alteration process of the Early Archean seafloor, with a major influence on seawater composition. The highly K-selective metasomatism confirms previous studies suggesting that the Archean ocean was acidic and probably in equilibrium with a CO₂-rich atmosphere.     

江西浒坑钨矿含矿石英脉的地质特征及成矿构造演化

位于赣西武功山地区的江西浒坑钨矿是一个大型石英脉型钨矿床,与赣南典型的“五层楼”模式不同,矿脉主要集中在岩体内接触带。含矿石英脉除了普通的块状构造以外,还普遍存在条带状构造。详细的野外编录和镜下研究表明含矿块状石英脉在形成后遭受不同程度的韧性剪切,从而形成不同成分的分异条带。剪切带以出现新生的面理和线理（拉伸线理）为特征。岩石学研究表明条带状矿石属于糜棱岩,具有丰富的塑性变形显微构造特征。通过对含矿石英脉的构造解析,认为与岩浆岩有关的原生节理系统基本上是同时形成的,沿节理充填的石英脉经历了长期的、多期次的构造运动,从而形成了复杂的石英脉和矿石类型。建立了原生节理形成→石英充填→韧性剪切发生→二期石英充填→脆性碎裂的矿区构造演化序列。韧性剪切作用的动力学背景可能是受后期岩浆侵入的影响,最后的脆性破裂应与区域上存在南北向的压应力有关。     

Recharge source and hydrogeochemical evolution of shallow groundwater in a complex alluvial fan system,southwest of North China Plain

Many cities around the world are developed at alluvial fans. With economic and industrial development and increase in population, quality and quantity of groundwater are often damaged by over-exploitation in these areas. In order to realistically assess these groundwater resources and their sustainability, it is vital to understand the recharge sources and hydrogeochemical evolution of groundwater in alluvial fans. In March 2006, groundwater and surface water were sampled for major element analysis and stable isotope (oxygen-18 and deuterium) compositions in Xinxiang, which is located at a complex alluvial fan system composed of a mountainous area, Taihang Mt. alluvial fan and Yellow River alluvial fan. In the Taihang mountainous area, the groundwater was recharged by precipitation and was characterized by Ca–HCO₃ type water with depleted δ¹⁸O and δD (mean value of −8.8‰ δ¹⁸O). Along the flow path from the mountainous area to Taihang Mt. alluvial fan, the groundwater became geochemically complex (Ca–Na–Mg–HCO₃–Cl–SO₄ type), and heavier δ¹⁸O and δD were observed (around −8‰ δ¹⁸O). Before the surface water with mean δ¹⁸O of −8.7‰ recharged to groundwater, it underwent isotopic enrichment in Taihang Mt. alluvial fan. Chemical mixture and ion exchange are expected to be responsible for the chemical evolution of groundwater in Yellow River alluvial fan. Transferred water from the Yellow River is the main source of the groundwater in the Yellow River alluvial fan in the south of the study area, and stable isotopic compositions of the groundwater (mean value of −8.8‰ δ¹⁸O) were similar to those of transferred water (−8.9‰), increasing from the southern boundary of the study area to the distal end of the fan. The groundwater underwent chemical evolution from Ca–HCO₃, Na–HCO₃, to Na–SO₄. A conceptual model, integrating stiff diagrams, is used to describe the spatial variation of recharge sources, chemical evolution, and groundwater flow paths in the complex alluvial fan aquifer system.     

Deep-seated gravitational slope deformations and their influence on consequent mass movements (case studies from the highest part of the Czech Carpathians)

Gravitational spreading of mountain ridges displays primary disequilibrium of flysch mountain areas of the Czech Carpathians. The progression of various types of mass movements is a product of long-term ridge disintegration and is predisposed by the geological structure of the area and the upper Tertiary-Quaternary morphogenesis of the mountain area. Deep-seated slope deformations are spatially interconnected by the occurrence of some other types of slope deformations (e.g. debris flows, debris slides, slumps, rock avalanches, etc.), which pose a considerable risk for the existence of human society. An important causative factor in these dynamically developing hazardous processes is, among other factors, the way in which land has been used in the last three centuries. Therefore, the occurrence of various types of slope deformations is studied in terms of their relation to deep-seated gravitational deformations and in terms of other limiting factors (structural geological, morphological and climatic factors, manmade impacts, etc.). The paper presents several case studies of slope deformations (Velká Čantoryje Mt, Lysá hora Mt, Ropice Mt and Smrk Mt) in the area of the Outer Carpathians within the territory of the Czech Republic and also adverts to some consequences in terms of the socioeconomic structure of the landscape.     

墨西哥湾GC238区冷泉碳酸盐岩的微结构与石化微生物特征

采于墨西哥湾GC238海底天然气渗漏区浅表层的冷泉碳酸盐岩呈结核状产出,由方解石微晶和胶结物及少量的黄铁矿构成。胶结物由直径为0.1～0.5 m的方解石化的球体、卵形体、棒状体组成,充填于方解石晶体之间。冷泉碳酸盐岩结核下表面发育有由方解石化的球体、卵形体、棒状体组成的薄层,其中的一些球状集合体（约5 m）断面显示发育有核和外壳的层圈结构。黄铁矿呈草莓状,也具有相似的层圈结构。这种层状结构与活体古细菌被硫酸盐还原细菌包裹的层圈结构相似。样品中所保存的球体、卵形体、棒状体及其所组成的层圈结构可能是石化的甲烷氧化古细菌和硫酸盐还原细菌。     

甘新交界红柳河蛇绿岩形成和侵位年龄的准确限定及大地构造意义

采用锆石SHRIMP U-Pb同位素定年方法,获得新甘交界红柳河蛇绿岩中的堆晶辉长岩年龄为516.2±7.1Ma,代表了红柳河蛇绿岩的形成年龄;侵入到红柳河蛇绿岩中未变形变质的黑云母花岗岩的年龄为404.8±5.2Ma,限定了红柳河蛇绿岩侵位的上限。作为南天山洋壳的残骸,红柳河蛇绿岩新的可靠年龄数据表明,南天山洋在早寒武世已经开始形成,并于早泥盆世埃姆斯阶之前在红柳河地区已经闭合。上述洋盆演化过程对进一步研究东天山的大地构造演化具有重要的意义。     

Glass inclusions in volcanic rocks in the Okinawa Trough back-arc basin:constraints on magma genesis and evolution

INTROOUcr1ONThe Okinawa Trough is a typical marginal back-arc basin, where its oPening began in rela-tively recent years* There is a great controversy about the origin of its initial magYna. haltand acid volcanic pumice make up the bimedal volcanism in the Okinawa Trough. MOSt of geol-ogists believed that the acid pumice was the preduct of extremely crystal fractionation of baseltInagTna, but the others argued that it should com from the melting of lower-crust. Som de-tailed petrolOgic…     

试论东海陆架盆地的基底构造演化和盆地形成机制

本文主要根据东海陆架盆地和周边的地质、地球物理资料,分析盆地的基底岩性特征、结构特征。认为东海陆架盆地的基底除元古界片麻岩外,还分布有一定范围的中生界及古生界。基底构造特征是纵向上多层次,横向上不均一,南北有别,东西分带。构造演化上经历了张、合、压、扭等复杂过程。