Analysis of seabed instability using element free Galerkin method

Wave-induced seabed instability, either momentary liquefaction or shear failure, is an important topic in ocean and coastal engineering. Many factors, such as seabed properties and wave parameters, affect the seabed instability. A non-dimensional parameter is proposed in this paper to evaluate the occurrence of momentary liquefaction. This parameter includes the properties of the soil and the wave. The determination of the wave-induced liquefaction depth is also suggested based on this non-dimensional parameter. As an example, a two-dimensional seabed with finite thickness is numerically treated with the EFGM meshless method developed early for wave-induced seabed responses. Parametric study is carried out to investigate the effect of wavelength, compressibility of pore fluid, permeability and stiffness of porous media, and variable stiffness with depth on the seabed response with three criteria for liquefaction. It is found that this non-dimensional parameter is a good index for identifying the momentary liquefaction qualitatively, and the criterion of liquefaction with seepage force can be used to predict the deepest liquefaction depth.     

Influence of large-diameter pipe pile driving on surrounding marine soils and adjacent submarine pipelines

Abstract

With the large-scale development and utilization of ocean resources and space, it is inevitable to encounter existing submarine facilities in pile driving areas, which necessitates a safety assessment. In this article, by referring to a wharf renovation project as a reference, the surrounding soil response and buried pipe deformation during pile driving in a near-shore submarine environment are investigated by three-dimensional (3D) numerical models that consider the pore water effect. Numerical studies are carried out in two different series: one is a case of a single pile focusing on the effect of the minimum plane distance of the pile–pipe, and the other is a case of double piles focusing on the effect of the pile spacing.     

Investigation of the hydrate reservoir production under different depressurization modes

Abstract

Large reserves of natural gas hydrates exist, and the depressurization method has the greatest potential for gas hydrate reservoir recovery. Currently, the most commonly adopted depressurization simulation method is a constant bottom-hole pressure production scheme. This study proposes a new depressurization mode with decreasing bottom-hole pressure. The production characteristic was numerically investigated using this method. The results show the following: (1) As the depressurization exponent (n) decreases, the development effect improves, and production indexes including cumulative gas production/dissociation and gas-water ratio increase. However, the reservoir energy consumption is higher and the hydrate reformation is more severe. (2) Compared to the proposed depressurization mode, the hydrate production index of the constant bottom-hole pressure production (n?=?0) is better. However, the hydrate reservoir energy consumption is higher and the hydrate reformation is more severe using constant bottom-hole pressure production. (3) To achieve a balance between production and reservoir energy consumption during depressurization production, the bottom-hole pressure should be controlled by selecting a suitable depressurization exponent between n_min and n_max, which can be determined through numerical simulations.     

Relationship between Shot-Induced Noise and Shot Interval in Seismic Refraction Experiments at Sea

Seismic noise induced by the seismic source during continuous profiling reduces the signal-to-noise ratio and hence the data quality. This noise is largely dependent on the shot interval. In this paper, the noise amplitude of refraction seismic records from a special experiment is analysed as a function of the shot interval. An empirical exponential relationship between mean peak noise amplitude and shot interval is deduced. By increasing the shot interval, the induced noise can be minimized on all successive records. This results in an improvement of the data, predominantly the signal-to-noise ratio. Because the seismic signal and the shot-induced noise have nearly the same spectra, the chance of improving the signal-to-noise ratio by stacking is significantly reduced.     

Experimental Study on Friction Coefficient Between Concrete and the Top Surface of Rubble Mound Foundation

Experimental studies on the friction coefficient between concrete and the top surface of a rubble mound foundation in China are reviewed. Through comparison of different test results, the development of this research is comprehensively analyzed. An experiment is carried out in the condition similar to prototype. The process curve of friction coefficient with the test block sliding is analyzed and a standard for determination of the friction coetfficient is defined. The variation features of the friction coefficient are analyzed on the basis of the present experimental results and other studies in China. It is shown that the friction coettfficient between concrete and the top surface of a rubble mound foundation decreases with the increase of the foundation pressure, and the friction coettqcient for a very fine leveling bed is smaller than that for a fine leveling bed.     

Determination of the Critical Value of Deflection for Embedded Cylindrical Structures

An embedded cylinder is a large-diameter cylinder embedded in a soil foundation. The state of failure of such an embedded cylindrical structure shows large deflection instead of slide and overturn of the traditional gravity type of structure placed on a rubble base or foundation base. The critical value of deflection of the embedded cylindrical structure, which is the maximum allowable deflection for stability calculation of the cylinder, is a vital control value. Through investigation on deflection and soil pressures on an embedded cylinder by model experiments, the variations of the angle of rotation θ of a cylinder with effective anti-overturning ratio η and moment MH of thrust are discussed. On the basis of experimental study, the critical value of deflection of the cylindrical structure is proposed in the paper. Meanwhile, the formulas for calculating deflection of cylinders are derived.     

A higher-order σ-coordinate non-hydrostatic model for nonlinear surface waves

A higher-order non-hydrostatic model in a σ-coordinate system is developed. The model uses an implicit finite difference scheme on a staggered grid to simultaneously solve the unsteady Navier-Stokes equations (NSE) with the free-surface boundary conditions. An integral method is applied to resolve the top-layer non-hydrostatic pressure, allowing for accurately resolving free-surface wave propagation. In contrast to the previous work, a higher-order spatial discretization is utilized to approximate the large horizontal pressure gradient due to steep surface waves or rapidly varying topographies. An efficient direct solver is developed to solve the resulting block hepta-diagonal matrix system. Accuracy of the new model is validated by linear and nonlinear standing waves and progressive waves. The model is then used to examine freak (extreme) waves. Features of downshifting focusing location and wave asymmetry characteristics are predicted on the temporal and spatial domains of a freak wave.     

Seasonal variations in faunal distribution and activity across the continental slope of the goban spur area (NE Atlantic)

Density, biomass and community structure of macrofauna were estimated together with several sediment characteristics at seven stations ranging from 208 m to 4460 m water depth along the OMEX transect in the Goban Spur area (NE Atlantic) during three seasons (October 1993, May 1994, and August 1995). Median grain size decreased with increasing water depth and showed no differences between the seasons. The percentages of organic carbon and total nitrogen were highest at mid-slope depths (1000 to 1500 m), and were significantly higher in August at the upper part of the slope to a depth of 1500 m. The C:N ratio in the surface layer amounted to 7 to 8 in May, 10 to 12 in August and 14 to 17 in October at all stations (except the deepest at 4460 m, where it was 11 in May and August), indicating arrival of fresh phytodetritus in May, and therefore seasonality in food input to the benthos. Densities of macrofauna decreased exponentially with increasing water depth. Significantly higher densities of macrofauna were found in May at the upper part of the slope to a depth of 1500 m. These differences were mainly due to high numbers of postlarvae of echinoids at the shallowest station and ophiuroids at the deeper stations. Biomass values also decreased with increasing water depth, but biomass was relatively high at the 1000 m station and low at 1500 m, due to relatively high and low mean weights of the individual macrofaunal specimens. No significant differences in biomass were found between the seasons. Respiration was high (15 to 20 mgC·m⁻²·d⁻¹) in May at the upper part of the slope to a depth of 1000 m and low (1–3 mg C·m⁻²·d⁻¹) at the deeper part. At the shallowest stations to a depth of 1000 m respiration was highest in May, at the mid-slope stations (1400–2200 m) it was highest in August, whereas the deepest stations (3600 to 4500 m) did not show any differences in respiration rates. In conclusion; seasonal variation in organic input is reflected in denstiy, community structure and activity of the macrofauna along the continental slope in the NE Atlantic.     

沉积物镁铝含量比及其古气候意义

沉积物的镁铝含量比——m 值(m=100×MgO/Al_2O_3)与沉积水介质的盐度、pH 水温关系密切。当水温处在冰点以下时,沉积物的m 值随水温降低而增大。当水温处在冰点以上时,水介质的盐度、pH 和水温的增加,都有利于m 值增大。由于气候条件能直接或间接地影响沉积水介质的特征,因此,沉积物的m 值对古气候的变化具有一定的判别功能。通过对中国元古宙以来沉积物m 值的分析,发现古气候的热冷变化有1200Ma 的周期,其中还有次一级的热冷气候波动。第四纪的气候是处在热气候期后期的一个冷的气候波动阶段。