陕北新庄地区延长组长2油层组储层特征

一般河道砂体的正粒序性决定了其下部物性条件优于上部，但新庄地区长2油层组河道砂体的物性特征截然相反，而是中上部物性条件好，下部物性条件普遍差。在储层岩石学特征、孔隙类型等研究的基础上，对此进行了探讨，认为造成其特殊性的原因主要是由于压实、胶结、次生加大等作用。指出河道边滩砂体中上部储层为该区的主力储层。     

Risk analysis of landslides – A case study

The effects of uncertainty due to the variability of soil parameters on the risk of landsliding in the Himalayan region are investigated using a random field model combined with slope stability analyses. Effects of spatial variability both in horizontal and vertical directions, number of test samples, variations in piezometric level and the influence of earthquake on the reliability of a typical slope in a slide area are investigated. The results show that the reliability of slopes in the slide area is significantly affected by the coefficients of variation of soil parameters, spatial variations of soil parameters, number of test samples and piezometric variations. The results also show that the assumption of isotropic variations to assess slope reliability isconservative. The results of the study are useful in providing guidelines and pointing to remedial measures in the form of sub-surface drainage to improve slope reliability in the area.     

淮安市典型土动力特性的试验研究

通过对淮安市典型的全新世沉积粉土和粘性土进行室内自振柱试验及粉土的动三轴液化试验，把粉土和粘性土的自振柱试验结果与Seed和Idriss建议的砂土及饱和粘土的剪切模量比G／Gmax-γ曲线和阻尼比λ-γ曲线的变化范围进行对比，结果表明：粉土的剪模量比要比饱和粘土的大，而比砂土的剪模量比要小，其阻尼比接近于砂土的阻尼比；粘性土的剪模量比要比一般饱和粘土的大，而与砂土的剪模量比相近，其阻尼比要比砂土的略低；粉土的抗液化强度与液化振次之间的关系可以用指数函数来表示，其振动孔隙水压力的发展规律可以用反正弦三角函数拟合；粘粒含量是影响淮安市全新世沉积粉土抗液化强度的主要影响因素。     

安山岩中黄铜矿矿石分析和制硫酸铜工艺的研究

安山岩中的黄铜矿是庐江中生代陆相火山热液型铜矿床的原生矿，矿石中主要伴生黄铁矿及少量斑铜矿、赤铁矿和褐铁矿。物相分析结果，黄铜矿的粒度很细，只有细磨才能单体解离；它在矿石中分布极不均匀，且与脉石矿物接触疏松，适于粗磨抛尾。物性分析结果，黄铜矿在４００～５３０℃、斑铜矿在４５０～６００℃、黄铁矿在５００～６８０℃氧化分解。实验研究表明，矿石经磨碎磁选，大部分的粗粒级的铁矿物能够回收；粗磨抛尾可获得铜、硫的粗精矿；然后再经硫酸化焙烧、酸浸、过滤、提纯、浓缩结晶可制得工业级硫酸铜。浸渣做炼铁原料，黄钾铁矾做Ｆｅ２Ｏ３颜料，有时还可回收金、银。     

Dissolved carbon in pore waters from the carbonate barrier reef of Tahiti (French Polynesia) and its basalt basement

This paper deals with dissolved inorganic carbon (DIC) and organic carbon (DOC) in pore waters from a 150 m deep hole drilled through the carbonate barrier reef of Tahiti and its underlying basalt basement. Alkalinity-pH measurements were used to calculate the DIC species concentration, and DOC was analysed according to the high temperature catalytic oxidation technique. Salinity was used as a conservative tracer to help identify water origin and mixing within the hole. Water mixing, calcium carbonate dissolution and mineralization of organic carbon combined to form three distinct groups of pore water. In the deeper basalt layers, pore water with alkalinity of 1.4 meq kg^–1 pH of 7.6 and p(CO₂) of 1.2 mAtm was undersaturated with respect to both aragonite and calcite. In the intermediate carbonate layer, pore water with alkalinity of more than 2.0 meq kg^–1, pH of 7.70 and p(CO₂) of 1.4 mAtm was supersaturated with respect to both aragonite and calcite. The transition zone between those two groups extended between 80 and 100 m depth. The shift from aragonite undersaturation to supersaturation was mainly attributed to the mixing of undersaturated pore waters from the basalt basement with supersaturated pore waters from the overlaying limestone. In the top of the reef, inputs from a brackish water lens further increased p(CO₂) up to 5.6 times the atmospheric P(CO₂).     

Hydrous pyrolysis of a Type III source: fractionation effects during primary migration in natural and artificially matured samples

A core from the Cambay Shale Formation of the Cambay Basin, containing immature Type III organic matter, was pyrolysed at 300°C for different durations of time to different maturation levels. Fractionation effects were studied employing a three-step extraction technique after removal of the expelled pyrolysate. The extractable organic matter (EOM) obtained on extraction of the whole core is assumed to be that present in open pores, while that obtained on finely crushing the sample is assumed to be that present in closed pores. The EOM obtained from 1 cm chips is termed EOM from semi-open pores. The gross composition of the pyrolysates expelled during pyrolysis is not similar to the oils reservoired in the area, and there is no significant fractionation observed between expelled pyrolysates and unexpelled EOM. Our study indicates movement of fluids between closed, semi-open and open pores. In both systems, there is a higher concentration of EOM in open pores than in semi-open and closed pores, and the fraction of EOM in open pores is much greater in the artificial system than in the natural system. Fractionation effects on n-alkane and isoprenoid hydrocarbon-based parameters were also studied. n-Alkenes are present in semi-open and closed pores of the immature core and in the core after it was pyrolysed to 300°C for 6 and 48 h, but are absent in the open pores. n-Alkenes are present in closed pores in the naturally matured core. Presence of n-alkenes in the pyrolysates expelled during the 6 and 48 h experiments, but their absence in the open pores of the core, indicates that expulsion also occurs through temporary microfractures during laboratory pyrolysis, whereas in the natural system expulsion from closed pores seems to be only via semi-open and open pores.     

A Study on Organic Inclusions in Clastic Reservoir Rocks and Their Application to the Assessment of Oil and Gas Accumulations

Terrigenous clastic reservoir rocks are widespread in China,and nearly all the industrial oil and gas accumulations in eastern China occur in the clastic rocks.The study shows that organic inclusions are mostly distributed in the secondary fissures and pores which were ormed in the process of oil-rock interaction,rather than in the cements or secondary enlargements. The organic inclusions are dominantly organic gas-rich or are composed of pure hydrocarbons.Homogenization temperatures range mainly from 120℃ to 130℃，which shows a relatively high maturity of organic matter.Vertical and horizontal temperature changes provide the grounds for the investigation of basin evolution and thermal fluid-kinetics-model.Fluorescence spectral characteristics o the organic inclusions indicate that oils and gases in the area studied probably have experienced two-stage or two-time migration.Micro-fluorescence rescearch is one of the effective approaches to oil/source correlation and oil migration-stage determination.The abundance and occurrence of organic inclusions is one of the indicators of oil and gas abundance and accumulation in rock layers.With the help of other informatio,organic inclusions can provide the basis for the prospective assessment of oil and gas in clastic reservoir rocks.     

Coal-generated oil in Tuha Basin

The Turpan-Harmi (abbreviated to Tuha below) Basin is a typical basin of coal-generated oil accumulation in China. The Middle-Lower Jurassic coal measures are considered the main source beds. Hence, both desmocollinite and suberinite are considered the contributors for coal-generated oil. Principal geochemical features of the crude oil in the Tuha Basin are rich in alkanes (70%—80%), high pristane/phytane ratio (6—8), abundant heavy carbon isotope (δ¹³C PDB= -26%–-23%) and absolute GP sterane predominance. The hydrocarbon generation process from the coal series is characterized by multistages, early generation and early expulsion.     

Monitoring and modelling of pore water pressure changes and riverbank stability during flow events

Pore water pressures (positive and negative) were monitored for four years (1996–1999) using a series of tensiometer‐piezometers at increasing depths in a riverbank of the Sieve River, Tuscany (central Italy), with the overall objective of investigating pore pressure changes in response to ?ow events and their effects on bank stability. The saturated/unsaturated ?ow was modelled using a ?nite element seepage analysis, for the main ?ow events occurring during the four‐year monitoring period. Modelling results were validated by comparing measured with computed pore water pressure values for a series of representative events. Riverbank stability analysis was conducted by applying the limit equilibrium method (Morgenstern‐Price), using pore water pressure distributions obtained by the seepage analysis. The simulation of the 14 December 1996 event, during which a bank failure occurred, is reported in detail to illustrate the relations between the water table and river stage during the various phases of the hydrograph and their effects on bank stability. The simulation, according to monitored data, shows that the failure occurred three hours after the peak stage, during the inversion of ?ow (from the bank towards the river). A relatively limited development of positive pore pressures, reducing the effective stress and annulling the shear strength term due to the matric suction, and the sudden loss of the con?ning pressure of the river during the initial drawdown were responsible for triggering the mass failure. Results deriving from the seepage and stability analysis of nine selected ?ow events were then used to investigate the role of the ?ow event characteristics (in terms of peak stages and hydrograph characteristics) and of changes in bank geometry. Besides the peak river stage, which mainly controls the occurrence of conditions of instability, an important role is played by the hydrograph characteristics, in particular by the presence of one or more minor peaks in the river stage preceding the main one. Copyright © 2004 John Wiley & Sons, Ltd.